• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.5
• /
• pp.619-630
• /
• 2009

The study area investigated in this research is Hwaseong city, Gyeonggi-Do where small scale development is currently in progress. For the last three years, we carried out the environmental and ecological assessment by using data from The Ministry of Environment and Han River Basin Environmental Office. Most of development works in Hwaseong city, Gyeonggi-Do are small scale developments which are related with factory and distribution complex based on individual laws and regulations. However, environmental and ecological assessment is not being sufficiently reflected beforehand. Especially, because the development takes place mainly in the outskirts of the city, the fine forest is continuously being damaged. We analyzed changes in green zone caused by the developments. As a result, the percentage of original green zone was decreasing while the percentage of artificial green zone was increasing. We should maintain the percentage of the original green zone in order to conserve natural environment. In the past three years, the damage of the DGN (Degree of Green Naturality, 7) area that has high conservative value was little, but, there was serious damage in the area of DGN 6. In order to conserve natural environment, political and institutional investigation should be seriously carried out for mitigation of environmental and ecological damages.

• The Korean Journal of Ecology
• /
• v.6 no.2
• /
• pp.106-113
• /
• 1983

The growth of Korean axolotl., Hynobius leechii, was analyzed in natural water as control group and in six copper ion groups contaminated by 0.1, 0.2, 0.3, 0.4, 0.5, 0.6 ppm of copper ion. The copper ion checks the growth of the axolotl. The axolotl was not survived during 30 days in the copper ion of 0.3ppm, and, in the 0.4ppm the axolotl was not survived during 10 days after hatch. The growth of head width and body length show a convexing increase pattern, while that of hind leg shows a concaving increase pattern. The copper ion checks the development of hind leg. In the growth quantity of head width, body length and hid leg, that of natural water show the most rapid increase pattern, and copper ion groups of 0.1, 0.2, 0.3ppm follow in that order. The coefficient of relative growth($\alpha$) of control group is the greater value, and the copper ion groups of 0.1, 0.2, 0.3ppm follow in that order. The contaminated groups show the negative allometry in the relative growth of the containated groups to the natural water. Body length shows positive allometry, while hind leg shows negative allometry in the relative growth to head width.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.5
• /
• pp.1312-1322
• /
• 1999

The world of linearity, which is regular, predictable and irrelevant to time sequence in most natural phenomenon, is a very small part. In fact, signals generated from natural phenomenon with which we're in contact are showed only slight linearity. Therefore it is very difficult to understand and analyze natural phenomenon with only predictable and regular linear systems. Due to these reasons researches concerning non-linear signals that of analysis were excluded being regarded as noise are being actively carried out. Countless signals generated from nonlinear system have the information about itself, and analyzing those signals and get information from it, that will be able to be used effectively in so may fields. Hence, in this paper we used a higher order spectrum, especially the bispectrum. After we prove the validity applying bispectrum to logistic map, which is typical chaotic signal. Subsequently by showing the result applying for actual signal analysis of EEG according to auditory stimuli, we show that higher order spectra is a very useful parameter in analysis of non-linear signals and the result of EEG analysis according to auditory stimuli.

• Journal of Forest and Environmental Science
• /
• v.35 no.1
• /
• pp.1-5
• /
• 2019

Species diversity is one of the most important indices that used to evaluate the sustainability of forest communities. In the present study, three variables including number of individuals (frequency of species), basal area and volume of tree species were compared to estimate tree species diversity in broadleaves forests of Iran. Based on systematic random design, 30 plots (circle plot, $1000m^2$) was selected. Type of species, number of species, DBH and height of trees were measured. Simpson (1-D), Hill ($N_2$), Shannon-Wiener (H'), Mc Arthur ($N_1$), Smith-Wilson ($E_{var}$) and Margalef ($R_1$) indices used to estimate tree species diversity. Species diversity was calculated in each plot. ANOVA test showed that there was a significant difference between of three variables used for estimation of species diversity. Number of trees variable has more precision than basal area and volume variables to estimate of species diversity. But Duncan test revealed that there were significant difference between of basal area and volume variables with number of trees. Therefore, basal area and volume variables were selected as more suitable variables in order to estimate of biodiversity indices in northern forests of Iran.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.3
• /
• pp.296-306
• /
• 1992

