• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2006년도 춘계 학술발표회 논문집 제3권1호(통권3호)
• /
• pp.227-232
• /
• 2006

This paper investigate the optimum thickness distribution of plate structure with different essential boundary conditions in the fundamental natural frequency maximization problem. In this study, the fundamental natural frequency is considered as the objective function to be maximized and the initial volume of structures is used as the constraint function. The computer-aided geometric design (CAGD) such as Coon's patch representation is used to represent the thickness distribution of plates. A reliable degenerated shell finite element is adopted calculate the accurate fundamental natural frequency of the plates. Robust optimization algorithms implemented in the optimizer DoT are adopted to search optimum thickness values during the optimization iteration. Finally, the optimum thickness distribution with respect to different boundary condition

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.451-456
• /
• 1997

Temperature distribution measurements in the mockup apparatus of reactor vessel were performed to determine the effective thermal conductivity of porous media with different geometry and to obtain the experimental data for the heat transfer processes by natural convection occurring in the air duct. The temperature distributions at four separated sections with different arrangements of porous media have different slopes according to the geometrical configuration. From the measured temperature distribution, effective thermal conductivity have been derived using the least square fitting method. The test at air duct was performed to the high heat removal at 3.4kW/$m^2$ by the natural convection from the outer wall to the air. And also the temperature distributions in the air duct agree well with the 1/7th power-law turbulent temperature distribution. The obtained heat transfer data have been compared with the Shin's and Sieger's correlations.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.855-859
• /
• 2007

It is essential to obtain accurate and highly reliable streamflow data for water resources planning, evaluation and management as well as design of hydraulic structures. A new discharge estimation method, which is named 'non-dimensional velocity distribution and index-velocity method,' was proposed in this research. This method showed very close channel discharges which were calculated with the exiting velocity-area method. When velocity-area method is used to estimate channel discharge, it is required to observe point velocities at every desired point and vertical using a current meter like Price-AA. However 'non-dimensional velocity distribution and index-velocity method' is used, it become optional to observe point velocities at every desired point and vertical. But this method can not be applied for the cases of very complex and strongly asymmetric channel cross-sections because non-dimensional velocity distribution by entropy concept may be quite biased from that of natural rivers.

• Smart Structures and Systems
• /
• 제19권3호
• /
• pp.309-322
• /
• 2017

In this paper, the buckling, and free vibration analysis of tapered functionally graded carbon nanotube reinforced composite (FG-CNTRC) micro Reddy beam under longitudinal magnetic field using finite element method (FEM) is investigated. It is noted that the material properties of matrix is considered as Poly methyl methacrylate (PMMA). Using Hamilton's principle, the governing equations of motion are derived by applying a modified strain gradient theory and the rule of mixture approach for micro-composite beam. Micro-composite beam are subjected to longitudinal magnetic field. Then, using the FEM, the critical buckling load, and natural frequency of micro-composite Reddy beam is solved. Also, the influences of various parameters including ${\alpha}$ and ${\beta}$ (the constant coefficients to control the thickness), three material length scale parameters, aspect ratio, different boundary conditions, and various distributions of CNT such as uniform distribution (UD), unsymmetrical functionally graded distribution of CNT (USFG) and symmetrically linear distribution of CNT (SFG) on the critical buckling load and non-dimensional natural frequency are obtained. It can be seen that the non-dimensional natural frequency and critical buckling load decreases with increasing of ${\beta}$ for UD, USFG and SFG micro-composite beam and vice versa for ${\alpha}$. Also, it is shown that at the specified value of ${\alpha}$ and ${\beta}$, the dimensionless natural frequency and critical buckling load for SGT beam is more than for the other state. Moreover, it can be observed from the results that employing magnetic field in longitudinal direction of the micro-composite beam increases the natural frequency and critical buckling load. On the other hands, by increasing the imposed magnetic field significantly increases the stability of the system that can behave as an actuator.

