• Childhood Kidney Diseases
• /
• v.4 no.1
• /
• pp.40-47
• /
• 2000

Purpose: Renal involvement is the most important prognostic factor of HSP. Therefore, the pathogenesis and prognostic factors in renal involvement have been studied by many researchers. The aim of this study was to evaluate the clinical risk factors and the role of TNF-$\alpha$ in renal involvement of HS purpura. Methods: The subjects of this study were 12 patients of HS purpura, 7 patients of HS nephritis, and 5 age-matched controls. We have analysed the rist factors for renal involvement in clinical symptoms and collected the sera and urines of all subjects in acute and convalescent stage. The concentration of TNF-$\alpha$ in the collected sera and urines were measured by sandwich ELISA and compared with that of age-matched controls. Results: Statistical analysis showed that persistent purpura increased the risk of developing renal involvement (P=0.0018). and serum TNF-$\alpha$ levels in the acute stage of patients with renal involvement($11.45{\pm}7.01$ pg/ml) were significantly higher than those of without renal involvement($6.32{\pm}1.31$pg/m1) and of age-matched controls($5.99{\pm}1.34$pg/m1)(P=0.012, 0.027, respectively). However, urine TNF-$\alpha$ levels have no correlation with renal involvement. On investigation of serum TNF-$\alpha$ levels in acute stage of HS purpura, persistent purpura had a significantly higher increase(P=0.038). Conclusion: Serum concentration of TNF-$\alpha$ is a risk factor and has a predictable value along with clinical risk factors, such as, persistent purpura for renal involvement in HS purpura. Also, the effectiveness of the specific treatment fur antagonizing TNF-$\alpha$ in HS nephritis may need further study.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.236-244
• /
• 2011

Purpose: This study was aimed to compare the margin and internal fitness of 3-unit zirconia bridge cores fabricated by several CAD/CAM systems using replica technique. Materials and methods: Three unit-bridge models in which upper canine and upper second premolar were used as abutments and upper first premolar was missed, were fabricated. Fourty models were classified into 4 groups (Cerasys$^{(R)}$ (Group C), Dentaim$^{(R)}$ (Group D), KaVo Everest$^{(R)}$ (Group K), $Lava^{TM}$ (Group L)), and zirconia cores were fabricated by each company. Sixteen points were measured on each abutment by replica technique. Statistical analysis was accomplished with two way ANOVA and Dunnett T3 (${\alpha}$=.05). Results: In most systems, there was a larger gap on inter margin than outer margin. In the Group K, overall fitness was excellent, but the incisal gap was very large. In the Group C, marginal gap was significantly larger than Group K, but overall internal gap was uniform (P<.05). The axial gap was under $100\;{\mu}m$ in all system. The difference between internal and external gap was small on Group L and C. However, internal gap was significantly larger than external gap in Group D (P<.05). The fitness of canine was better than second premolar among abutments (P<.05). Conclusion: The marginal and internal gap was within the clinically allowed range in all of the three systems. There was a larger gap on second premolar than canine on internal and marginal surface. In most systems, there was a larger gap on occlusal surface than axial surface.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.3
• /
• pp.279-286
• /
• 2009

This study carried out to find out feed value of barley plus pea mixture with different ratio and cutting date to got basic information when introduced the mixture as new cropping system in middle part of Korean peninsular. Dry matter (DM) yield increased as barley seeding rate was higher and showed the highest yield in the plots with barley 85% plus 15% ratio when harvested on May 16. There was no different in crude protein, available protein and digestible protein cutting on April 25 in every mixture, but the content increased with higher pea mixture rate after May 2. The content of acid detergent fiber (ADF) and neutral detergent fiber (NDF) increase coincided with higher barley rate and late cutting dates. But relative feed value (RFV) resulted in opposite trend. Higher pea ratio influenced increased content of total digestible nuterients (TDN), but decreased before May 9 cutting and increased after the next cutting regime. There was no statistical difference in P and Mg between sowing rate, but Ca increased at higher pea ratio and P, Ca, K decreased in all plots as harvests were delayed. The content of estimated net energy (ENE), net energy maintenance (NEM) and net energy gain (NEG) significantly increased with higher pea rate and earlier cutting. But net energy lactation (NEL) was no significant differences between seeding rates and cutting dates. In conclusion, mineral yield such as P, Ca, K and Mg showed the highest yield at barley plus pea ratio of 75 : 25 and energy yield of ENE, NEL, NEM, NEG and TDN was the highest at 85 to 15 mixture plots and DM yield, TDN yield, mineral yield such as P, Ca, K and Mg and energy yield of ENE, NEL, NEM, NEG were the highest on each treatment cutting on May 16.

• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.261-277
• /
• 2017

This study defines influencing sections as the part of the road section where passing vehicles are traveling with the lower speed compared to speed limit due to speed humps. The influencing section was divided into 3 parts; influencing section before the speed hump, interval section, and influencing section after the speed hump. This analysis focused on the changes of each part depending on installation types, vehicle types, and daytime or nighttime. For the interval section, especially, the ratio of distance traveled with lower speed than speed limit to interval section is defined as effective influencing section ratio to be analyzed. Vehicle speed profiles were collected with a speed gun to extract influencing section lengths. The survival analysis was applied and estimated survival functions are compared with each other by several statistical tests. As a consequence, the average length of influencing section on the 50m sequential speed humps was 75.3% longer during the deceleration than that of isolated speed hump, and 18.9% during the acceleration. The effective influencing section ratio for the 30m and 50m sequential speed humps had a small difference of 81.0% and 76.0% while the absolute values of the section that passing speed were less than the speed limit were longer on 50m sequential speed humps, each being 24.3m and 38.0m. Using the log rank test, it was evident that sequential speed humps were more effective to increase the length of influencing sections compared to the isolated speed hump. Vehicle type was the strong factor for influencing section length on the isolated speed hump, but daytime or nighttime was not the effective one. This research result can be used for improving the efficiency selecting the installation point of speed humps for road safety and estimating the standard of the distance between sequential speed humps.

• Korean Journal of Cognitive Science
• /
• v.20 no.2
• /
• pp.125-154
• /
• 2009

This paper describes the possibility of human physiological data, especially brain-wave activity, to detect cognitive overload, a phenomenon that may occur while learner uses an e-learning system. If it is found that cognitive overload to be detectable, providing appropriate feedback to learners may be possible. To illustrate the possibility, while engaging in cognitive activities, cognitive load levels were measured by EEG (electroencephalogram) to seek detection of cognitive overload. The task given to learner was a computerized listening and recall test designed to measure working memory capacity, and the test had four progressively increasing degrees of difficulty. Eight male, right-handed, university students were asked to answer 4 sets of tests and each test took from 61 seconds to 198 seconds. A correction ratio was then calculated and EEG results analyzed. The correction ratio of listening and recall tests were 84.5%, 90.6%, 62.5% and 56.3% respectively, and the degree of difficulty had statistical significance. The data highlighted learner cognitive overload on test level of 3 and 4, the higher level tests. Second, the SEF-95% value was greater on test3 and 4 than on tests 1 and 2 indicating that tests 3 and 4 imposed greater cognitive load on participants. Third, the relative power of EEG gamma wave rapidly increased on the 3rd and $4^{th}$ test, and signals from channel F3, F4, C4, F7, and F8 showed statistically significance. These five channels are surrounding the brain's Broca area, and from a brain mapping analysis it was found that F8, right-half of the brain area, was activated relative to the degree of difficulty. Lastly, cross relation analysis showed greater increasing in synchronization at test3 and $4^{th}$ at test1 and 2. From these findings, it is possible to measure brain cognitive load level and cognitive over load via brain activity, which may provide atimely feedback scheme for e-learning systems.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.115-127
• /
• 2018