$^{13}C$ spin-lattice relaxation times were measured for n-alkanes of moderate chain length, ranging from n-octane to n-dodecane, under the condition of proton broad-band decoupling within the temperature range of 248-318 K in order to gain some insight into basic features of segmental motions occurring in long chain ploymeric molecules. The NOE data showed that except for methyl carbon-13 dipole-dipole interactions between $^{13}C$ and directly bonded $^1H$ provide the major relaxation pathway, and we have analyzed the observed $T_1data$ on the basis of the internal rotational diffusion theory by Wallach and the conformational jump theory by London and Avitabile. The results show that the internal rotational diffusion constants about C-C bonds in the alkane backbone are all within the range of $10^9\;-10^10\;sec^{-1}$ in magnitude while the mean lifetimes for rotational isomers are all of the order of $10^{-11}\;-10^{-10}$ sec. Analysis by the L-A theory predicts that activation energies for conformational interconversion between gauche and trans form gradually increase as we move from the chain end toward the central C-C bond and they are within the range of 2-4 kcal/mol for all the compounds investigated.

• Structural Engineering and Mechanics
• /
• v.86 no.6
• /
• pp.765-778
• /
• 2023

This study investigates the free vibration and buckling analyses of isotropic curved plate structures fixed at all ends. The Kirchhoff-Love Plate Theory (KLPT) and Finite Element Method (FEM) are employed to model the curved structure. In order to perform the finite element analysis, a four-node quadrilateral element with 5 degrees of freedom (DOF) at each node is utilized. Additionally, the drilling effect (θ_z) is considered as minimal to satisfy the DOF of the structure. Lagrange's equation of motion is used in order to obtain the first ten natural frequencies and the critical buckling values of the structure. The effects of various radii of curvatures and aspect ratio on the natural frequency and critical buckling load values for the single-bay and two-bay curved frames are investigated within this scope. A computer code based on finite element analysis is developed to perform free vibration and buckling analysis of curved plate frames. The natural frequency and critical buckling load values of the present study are compared with ANSYS R18.2 results. It has been concluded that the results of the present study are in good agreement with ANSYS results for different radii of curvatures and aspect ratio values of both single-bay and two-bay structures.

• Advances in aircraft and spacecraft science
• /
• v.9 no.4
• /
• pp.301-318
• /
• 2022

This paper presents the free vibration analysis of 3D printed sandwich beams by using high-order theories based on the Carrera Unified Formulation (CUF). In particular, the component-wise (CW) approach is adopted to achieve a high fidelity model of the printed part. The present model has been used to build an accurate database for collecting first natural frequency of the beams, then predicting Young's modulus based on an inverse problem formulation. The database is built from a set of randomly generated material properties of various values of modulus of elasticity. The inverse problem then allows finding the elastic modulus of the input parameters starting from the information on the required set of the output achieved experimentally. The natural frequencies evaluated during the experimental test acquired using a Digital Image Correlation method have been compared with the results obtained by the means of CUF-CW model. The results obtained from the free-vibration analysis of the FDM beams, performed by higher-order one-dimensional models contained in CUF, are compared with ABAQUS results both first five natural frequency and degree of freedoms. The results have shown that the proposed 1D approach can provide 3D accuracy, in terms of free vibration analysis of FDM printed sandwich beams with a significant reduction in the computational costs.