• 한국축산식품학회지
• /
• 제37권4호
• /
• pp.579-592
• /
• 2017

This study assessed the quantitative microbial risk of non-enterohemorrhagic Escherichia coli (EHEC). For hazard identification, hazards of non-EHEC E. coli in natural and processed cheeses were identified by research papers. Regarding exposure assessment, non-EHEC E. coli cell counts in cheese were enumerated, and the developed predictive models were used to describe the fates of non-EHEC E. coli strains in cheese during distribution and storage. In addition, data on the amounts and frequency of cheese consumption were collected from the research report of the Ministry of Food and Drug Safety. For hazard characterization, a doseresponse model for non-EHEC E. coli was used. Using the collected data, simulation models were constructed, using software @RISK to calculate the risk of illness per person per day. Non-EHEC E. coli cells in natural- (n=90) and processed-cheese samples (n=308) from factories and markets were not detected. Thus, we estimated the initial levels of contamination by Uniform distribution ${\times}$ Beta distribution, and the levels were -2.35 and -2.73 Log CFU/g for natural and processed cheese, respectively. The proposed predictive models described properly the fates of non-EHEC E. coli during distribution and storage of cheese. For hazard characterization, we used the Beta-Poisson model (${\alpha}=2.21{\times}10^{-1}$, $N_{50}=6.85{\times}10^7$). The results of risk characterization for non-EHEC E. coli in natural and processed cheese were $1.36{\times}10^{-7}$ and $2.12{\times}10^{-10}$ (the mean probability of illness per person per day), respectively. These results indicate that the risk of non-EHEC E. coli foodborne illness can be considered low in present conditions.

• 대한치과보철학회지
• /
• 제30권4호
• /
• pp.582-610
• /
• 1992

The long-term success of any dental implant is dependent upon the optimization of stresses which occur during oral function and parafunction. Especially, it has been suggested that there is an unique set of problems associated with joining an osseointegrated implant and a natural tooth with a fixed partial denture. For this particular case, although many literatures suggest different ways to avoid high stress concentrations on the bone surrounding the implant under static and dynamic loading conditions, but few studies on the biomechanical efficacy of each assertion have been reported. The purpose of this investigation was to evaluate the efficacies of clinically suggested methods on stress distribution under static load and shock absorption under dynamic load, using two dimensional finite element method. In FEM models of osseointegrated implant-natural tooth supported fixed partial dentures, calculations were made on the stresses in surrounding bone and on the deflections of abutments and superstructure, first, to compare the difference in stress distribution effects under static load by the flexure of fastening screw or prosthesis, or intramobile connector, and second, to compare the difference in the shock absorption effects under dynamic load by intramobile connector or occlusal veneering with composite resin. The results of this analysis suggest that : 1. Under static load condition, using an implant design with fastenign screw connecting implant abutment and prosthesis or increasing the flexibility of fastening screw, or increasing the flexibility of prosthesis led to the .increase in height of peak stresses in cortical bone surrounding the implant, and has little effect on stress change in bone around the natural tooth. 2. Under static load condition, intramobile connector caused the substantial decrease in stress concentration in cortical bone surrounding the implant and the slight increase in stress in bone around the natural tooth. 3. Under dynamic load condition, both intramobile connector and composite resin veneering showed shock absorption effect on bone surrounding the implant and composite resin veneering had a greater shock absorption effect than intramobile connector.