This study aims to propose management strategies of ventilation paths for improving urban thermal environments. For this purpose, Gimhae-si in Gyeongsangnamdo was selected as a study area. We analyzed hot spots and cool spots in Gimhae by using Landsat 8 satellite image data and spatial statistical analysis, and finally derived the vulnerable areas to thermal environment. In addition, the characteristics of ventilation paths including wind direction and wind speed were analyzed by using data of the wind resource map provided by Korea Meteorological Administration. As a result, it was found that a lot of hot spots were similar to those with weak wind such as Jinyoung-eup, Jillye-myeon, Juchon-myeon and the downtown area. Based on the analysis, management strategies of ventilation paths in Gimhye were presented as follows. Jinyoung-eup and Jillye-myeon with hot spot areas and week wind areas have a strong possibility that hot spot areas will be extended and strengthened, because industrial areas are being built. Hence, climate-friendly urban and architectural plans considering ventilation paths is required in these areas. In Juchon-myeon, where industrial complexes and agricultural complexes are located, climate-friendly plans are also required because high-rise apartment complexes and an urban development zone are planned, which may induce worse thermal environment in the future. It is expected that a planning of securing and enlarging ventilation paths will be established for climate-friendly urban management. and further the results will be utilized in urban renewal and environmental planning as well as urban basic plans. In addition, we expect that the results can be applied as basic data for climate change adaptation plan and the evaluation system for climate-friendly urban development of Gimhye.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.130-137
• /
• 2007

This in vitro study examined the effect of surface defects on cutting blades on the extent of the cyclic fatigue fracture of HEROShaper Ni-Ti rotary files using fractographic analysis of the fractured surfaces. A total of 45 HEROShaper (MicroMega) Ni-Ti rotary flies with a #30/.04 taper were divided into three groups of 15 each. Group 1 contained new HEROShapers without any surface defects. Group 2 contained HEROShapers with manufacturing defects such as metal rollover and machining marks. Croup 3 contained HEROShapers that had been clinically used for the canal preparation of 4-6 molars A fatigue-testing device was designed to allow cyclic tension and compressive stress on the tip of the instrument whilst maintaining similar conditions to those experienced in a clinic. The level of fatigue fracture time was measured using a computer connected the system. Statistical analysis was performed using a Tukey's test. Scanning electron microscopy (SEM) was used for fractographic analysis of the fractured surfaces. The fatigue fracture time between groups 1 and 2, and between groups 1 and 3 was significantly different (p<0.05) but there was no significant difference between groups 2 and 3 (p>0.05). A low magnification SEM views show brittle fracture as the main initial failure mode At higher magnification, the brittle fracture region showed clusters of fatigue striations and a large number of secondary cracks. These fractures typically led to a central region of catastrophic ductile failure. Qualitatively, the ductile fracture region was characterized by the formation of microvoids and dimpling. The fractured surfaces of the HEROShapers in groups 2 and 3 were always associated with pre-existing surface defects. Typically, the fractured surface in the brittle fracture region showed evidence of cleavage (transgranular) facets across the grains, as well as intergranular facets along the grain boundaries. These results show that surface defects on cutting blades of Ni-Ti rotary files might be the preferred sites for the origin of fatigue fracture under experimental conditions. Furthermore this work demonstrates the utility of fractography in evaluating the failure of Ni-Ti rotary flies.

• Management & Information Systems Review
• /
• v.38 no.4
• /
• pp.61-78
• /
• 2019