• Journal of Environmental Science International
• /
• v.8 no.3
• /
• pp.399-409
• /
• 1999

The three domestic natural zeolites(Yong dong-ri (Y), Daesin-ri (D), Seogdong-ri (S)) harvested in Kyeongju-shi and Pohang-shi, Kyungsangbug-Do, were pretreatd with each of the NaOH, $Ca(OH)_2$ and NaOH following HCl solutions, and the removal performances of divalent haevy metals(Cu, Mn, Pb, and Sr) for natural and pretreated zeolites were investigated and compared in the single and mixed solutions. The natural zeolite-heavy metal system attained the final equilibrium plateau within 20 min, irrespective of initial heavy metal concentration. The heavy metal uptakes increased with increasing initial heavy metal concentration and pH. The heavy metal uptakes for natural zeolites decreased in the following sequences : D>Y>S among the natural zeolites; Pb>Cu>Sr>Mn among the heavy metals. The pretreated zeolites showed higher heavy metal removal performances than natural zeolites and decreased in the order of NaOH, NaOH following HCl, $Ca(OH)_2$ treatment among the pretreatment methods. The heavy metal ion exchange capacity by natural and pretreated zeolites was described either by Freundlich equation or Langmuir equation, but it followed the former better than the latter. The heavy metal uptakes for natural zeolites decreased in the mixed solution, in comparing with those in the single solution and especially, the manganese uptake decreased greatly in the mixed solution. The pretreated zeolites showed the improved removal performances of heavy metals in the mixed solution than in the single solution and the heavy metal uptakes by those in the mixed solution showed the same trends in the single solution among the chemical treatment methods and heavy metals.

• Research in Community and Public Health Nursing
• /
• v.14 no.4
• /
• pp.617-628
• /
• 2003

Purpose: This study was to analyze the quality of life of married women practicing a natural family planning method based on given parameters in order to obtain some specific basic data for developing holistic programs to enhance the quality of life of married women practicing natural family planning. Methods: The subjects of this study were selected from married women who had been practicing natural family planning over two years. Data were collected from May 20 2001 to March 5 2002 using a structured questionnaire and interviews. The total number of subjects was 239. Collected data were analyzed using PC-SAS, which utilized descriptive statistics. In addition, LISREL 8.0 program was used to utilize covariance matrix. Results: The hypothetical model was reasonably fitted to commonly accepted data. Revision was required for the x2 value and RMR, and the model was revised by eliminating 6 paths. The revised model was fit well for commonly accepted data (x2 = 86.26, GFI = 0.97, NFl = 0.98, NNFI = 0.99, AGFI = 0.96, RMR = 0.02, CN= 422). Variables that influence the practice of natural family planning were communication of spouses, knowledge about natural family planning, self-efficacy and perceived benefits. Variables that control the quality of life were self-efficacy, internal health locus of control, attitude toward natural family planning, communication of spouses, perceived benefits and natural family planning behaviors. Conclusions: These findings prove that the quality of life of married women practicing natural family planning can be improved through developing programs that enhances communication of spouses, self-efficacy and perceived benefits.

• Steel and Composite Structures
• /
• v.26 no.1
• /
• pp.79-87
• /
• 2018

In order to study the natural vibration characteristics of steel-concrete composite truss beam (SCCTB), the influence of multiple factors such as interface slip, shear deformation and moment of inertia are considered. Afterwards, based on the Hamilton principle the vibration control differential equation and natural boundary conditions of SCCTB are deduced. By solving SCCTB differential equations of vibration control, an analytical calculation method is proposed for analyzing the natural vibration characteristics of SCCTB. The natural frequencies of SCCTBs with different degrees of shear connection and effective lengths are calculated by using the analytical method, and the results are compared against those obtained from ANSYS finite element numerical calculation method. The results show that the analytical method considering the influence factors such as interface slip, shear deformation and moment of inertia are in good agreement with those obtained from ANSYS finite element numerical calculation method. This evidences the correctness of the analytical method and show that the method proposed exhibits improvement over the previously developed theories for the natural vibration characteristics of SCCTB. Finally, based on the analytical method, the influence factors of SCCTB natural vibration characteristics are analyzed. The results indicate that the influence of interface slip stiffness on SCCTB's natural frequency is more than 10% and therefore cannot be neglected. Moreover, shear deformation has an effect of more than 35% on SCCTB's natural frequency and the effect cannot be ignored either in this case too.