• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1199-1202
• /
• 2004

리튬이온전지 음극활질용으로 Hybrid of pitch based graphite impregnating natural graphite와 Hybrid of pitch based carbon impregnating natural graphite로 탄소전극을 제작하여 전기화학적인 특성을 연구하였다. Natural graphite에 pitch based graphite나 pitch based carbon의 혼합은 흑연의 이론용량인 372 mAh/g를 초과하는 고용량을 나타내었다. 이것은 극소공동에 리튬종의 삽입과 탈삽입에 의한 것으로 파악된다. 그러나 충 방전이 계속 진행되면서 방전용량이 급격히 저하되는 현상이 관찰되었다. X-선 회절분석 결과로부터 Hybrid of pitch based carbon impregnating natural graphite 탄소전극에는 amorphous carbon이 상대적으로 다량 존재한다는 것을 확인하였고, 이는 리튬의 삽입된 상태의 전위에 분포가 있어 충 방전시에 완만한 전압의 구배를 만들며, 비가역용량을 증가시키는 요인으로 파악되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 제6회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.27-30
• /
• 2004

Different types of hybrid negative materials on pitch based carbon and natural graphite for lithium ion batteries were studied. Two types of active materials were prepared, that is, pitch based graphite carbon, and pitch based carbon impregnating natural graphite. The specific capacity, capacity recovery in high temperature condition, and other electrochemical properties were achieved for these materials. We found that addition of natural graphite type to the pitch based carbon can significant1y improve the specific capacity and interfacial resistance. However, use of natural graphite will cause a serious capacity loss in the high temperature condition owing to its increasing interface resistance. The specific capacity ranged from 321 to 348 mAh/g and the maximum specific capacity was obtained in the case of pitch based carbon impregnating natural graphite.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2630-2634
• /
• 2014

The surface of natural graphite was modified by the use of hydrogen peroxide and evaluated as an anode material for lithium ion capacitors (LICs). The surface treatment was carried out under various ultrasonic conditions of 200, 300, and 400W, which were applied to a mixture of natural graphite and hydrogen peroxide solution for 1 h. While the bulk structure was maintained, the hexagonal symmetry and physical properties of natural graphite, such as BET surface area, tap density, and particle size, were affected by the surface treatment. FT-IR and XPS measurements confirmed the signature of C=O on the surface of graphite samples after treatment. Both the pristine and surface-treated graphites showed a similar reversible capacity of $370mAhg^{-1}$, and the coulombic efficiency of surface-treated graphite decreased with higher ultrasonic energies (89.1%, 89.0%, and 88.0% for 200, 300, and 400 W) comparing with pristine graphite (89.4%). The capacity retention of LICs was greatly improved with the treated natural graphite. The graphite treated under the ultrasonic energy of 300 W and pristine natural graphite showed capacity retention of 77.5% and 42.9%, implying that the surface treatment was an effective method for the improvement of natural graphite as an anode material for LICs.

• Carbon letters
• /
• 제11권2호
• /
• pp.90-95
• /
• 2010

Carbon materials such as graphite and graphene exhibit high electrical conductivity. We examined the electrical conductivity of synthetic and natural graphene powders after the chemical reduction of synthetic and natural graphite oxide from synthetic and natural graphite. The trend of electrical conductivity of both graphene (synthetic and natural) was compared with different graphite materials (synthetic, natural, and expanded) and carbon nanotubes (CNTs) under compression from 0.3 to 60 MPa. We found that synthetic graphene showed a marked increment in electrical conductivity compared to natural graphene. Interestingly, the total increment in electrical conductivity was greater for denser graphite; however, an opposite behavior was observed in nanocarbon materials such as graphene and CNTs, probably due to the differing layer arrangement of nanocarbon materials.

• KSTLE International Journal
• /
• 제10권1_2호
• /
• pp.43-47
• /
• 2009

Influences of carbonaceous ingredient as a solid lubricant in automotive friction materials on friction properties were studied. Three types of carbonaceous ingredients such as natural graphite, artificial graphite, and cokes were mixed using a constrained mixture design. A 1/5 scale brake dynamometer was used to obtain tribological properties. Results showed that cokes substantially increased the friction coefficient, and natural graphite effectively reduced stick-slip phenomena. This significant difference was attributed to the formation of the friction film on the brake pad which was shown to be strongly dependent on the graphite types. The different crystal structures of the carbonaceous solid lubricants played a significant role in the formation of friction film at the interface.

• Korean Chemical Engineering Research
• /
• 제59권3호
• /
• pp.410-416
• /
• 2021

본 연구에서는 천연 흑연의 용량과 안정성을 개선하기 위해 석유계 피치로 코팅된 천연 흑연을 제조하여 전기화학적 성능을 평가하였다. 천연흑연과 피치를 건식 스피드 믹서를 이용해 코팅하였으며, 믹서의 회전 속도, 시간, 흑연과 피치의 조성, 피치의 연화점을 변화시키면서 음극 활물질을 제조하였다. 제조된 음극 활물질의 물리적 특성은 SEM, TEM, PSD를 이용해 분석하였으며, 전기화학적 성능은 사이클, 율속, 임피던스, 순환전압 전류 테스트를 통해 조사하였다. 9000 RPM, 10 wt%, 2 h, 연화점 150 ℃ 조건에서 코팅된 천연 흑연을 0.1 C에서 전기화학적 특성을 테스트 하였을 때, 324.5 mAh/g 의 가장 높은 용량과 50 사이클 이후 98.9%의 용량 유지율을 보였다. 고속 충·방전을 위한 테스트에서는 5 C/0.1 C 용량 유지율은 80.3%로 나타났으며, 코팅되지 않은 천연흑연보다 약 1.7 배로 향상된 용량 유지율을 확인할 수 있었다.