When calculating gains from transfers of assets inherited or donated, the value recognized at the market price as of the date of inheritance or acquisition is recognized as the actual transaction value at the time of acquisition. However, Precedents for the appeal for review by the NTS, the request for adjudgment by the Tax Tribunal(TT) and the request of examination by the Board of Audit and Inspection of Korea(BAI) and the cases of the lawsuit have not shown a consistent results on how much such a the actual transaction value will be measured. This study investigates the operating state of the current tax appeal system using the statistical data of the TT, NTS, and BAI and cases of the lawsuit from 2008 to 2017, and suggests the Improvement of Capital Gains Tax Act on the transfer of inherited and donated property. As a result, total number of requested cases has diminished because cases of the pre-assessment review and the reconsideration appeal by the NTS have decreased steadily over the past decade, while the cases of the lawsuit and the administrative trials(the request for adjudgment by the TT, the appeal for review by the NTS, and the request of examination by the BAI) have been steadily increasing. Also This study found that more than 40% of the complainants proceeded with the cases of the lawsuit proceedings in disagreement with the disposition of tax dissatisfaction under the administrative trials. In addition, Even though the retrospective appraisal price is not recognized as the market price due to the strict interpretation of the tax regulations, it can be seen that it is interpreted as a more expanded concept in the application of the market price than the government office or the tax judge. Therefore, according to the precedents of the cases lawsuit, it is necessary to establish a regulation on the recognition of retroactive appraisal value.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.145-153
• /
• 2009

The purpose of this study was to evaluate the effect of instrument compliance on the polymerization shrinkage stress measurements of dental composites. The contraction strain and stress of composites during light curing were measured by a custom made stress-strain analyzer, which consisted of a displacement sensor, a cantilever load cell and a negative feedback mechanism. The instrument can measure the polymerization stress by two modes: with compliance mode in which the instrument compliance is allowed, or without compliance mode in which the instrument compliance is not allowed. A flowable (Filtek Flow: FF) and two universal hybrid (Z100: Z1 and Z250: Z2) composites were studied. A silane treated metal rod with a diameter of 3.0 mm was fixed at free end of the load cell, and other metal rod was fixed on the base plate. Composite of 1.0 mm thickness was placed between the two rods and light cured. The axial shrinkage strain and stress of the composite were recorded for 10 minutes during polymerization. and the tensile modulus of the materials was also determined with the instrument. The statistical analysis was conducted by ANOVA. paired t-test and Tukey's test (${\alpha}<0.05$). There were significant differences between the two measurement modes and among materials. With compliance mode, the contraction stress of FF was the highest: 3.11 (0.13). followed by Z1: 2.91 (0.10) and Z2: 1.94 (0.09) MPa. When the instrument compliance is not allowed, the contraction stress of Z1 was the highest: 17.08 (0.89), followed by FF: 10.11 (0.29) and Z2: 9.46 (1.63) MPa. The tensile modulus for Z1, Z2 and FF was 2.31 (0.18), 2.05 (0.20), 1.41 (0.11) GPa, respectively. With compliance mode. the measured stress correlated with the axial shrinkage strain of composite: while without compliance the elastic modulus of materials played a significant role in the stress measurement.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.226-231
• /
• 2011

Ulmus davidiana var. japonica is a deciduous tree species used for traditional medicine. This study was conducted to investigate the variation of samara, seed, germination and growth characteristics among populations and among individuals within five natural populations of U. davidiana var. japonica distributed in Korea. The ten characteristics of samara and seed, the three germination behaviors as well as the two growth traits were studied in samaras collected from total 32 trees. Statistical analysis of all characteristics showed that there were significant differences among populations as well as among individuals within populations. In this study, the mean characteristics of this species were 13.0 mm in samara length, 9.7 mm in samara width, 1.37 in samara index, 0.015 g in samara weight, 3.07 mm in samara stalk length, 3.85 seed length, 2.66 mm in seed width, 1.46 in seed index, 1.29 mm seed thickness, 0.0062 g in seed weigh, 34.8% in germination percentage, 8.6 days in mean germination time, 3.5 ea./day in gemination rate, 37.7 cm in height and 4.90 mm in root collar diameter. Especially, coefficients of variations in samara weight, germination percentage, germination rate, height and root collar diameter were relatively high (${\geq}30.0%$) compared to other traits. There was no significant relationship between population association and geographical distribution. The results of principal component analysis for 15 characteristics showed that primary four principal components (PC's) explained 100% of the total variation. The first PC accounted for 41.8% of the variability which correlated with morphological traits, the second PC accounted for 32.9% of the variability which correlated with germination behaviors and the third PC accounted for 16.3% of the variability which correlated with growth traits.