• 대한치과교정학회지
• /
• 제30권5호
• /
• pp.535-542
• /
• 2000

본 연구는 안면비대칭 환자의 natural head position(NHP)시 정면에서의 두부 또는 경추의 경사 정도를 알아봄으로써 교정환자의 임상검사시 비대칭의 진단에 도움이 되고자 시행되었다. 두드러진 전후방 골격 이상은 없으나 뚜렷한 좌우 안면비대칭을 보이는 성인 20명을 비대칭군으로, 좌우 대칭적인 외모와 비교적 정상교합을 보이는 성인 21명 을 대칭군으로 선정 한 다음 물방울 수평계를 이용하여 NHP 상태의 정모두부방사선사진을 촬영하고 투사도를 작성하였다. Crista galli와 anterior nasal spine을 연결한 선과 crista galli와 menton을 연결한 선이 이루는 각을 menton의 변위 정도로 정하고, 좌우 supra-orbital margin의 최상방점을 지나는 supra-orbital line과, 제1경추와 제4경추의 중심을 연결한 cervical line이 각각 true vertical line과 이루는 각을 계측한 다음 이들간의 상관관계를 비교 분석하여 다음과 같은 결과를 얻었다. 1. Supra-orbital line이 true vortical line과 이루는 각이 직각에서 벗어난 정도가 대칭군에 비하여 비대칭군에서 통계적으로 유의하게 크게 나타났다. 2. Cervical line이 true vertical line과 이루는 각은 통계적 유의차는 없었으나 비대칭군에서 더 큰 경향을 보였다. 3. 비대칭군에서 supra-orbital line이 true vortical line과 이루는 각이 직각에서 벗어난 정도는 menton의 변위 정도와 통계적으로 유의한 순상관관계를 보였다. 이상의 결과로 안면비대칭 환자는 menton의 변위를 보상하려는 방향으로 기울어진 NHP를 가지는 경향이 있음을 알 수 있었다.

• The Journal of Advanced Prosthodontics
• /
• 제10권6호
• /
• pp.401-407
• /
• 2018

PURPOSE. When performing an occlusal procedure, it is recommended that the patient should be sitting straight with the head in a natural position. An inappropriate mandibular position caused by an incorrect occlusal record registration or occlusal adjustment can result in damaged teeth and cause functional disorders in muscles and temporomandibular joints. The purpose of this study was to clarify the influence of horizontal cephalic rotation on mandibular position by investigating the three-dimensional positions of condylar and incisal points. MATERIALS AND METHODS. A three-dimensional jaw movement measurement device with six degrees of freedom (the WinJaw System) was used to measure condylar and incisal points. The subjects were asked to sit straight with the head in a natural position. The subjects were then instructed to rotate their head horizontally $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, $40^{\circ}$, $50^{\circ}$and $60^{\circ}$ in the right or left direction. RESULTS. The results indicated that horizontal cephalic rotation made the condyle on the rotating side shift forward, downward, and toward the inside, and the condyle on the counter rotating side shift backward, upward, and toward the outside. Significant differences in deviations were found for angles of rotation higher than $20^{\circ}$. The incisal point shifted in the forward and counterrotating directions, and significant differences were found for angles of rotation higher than $20^{\circ}$. CONCLUSION. The mandibular position was altered by horizontal cephalic rotations of more than $20^{\circ}$. It is essential to consider the possibility of deviation of the mandibular position during occlusal procedures.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.33-35
• /
• 2005

We propose an eye gaze tracking system under natural head movements. The system consists of one CCD camera and two front-surface mirrors. The mirrors rotate to follow head movements in order to keep the eye within the view of the camera. However, the mirror controller cannot guarantee the fast head movements, because the frame rate is generally 30Hz. To overcome this problem, we applied Kalman predictor to estimate next eye position from the current eye image. In the results, our system allows the subjects head to move 50cm horizontally and 40cm vertically, with the speed about 10cm/sec and 6cm/sec, respectively. And spatial gaze resolutions are about 4.5 degree and 4.5 degree, respectively, and the gaze estimation accuracy is 92% under natural head movements.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권3호
• /
• pp.180-185
• /
• 2012

Purpose: An accurate preoperative analysis of the patient is essential in orthognathic surgery in order to acquire superior results. In profile, the location of the chin's position may change according to the neck's inclination. This may ultimately affect the amount of surgical movement. During acquisition of cephalometric radiographs, or in supine position, there is a discrepancy in the neck's inclination. This means that there are also various discrepancies between the actual profile and the various preoperative profile images. In the clinical situation, the decision in performing genioplasty usually lies in the analysis of the patient's profile on the operating table at the final stages of orthognathic surgery. This study aims to analyze the different preoperative profile images and to compare their discrepancies. Methods: Fifty eight patients undergoing orthognathic surgery were chosen. These patients were divided into three groups according to angle's classification of malocclusion, as class I, II or III. The right profile of these patients in centric occlusion was taken in natural head position (NHP). This was set as the 'actual profile image.' Another right profile image was taken on the operating table after insertion of the nasotracheal intubation and with muscle relaxants in effect. This was also taken in centric occlusion. The angle (denoted 'A') between the soft tissue glabella-pognion and the true vertical plane was found in the above-mentioned profile images and in the cephalometric radiographs. The differences of these values were analyzed. Results: There were differences in Angle 'A' in all of the preoperative images. These values were however, not statistically significant. Conclusion: In order to gain an esthetic profile during orthognathic surgery, the NHP is shown to be the most reliable position. Images reproducing such head positions should be used in the treatment planning process.