• 한국자기학회지
• /
• 제22권1호
• /
• pp.11-14
• /
• 2012

Expanded graphite 산화물과 자성 나노입자의 복합화는 화학적 방법을 이용하였으며, Ni과 Co 나노입자를 사용하여 간단한 방법으로 자기적 특성을 가지는 graphite 산화물을 합성하였다. $H_2SO_4$에 $(NH_4)SO_4$을 첨가한 혼합 용액을 제조하여, natural graphite와 반응시키고, 1차 열처리하여 expanded graphite를 제조하였다. $1050^{\circ}C$에서 30초간 급속 2차 열처리와 화학적 산화 과정을 거쳐 expanded graphite oxide로 변화시킨 뒤에 $Ni(acac)_2$, $Co(acac)_3$과 화학적 반응을 통하여 Expanded graphite 산화물자성 나노입자 복합체를 제조하였다. 결정 구조 분석을 위하여 x-선 회절 측정을 수행하였으며, Raman 분광 측정으로 graphite 산화물의 층상 구조를 분석하였다. 미세구조 분석을 위하여 투과전자현미경 측정을 수행하였으며, 진동시료형 자화율측정기를 이용하여 복합체의 자기적 특성을 연구하였다. 이러한 연구 결과는 graphite 화합물과 자성 물질의 복합화를 위한 기저 기술로 활용될 수 있을 것이다.

• 한국재료학회지
• /
• 제25권6호
• /
• pp.279-287
• /
• 2015

In order to prepare anode materials for high power lithium ion secondary batteries, carbon composites were fabricated with a mixture of petroleum pitch and coke (PC) and a mixture of petroleum pitch, coke, and natural graphite (PC-NG). Although natural graphite has a good reversible capacity, it has disadvaantages of a sharp decrease in capacity during high rate charging and potential plateaus. This may cause difficulties in perceiving the capacity variations as a function of electrical potential. The coke anodes have advantages without potential plateaus and a high rate capability, but they have a low reversible capacity. With PC anode composites, the petroleum pitch/cokes mixture at 1:4 with heat treatment at $1000^{\circ}C$ (PC14-1000C) showed relatively high electrochemical properties. With PC-NG anode composites, the proper graphite contents were determined at 10~30 wt.%. The composites with a given content of natural graphite and remaining content of various petroleum pitch/cokes mixtures at 1:4~4:1 mass ratios were heated at $800{\sim}1200^{\circ}C$. By increasing the content of petroleum pitch, reversible capacity increased, but a high rate capability decreased. For a given composition of carbonaceous composite, the discharge rate capability improved but the reversible capacity decreased with an increase in heat treatment temperature. The carbonaceous composites fabricated with a mixture of 30 wt.% natural graphite and 70 wt.% petroleum pitch/cokes mixture at 1:4 mass ratio and heat treated at $1000^{\circ}C$ showed relatively high electrochemical properties, of which the reversible capacity, initial efficiency, discharge rate capability (retention of discharge capacity in 10 C/0.2 C), and charge capacity at 5 C were 330 mAh/g, 79 %, 80 %, and 60 mAh/g, respectively.

• Advances in materials Research
• /
• 제8권1호
• /
• pp.37-46
• /
• 2019

Electrochemical double layer capacitors (EDLCs) which are fabricated using carbon based electrodes have been emerging at an alarming rate to fulfill the energy demand in the present day world. Activated charcoal has been accepted as a very suitable candidate for electrodes but its cost is higher than natural graphite. Present study is about fabrication of EDLCs using composite electrodes with activated charcoal and Sri Lankan natural graphite as well as a gel polymer electrolyte which is identified as a suitable substitute for liquid electrolytes. Electrochemical Impedance Spectroscopy, Cyclic Voltammetry and Galvanostatic Charge Discharge test were done to evaluate the performance of the fabricated EDLCs. Amount of activated charcoal and natural graphite plays a noticeable role on the capacity. 50 graphite : 40 AC : 10 PVdF showed the optimum single electrode specific capacity value of 15 F/g. Capacity is determined by the cycling rate as well as the potential window within which cycling is being done. Continuous cycling resulted an average single electrode specific capacity variation of 48 F/g - 16 F/g. Capacity fading was higher at the beginning. Later, it dropped noticeably. Initial discharge capacity drop under Galvanostatic Charge Discharge test was slightly fast but reached near stable upon continuous charge discharge process. It can be concluded that initially some agitation is required to reach the maturity. However, the results can be considered as encouraging to initiate studies on EDLCs using Sri Lankan natural graphite.

• 전기화학회지
• /
• 제12권2호
• /
• pp.162-166
• /
• 2009

탄소 피복된 Si/Cu 분말을 기계적인 볼-밀링(ball-milling) 방법과 고온에서 탄화수소가스 분해 방법에 의해 제조하여 리튬이차전지용 음극으로 사용하였고 이에 대한 전기화학적 거동을 조사하였다. 천연흑연(natural graphite)을 이용하여 탄소 피복된 Si/Cu/graphite 복합체 음극소재를 제조하였으며 천연흑연 음극소재와 전기화학적 특성을 비교하였다. 탄소 피복된 Si/Cu 음극의 가역적 비용량은 초기 10 싸이클까지 지속적인 증가를 나타냈다. 탄소 피복된 Si/Cu/graphite 복합체 음극의 가역적 비용량은 $0.25mA/cm^2$ 전류밀도에서 450mAh/g이고 초기 싸이클 효율은 81.3%로 나타났다. 복합체 음극의 싸이클 성능은 가역적인 비용량값을 제외하고 천연흑연 음극과 유사하게 나타났다.