• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.156-158
• /
• 2009

우리 연구팀은 $SiO_2$ nanospheres를 이용한 natural lithography를 통해 2가지 방법으로 GaAs 기판의 반사율을 감소시켰다. 먼저 GaAs 기판 위에 benzocyclobutene(BCB) 고분자를 코팅한 후, 그 위에 $SiO_2$ nanospheres를 코팅한다. 그리고 고분자의 유리전이 온도이상으로 가열하면 $SiO_2$ nanospheres가 고분자 속으로 가라앉게 되어 렌즈 형태의 표면이 형성된다. 또한, 이 상태에서 BOE 용액을 통해 $SiO_2$ nanospheres를 제거하여 오목한 형태의 표면을 형성할 수 있다. 이러한 2가지 방법의 surface texturing을 통해 우리는 GaAs 표면의 반사도를 각각 400~800nm의 파장에서 평균 13.6%~16.52%의 반사율을 얻을 수 있었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.110-110
• /
• 2017

Biological systems offer unique principles for the design and fabrication of engineering platforms (i.e., popularly known as "Biomimetics") for various applications in many fields. For example, the lotus leaves exhibit unique surfaces consisting of evenly distributed micro and nanostructures. These unique surfaces of lotus leaves have the ability of superhydrophobic property to avoid getting wet by the surrounding water (i.e., Lotus effect). Inspired by the surface topographies of lotus leaves, the artificial superhydrophobic surfaces were developed using various micro- and nanoengineering. Here, we propose new platforms that can control hydrophilic and hydrophobic property of surfaces by mimicking micro- and nanosurfaces of various natural leaves such as common camellia, hosta plantaginea, and lotus. Using capillary force lithography technology and polymers in combination with biomimetic design principle, the unique micro- and nanostructures mimicking natural surfaces of common camellia, hosta plantaginea, and lotus were designed and fabricated. We also demonstrated that the replicated polymeric surfaces had different hydrophilic and hydrophobic properties according to the mimicking the natural leaf surfaces, which could be used as a simple, but powerful methodology for design and fabrication of controlled hydrophilic and hydrophobic platforms for various applications in the field of agriculture and biological engineering.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.27-27
• /
• 2010

결정성과 전하 이동도가 우수한 CdTe 박막을 증착하기 위하여 근접승화법(CSS), chemical spraying법, 전착(electrodeposition)법, screen printing법, 화학기상증착(MOCVD)법 및 sputtering법등이 응용되고 있으며 이들 방법은 각기 다양한 장단점을 가지고 있다. CdTe 태양전지를 성장시키는 다양한 방법 중에서 본 발표는 CBD를 이용한 CdS와 CSS를 이용한 CdTe 박막 태양전지를 성장하는 방법을 포함한다. 다양한 조건에서 성장된 박막의 물성과 CdCl2와 열처리를 통한 성능개선에 대해 발표할 예정이다. 또한, 공기의 index와 박막의 index 차이가 크기 때문에, escape cone의 angle이 매우 작고, 박막의 경우 표면이 비교적 평평하기 때문에, 광소자(LED와 Solar Cell)는 표편 텍스처링이 성능을 향상시키기 위해 필요하다. Natural Lithography, Wet-etching, Dry-etching, index-grading을 이용하여, LED와 태양전지에서 uniform하고 대면적에 적용가능한 표면 택스처링 방법에 대해 발표할 예정이다.

• 한국정밀공학회지
• /
• 제29권2호
• /
• pp.161-169
• /
• 2012

Recently, a study for the functional surface production of super hydrophobic of natural and biomimetic artificial has attracted much attention. To make process methods of super hydrophobic surface has a variety of ways such as lithography, etching, and laser ablation. However, we were used ultra-shot pulse laser ablation process which has the virtue of more environmental friendliness and simple process. In this paper, we were fabricated a multiplicity of super hydrophobic patterns on mold surface(NAK80) using by optimizing the laser processing conditions and it was transferred on PDMS. Also, we measured contact angle super hydrophobic patterns on PDMS. The result showed there is no patterns on PDMS were measured 94 degrees, by contrast, optimized super hydrophobic patterns on PDMS was 157 degrees. Therefore we fabricated super hydrophobic surface on mold. Based on these experimental results, it is possible to mass production using ultra shot pulse laser ablation of super hydrophobic pattern and to be applied for a variety of industries.

• 소성∙가공
• /
• 제14권3호
• /
• pp.245-250
• /
• 2005

Recently, micro machining technology for high precision mold becomes more interested for mass production of high performance optical parts micro-grooved on the surface, which is under very active development due to its effectiveness in the view point of optical performance. Mechanical micro machining technology now has more competitiveness on lithography, MEMS or LIGA processes which have some problems to fabricate especially cylinder type of groove in such as lenticular lens for illumination angle modulation system. In this study. a lenticular lens mold with U-type micro groove is fabricated making utilizing of the benefit of the mechanical micro machining technology. A shaping machining process is adapted using 3 axis degree of freedom micro machining system and single crystal natural diamond tool. A brass and a electroless nickel materials are used for mold fabrication. Machining force, chip shape and machined surface are investigated from the experiment and an optimal machining condition is found based on the examined problems from the micro cutting process.