• The Journal of Korean Physical Therapy
• /
• 제25권4호
• /
• pp.217-223
• /
• 2013

Purpose: This study was to investigate whether the two different head postures, natural and ideal head posture, affect head/shoulder posture and muscle activity. Methods: Thirty healthy subjects with the forward head and round shoulder posture were participated in this study. This study utilized a within-subjects design with subjects being positioned into two sitting positions: natural head posture (NHP) and ideal head posture (IHP). Forward head angle (FHA) and forward shoulder angle (FSA) of each subject were measured for assessing the head/shoulder posture and muscle activities of upper trapezius (UT), lower trapezius (LT), and serratus anterior (SA) during the forward overhead reaching. Results: There were significant increases in both FHA and FSA after taking IHP, which showed greater angles than in taking NHP. In change of muscle activities, there were significant decreases in both LT and SA after taking IHP, which showed lower activities than in taking a NHP, whereas there was no significant change in UT. Conclusion: These findings demonstrate that postural alterations associated with forward head and rounded shoulder postures could alter scapular kinetics and muscle activity during the forward overhead reaching.

• 대한치과교정학회지
• /
• 제33권5호
• /
• pp.323-337
• /
• 2003

이 연구의 목적은 한국인의 연조직 측모두부방사선학적 기준치를 설정하고, 이를 성별간, 인종간 비교하여, 한국인의 치아안모 변이를 위한 교정적 진단과 치료계획을 확립하기 위한 한 가지 기준을 제안하고자 하는데 있다. 저자들은 균형 잡힌 안모를 가진 젊은 한국인 성 인 남녀 각 27명, 20명을 선발하였다. 이들의 평균연령은 남자 $23.8{\pm}2.6$세, 여자 $22.5{\pm}1.7$세였다. 높은 신뢰성과 재현성을 가진 natural head position에서 측모두부방사선사진을 촬영하였고, 필름을 트레이싱한 뒤 Arnett등이 소개한 분석요소들을 이용하여 계측하였다. 그 결과를 독립 모수 검정을 통하여 한국인 남녀를 우전 비교하였고, 한국인 남녀 각 군을Arnett등이 제시한 백인들의 남녀 기준치와 비교하였다. 그 결과로 부터 다음과 같은 결론을 얻을 수 있었다. 한국인 남자는 한국인 여자보다 전반적으로 비후한 하안모 연조직과 작은 비순각, 긴 안면고경, 깊은 측모상, 그리고 더 돌출된 하안모를 가지고 있었다. Amett등이 제시한 백인 기준치와의 비교에서는 한국인이 남녀 모두에서 덜 노출되는 상악 절치를 제외하고는 전반적으로 더 긴 안면 길이를 보였고, 더 짧은 측모 깊이를 보였다 또한 두 인종 모두 상악 구조물들은 TVL에서부터 유사한 수평적 위치에 있었으나, 한국인 군에서 유의성 있는 상악-하악간 전후방적 거리차를 나타내었다 이는 한국인이 백인에 비해 기준선인 TVL로부터 하악 구조물들이 상대적으로 더 후퇴되어 있음을 의미한다고 할 수 있다. 균형잡힌 안모를 가진 개체의 안면각은 성, 인종에 상관없이 170도 전후를 나타내어 보편적으로 신뢰할 만한 평가항목으로 사료되었다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제43권4호
• /
• pp.256-261
• /
• 2017

Objectives: The concept of natural head position (NHP) was first introduced by Broca in 1862, and was described as a person's stable physiologic position "when a man is standing and his visual axis is horizontal." NHP has been used routinely for clinical examination; however, a patient's head position is random during cone-beam computed tomography (CBCT) acquisition. To solve this problem, we developed an accelerometer to record patients' NHP and reproduce them for CBCT images. In this study, we also tested the accuracy and reproducibility of our accelerometer. Materials and Methods: A total of 15 subjects participated in this study. We invented an accelerometer that measured acceleration on three axes and that could record roll and pitch calculations. Recorded roll and pitch data for each NHP were applied to a reoriented virtual image using three-dimensional (3D) imaging software. The data between the 3D models and the clinical photos were statistically analyzed side by side. Paired t-tests were used to statistically analyze the measurements. Results: The average difference in the angles between the clinical photograph and the 3D model was $0.04^{\circ}$ for roll and $0.29^{\circ}$ for pitch. The paired t-tests for the roll data (P=0.781) and the pitch data (P=0.169) showed no significant difference between the clinical photographs and the 3D model (P>0.05). Conclusion: By overcoming the limitations of previous NHP-recording techniques, our new method can accurately record patient NHP in a time-efficient manner. Our method can also accurately transfer the NHP to a 3D virtual model.