• ALGAE
• /
• 제36권4호
• /
• pp.263-283
• /
• 2021

To explore the ecophysiological characteristics of the kleptoplastidic dinoflagellate Shimiella gracilenta, we determined its spatiotemporal distribution in Korean coastal waters and growth and ingestion rates as a function of prey concentration. The abundance of S. gracilenta at 28 stations from 2015 to 2018 was measured using quantitative real-time polymerase chain reaction. Cells of S. gracilenta were detected at least once at all the stations and in each season, when temperature and salinity were 1.7-26.4℃ and 9.9-35.6, respectively. Moreover, among the 28 potential prey species tested, S. gracilenta SGJH1904 fed on diverse prey taxa. However, the highest abundance of S. gracilenta was only 3 cells mL^-1 during the study period. The threshold Teleaulax amphioxeia concentration for S. gracilenta growth was 5,618 cells mL^-1, which was much higher than the highest abundance of T. amphioxeia (667 cells mL^-1). Thus, T. amphioxeia was not likely to support the growth of S. gracilenta in the field during the study period. However, the maximum specific growth and ingestion rates of S. gracilenta on T. amphioxeia, the optimal prey species, were 1.36 d^-1 and 0.04 ng C predator^-1 d^-1, respectively. Thus, if the abundance of T. amphioxeia was much higher than 5,618 cells mL^-1, the abundance of S. gracilenta could be much higher than the highest abundance observed in this study. Eurythermal and euryhaline characteristics of S. gracilenta and its ability to feed on diverse prey species and conduct kleptoplastidy are likely to be responsible for its common spatiotemporal distribution.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.359-359
• /
• 2017

A new soybean cyst nematode, H. sojae was reported from Korea in 2016. This species is closely related to H. glycines which has the same host plant. Morphological observations of the cyst, female, male and second-stage juveniles indicated that this species is differed from H. glycines. Especially, cysts of H. sojae appeared more round, shining and darker than that of H. glycines. The distribution of this new cyst nematode in soybean field in Korea is unknown so far. In 2016, 270 soil samples were collected from soybean fields and examined the existence of H. glycines and H. sojae. Total of 111 samples contained cysts (41.1%). Among them 77% were H. glycines and 23% were H. sojae. H. sojae is future threatening in soybean production area.

• Journal of Ecology and Environment
• /
• 제29권1호
• /
• pp.17-22
• /
• 2006

Since the demands not only for value-added timber but the environmental functions of forests had been increased, native tree species has been, and is rapidly being replaced by foreign tree species in many parts of the world. However, the studies on population structure and regeneration characteristics of native tree species were not conducted enough. Regeneration of Kalopanax septemlobus growing among other hardwoods in natural forests is very difficult because of its low seed viability and germination rate. The study examined the distribution of mature trees of K. septemlobus and their regeneration pattern at the 1.12 ha study plot in natural deciduous broad-leaved forest of Mt. Jeombong. The density and mean DBH of K. septemlobus was 97 trees per ha and 32 cm, respectively. The spatial distribution of K. septemlobus showed a random pattern (aggregation index is 0.935) in the 1.12 ha study plot. The age of 90 trees among 99 sample trees of K. septemlobus ranged from 90 to 110 years and represented a single cohort, thus suggesting that K. septemlobus in advance regeneration has regenerated as a result of disturbances such as canopy opening.

• 생태와환경
• /
• 제45권4호
• /
• pp.420-443
• /
• 2012

An Individual-Based Model (IBM) was developed by employing natural and toxic survival rates of individuals to elucidate the community responses of benthic macroin-vertebrates to anthropogenic disturbance in the streams. Experimental models (dose-response and relative sensitivity) and mathematical models (power law and negative exponential distribution) were applied to determinate the individual survival rates due to acute toxicity in stressful conditions. A power law was additionally used to present the natural survival rate. Life events, covering movement, exposure to contaminants, death and reproduction, were simulated in the IBM at the individual level in small (1 m) and short (1 week) scales to produce species abundance distributions (SADs) at the community level in large (5 km) and long (1~2 years) scales. Consequently, the SADs, such as geometric series, log-series, and log-normal distribution, were accordingly observed at severely (Biological Monitoring Working Party (BMWP<10), intermediately (BMWP<40) and weakly (BMWP${\geq}50$) polluted sites. The results from a power law and negative exponential distribution were suitably fitted to the field data across the different levels of pollution, according to the Kolmogorov-Smirnov test. The IBMs incorporating natural and toxic survival rates in individuals were useful for presenting community responses to disturbances and could be utilized as an integrative tool to elucidate community establishment processes in benthic macroin-vertebrates in the streams.