• KSTLE International Journal
• /
• 제7권1호
• /
• pp.14-17
• /
• 2006

In this paper, we report on the replication of surface topography of natural leaf of Lotus onto thin polymeric films using a capillarity-directed soft lithographic technique. PDMS molds were used to replicate the surface. The replication was carried out on poly(methyl methacrylate) (PMMA) film coated on silicon wafer. The patterns so obtained were investigated for their friction properties at micro-scale using a ball-on-flat type micro-tribo tester, under reciprocating motion. Soda lime balls (1 mm diameter) were used as counterface sliders. Friction tests were conducted at a constant applied normal load of $3000{\mu}N$ and speed of 1mm/s. All experiments were conducted at ambient temperature ($24{\pm}1^{\circ}C$) and relative humidity ($45{\pm}5%$). Results showed that the patterned samples exhibited superior tribological properties when compared to the silicon wafer and non patterned sample (PMMA thin film). The reduced real area of contact projected by the surfaces was the main reason for their enhanced friction property.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.379-382
• /
• 2007

The MEMS (Micro Electro Mechanical Systems) process is used in a micro/nano pattern manufacturing method. This method is based on the lithography technology. But the MEMS process has some problems such as complicated process, long processing time and high production costs. Many researchers are doing research in substitute manufacturing method to work out a solution to these problems. In this paper, we apply a dieless incremental forming technology to a substitute method of MEMS process. This dieless forming technology is using in the commercial scale sheet forming such as a prototype of automobile sheet parts. 5-axes CNC (Computerized Numeric Control) method are applied in this system to get a micro-scale dieless forming results. These 5-axes system are composed of precision AC servo motor stages (4-axes) and PZT actuator (1-axis). A PZT actuator is used in a precision actuating axis because it can be operated in the nano scale stroke resolution. This micro dieless incremental forming system has the advantage of minimization in manipulating distance and working space. As equipment and tools become smaller in size, minute inertia force and high natural frequency can be obtained. Therefore, high precision forming performance can be obtained. This allows the factory to quickly provide the customer with goods because the manufacturing system and process are reduced. To construct this micro manufacturing system, many technologies are necessary such as high stiffness frame, high precision actuating part, structural analysis, high precision tools and system control. To achieve the optimal forming quality, the micro dieless forming system is designed and made with high stiffness characteristic.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.647-659
• /
• 2008

콜로이드는 거시적으로 균일한 성질을 갖는 입자분산계이다. 콜로이드 입자는 다양한 입자분산계의 모델로서 많은 기초연구가 이루어져 왔을 뿐만 아니라, 산업적으로 다양하게 응용이 되었다. 최근에는 나노-바이오 관련 연구에 적용되어 새롭게 각광을 받고 있는 나노 소재중 하나이다. 본 총설에서는 입자 분산계의 정의 및 분류에 대해 간략히 기술하고, 나노-바이오 응용을 위한 표면 성질 및 표면 개질방법에 대해 다룰 것이다. 또한, 기존의 구형의 입자분산계에서 더 나아가, 모양과 크기가 제어된 입자 분산계의 합성에 관한 최근 결과를 소개하였다. 마지막으로, 콜로이드 입자의 나노-바이오 응용분야로서, 금속 콜로이드 잉크와, 3차원 콜로이드 결정을 활용한 나노-바이오 센서, 및 2차원 콜로이드 구조를 이용한 패턴제작과 응용 연구에 대해 살펴보았다.

• Korean Chemical Engineering Research
• /
• 제50권5호
• /
• pp.929-932
• /
• 2012

화면표시장치 제조에 널리 이용되고 있는 미세구조 제조향 노광공정을 대신할 기반기술을 개발하고자 한다. 저가의 Polycarbonate 기판에 미세구조를 제조하기 위하여, Spin Coating으로 Polystyrene 박막을 형성하고 박막 위에 Polydimethylsiloxane 주형으로 소프트석판술을 적용하였다. 제조된 구조에 나노입자들을 배열하기 위해 계면작용을 이용하고자 하므로, 구조의 표면을 화학반응에 의해 소수성으로 개질하였다. 소수성으로의 개질은 Polystyrene 표면을 과망간칼륨으로 처리하고 Aminopropyltriethoxysilane을 반응시켜서 수행되었다. 개질된 특성은 X선광전자분광기로 분석되었다. 개질된 표면에서 친수성나노입자들이 분산되어 있는 수용액을 마이크로리터 단위의 방울로 떨어뜨리고, 수용액을 증발시킨다. 증발과정에서 계면상호작용과 미세구조의 물리적 유도로 특정 영역에 나노입자들이 배열되었다. 그리고, 이 배열의 전기적 응용을 확인하였다.