• Journal of Oral Medicine and Pain
• /
• 제21권2호
• /
• pp.393-405
• /
• 1996

This study was performed to investigate the effects of changes of head posture and cervical spine shape on the mandibular resting or clenching electromyographic(EMG) activity in anterior temporalis(TA), masseter(MM), sternocleidomastoid muscle(SCM) and trapezius insertion(TI). 30 patients with Temporomandibular Disorders(TMDs) participated in this study. EMG activity($\mu$V) at rest and clenching was observed in four head postures, namely natural head posture(NHP), forward head posture(FHP), upward head posture(UHP), and downward head posture(DHP). For taking in upward or downward head posture head was inclined 10$^{\circ}$ upward or downward and CROM$^\textregistered$(cervical-range-of motion, Performance attainment Inc., USA) was used to maintain same posture during the procedure, and BioEMG$^\textregistered$ (Bioelectromyograph, Bioresearch Inc., USA) was used to record EMG activity in the above four muscles at eight locations on both sides. The recorded EMG activity($\mu\textrm{V}$) were compared and analyzed by cervical spine shape such as the head position from plum line, cervical curvature, and cervical inclination. Head position from plum line was measured in vertical plate calibrated with cm scale, comical curvature by radius was measured with adjustable curved ruler, and cervical inclination by cervical vertebrae tangent(CVT)was measured in lateral cephalograph. The results obtained were as follows : 1. Mean value of head position from plum line, cervical curvature, and cervical inclination were 4.8cm, 26.7cm, and 86.6$^{\circ}$, respectively, And There were no correlationship among these items. 2. For resting EMG activity by head posture, the value in anterior temporalis was higher at FHP than at DHP, the value in masseter was higher at FHP than at NHP, and DHP, the value in sternocleidomastoid muscle was higher at UHP than at NHP, and the value in trapezius insertion was higher at FHP and DHP than, NHP and UHP. The clenching EMG activity, however, did not show any difference by head posture. 3. Comparison of resting and clenching EMG activity between higher and lower groups by head position from plum line, cervical curvature, and cervical inclination did not show any significant difference. From this result, the author concluded that the cervical spine shape had not significantly affected to EMG activity in usual patients with TMDs.

• 대한정형도수물리치료학회지
• /
• 제20권1호
• /
• pp.1-7
• /
• 2014

Background: As the increase of forward head position, we studied the change of thickness of deep cervical flexor (DCF) compared of with sternocleidomastoid (SCM). we measured and analysed the change of thickness of the neck flexor for forward head position and cranio-cervical flexion exercise (CCFE). Methods: Using a cross-sectional design, we conducted the study selecting 35 healthy adults (12 males, 23 females). We measured the craniovertebral angle (CVA), instructed them to perform the CCFE, and measured the DCF and SCM using ultrasonography during the contraction and relaxation period. Results: Intra-reliability of SCM is .96, longus capitis is .92 and longus coli is .97. we compared according to the change of forward head position, Correlation of DCF is .841, and DCF/SCM is .754 by significant positive correlation. At the comparison of CCFE and Resting muscle thickness, SCM and DCF is .00, DCF/SCM is .68. Conclusion: There is a strong positive correlation between the change amount of DCF and DCF/SCM as the increase of CVA.

• Journal of Oral Medicine and Pain
• /
• 제24권2호
• /
• pp.189-206
• /
• 1999

This study was performed to investigate the factors affecting muscle activity and cephalometric variables according to change of head postures. For this study, 150 patients with temporomandibular disorders and 80 dental students without any signs and symptoms of temporomandibular disorders were selected as the patients group and as the normal group, respectively. Head position to body-midline in frontal plane and upper quarter posture to body plumb line in sagittal plane were observed clinically and electromyographic(EMG) activity of anterior temporalis, masseter, sternocleidomastoideus, and trapezius on clenching were recorded with $BioEMG^{(R)}$ in four head postures, which were natural head posture(NHP), forward head posture(FHP), $20^{\circ}$ upward head posture(UHP), and $20^{\circ}$ downward head posture(DHP). Cephaloradiographs were also taken in the same head postures as in EMG taking, but that was taken only in NHP for the patient group. Cephalometric variables measured were SN angle, CVT angle, atlas inclination angle, occlusal plane angle, Me-C2 angle, pharyngeal width, occiput~axis distance, area of pharyngeal space, and cervical curvature. The data were analyzed by SAS statistical program. The results of this study were as follows : 1. Between the patient and the normal group, there were significant difference in distance from plumb line to acromion, eye-tragus angle, electromyographic activity of the four muscles, and cephalometric variables of linear measurement. 2. There was no consistent pattern of correlation between upper quarter posture, EMG activity and cephalometric variables in any case without relation to cervical curvature and head position in frontal plane. 3. Sternocleidomastoid muscle only showed variation of electromyographic activty with changes of head postures, but all the muscles did show correlation with head postures. 4. All the cephalometric variables measured in this study showed difference of mean value by head posture, and CVT angle, pharyngeal width, occiput-atlas distance, and area of pharyngeal space showed correlation between these variables with change from NHP to FHP, and from NHP to UHP.