• 멤브레인
• /
• 제8권3호
• /
• pp.138-147
• /
• 1998

접촉분해 경유에 함유된 유용 방향족 성분(나프탈렌류 성분:탄소수 10-12)의 분리법으로서 추출법과 액막법을 분리성능 면에서 비교했다. 추출법의 용매로서는 dimethylsulfoxide수용액을, 액막법의 막상으로서는 dimethylsulfoxide와 saponin의 혼합수용액을 각각 사용했다. 추출법에서 얻어진 노르말-노난을 기준 성분으로한 나프탈렌류 성분의 선택도는 온도가 낮아짐에 따라 급격히 증가했으나, 액막법에서 얻어진 선택도는 온도에 무관한 경향을 나타내어, 실온에서의 추출법에 의한 나프탈렌류 성분의 선택도는 액막법에서 얻어진 선택도는 온도에 무관한 경향을 나타내어, 실온에서의 추출법에 의한 나프탈렌류 성분의 선택도는 액막법에 비해 컸다. 또, 회분 교반조를 사용하여 두 분리법으로 부터 나프탈렌류 성분의 물질이동속도를 측정한 결과, 추출법의 연속상측 물질이동계수는 액막법의 막상측 투과계수에 비해 약 280배 컸다.

• 한국식품과학회지
• /
• 제22권5호
• /
• pp.543-548
• /
• 1990

살구의 휘발성 향기성분 조성에 대한 분리 방법의 영향을 조사코저 살구 과육(pH 3.1)을 simultaneous distillation-extraction(SDE)법, headspace trapping법 또는 이를 pH 7.0으로 중화시킨 후 SDE법에 의해 얻어진 정유성분의 조성을 분석 비교하였다. GC-MS 및 GC에 의한 표준품과 머무름 시간의 비교에 의해 확인된 80종의 성분들 중 pH3.1에서 SDE법에 의해 얻어진 정유성분중에는 다른 두 가지 방법에 의해 얻어진 정유성분에서는 검출되지 않거나 또는 미량으로 검출된 n-hexanal, trans-2-hexenal, cis-3-hexen-1-ol, linalool oxide, linalool, ${\alpha}-terpineol$, nerol, geraniol, benzyl alcohol, ${\beta}-phenylethyl alcohol$ 및 naphthalene 유도체들이 많이 검출되었으며 이러한 결과는 살구에서 비휘발성인 glycoside 형태로 존재하는 위와 같은 성분들이 산성조건하에서 수증기 증류시 glycoside 결합이 가수분해되어 휘발성 성분으로 유리되는데 기인하는 것으로 판단되었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권4호
• /
• pp.67-76
• /
• 2020

Polycyclic aromatic hydrocarbons (PAHs) are organic compounds that tend to persist in environmental media for a long period of time. This work presents a 2-year monitoring study of occurrence of three PAHs (benzo(a)pyrene, naphthalene, and fluoranthene) in groundwater. The groundwater samples were collected from 106 sites of nation's groundwater quality monitoring network and analyzed by simultaneous analysis method to quantify the concentrations of the PAHs. Benzo(a)pyrene was not detected in all samples. Naphthalene and fluoranthene concentrations ranged from not detected to 12.8 ng/L and not detected to 10.5 ng/L with their detection frequency being 57.8 and 4.2%, respectively. The concentrations of PAHs in ground- and drinking waters are not currently regulated in Korea, but the concentration levels of naphthalene and fluoranthene found in this work were lower than the regulatory limits of other countries (naphthalene 0.001~0.07 mg/L, fluoranthene 0.001~1.4 mg/L). The monitoring result of this study revealed that PAHs exist as trace amounts in domestic groundwater, however continuos monitoring is necessary to protect groundwater from PAHs contamination with growing industrialization and urbanization.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.57-67
• /
• 2022

The curing characteristics of naphthalene type epoxy resin systems according to the change of curing agent were investigated to develop a new next-generation EMC(Epoxy Molding Compound) with excellent warpage characteristics, low thermal expansion, and excellent fluidity for WLP(Wafer Level Package). As epoxy resins, DGEBA, which are representative bisphenol type epoxy resins, NE-16, which are the base resins of naphthalene type epoxy resins, and NET-OH, NET-MA, and NET-Epoxy resins newly synthesized based on NE-16 were used. As a curing agent, DDM (Diamino Diphenyl Methane) and CBN resin with naphthalene moiety were used. The curing reaction characteristics of these epoxy resin systems with curing agents were analyzed through thermal analysis experiments. In terms of curing reaction mechanism, DGEBA and NET-OH resin systems follow the nth curing reaction mechanism, and NE-16, NET-MA and NET-Epoxy resin systems follow the autocatalytic curing reaction mechanism in the case of epoxy resin systems using DDM as curing agent. On the other hand, it was found that all of them showed the nth curing reaction mechanism in the case of epoxy resin systems using CBN as the curing agent. Comparing the curing reaction rate, the epoxy resin systems using CBN as the curing agent showed a faster curing reaction rate than them with DDM as a hardener in the case of DGEBA and NET-OH epoxy resin systems following the same nth curing reaction mechanism, and the epoxy resin systems with a different curing mechanism using CBN as a curing agent showed a faster curing reaction rate than DDM hardener systems except for the NE-16 epoxy resin system. These reasons were comparatively explained using the reaction rate parameters obtained through thermal analysis experiments. Based on these results, low thermal expansion, warpage reduction, and curing reaction rate in the epoxy resin systems can be improved by using CBN curing agent with a naphthalene moiety.

• Journal of Microbiology
• /
• 제44권5호
• /
• pp.473-479
• /
• 2006

A well characterized naphthalene-degrading strain, Pseudomonas putida PpG7 was observed to utilize limonin, a highly-oxygenated triterpenoid compound as a sole source of carbon and energy. Limonin concentrations evidenced a 64% reduction over 48 h of growth in batch cultures. Attempts were made to acquire a plasmid-less derivative via various methods (viz. Ethidium Bromide, SDS, elevated temperature & mitomycin C), among which the method involving mitomycin C ($20{\mu}g/ml$) proved successful. Concomitant with the loss of plasmid in P. putida PpG7 strain, the cured derivative was identified as a $lim^-$ phenotype. The $lim^+$ phenotype could be conjugally transferred to the cured derivative. Based on the results of curing with mitomycin C, conjugation studies and presence of ndo gene encoding naphthalene 1,2 dioxygenase, it was demonstrated that genes for the limonin utilization were encoded on an 83 kb indigenous transmissible Inc. P9 NAH plasmid in Pseudomonas putida PpG7 strain.

• 대한기계학회논문집B
• /
• 제26권8호
• /
• pp.1077-1087
• /
• 2002

The heat (mass) transfer characteristics on the blade surface of a high-turning first-stage turbine rotor for power generation has been investigated by employing the naphthalene sublimation technique. A four-axis profile measurement system is developed successfully for the measurements of local sublimation depth on the curved surface In the leading edge region, there is a good agreement between the present heat (mass) transfer data and the previous result on a turbine blade with a moderate turning angle, but some discrepancies are found in the mid-chord heat (mass) transfer between the two results. The local heat (mass) transfer on the present suction surface is greatly enhanced due to an earlier boundary transition, compared with that on a turbine blade with a moderate turning angle, meanwhile there is only a slight change in the pressure-side heat (mass) transfer between the two different turbine rotors. In general, the heat (mass) transfer augmentation by the endwall vortices is found much higher on the suction surface than on the pressure surface.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권1호
• /
• pp.29-38
• /
• 2010

Batch tests were carried out to examine the influence of the presence of soil and Fe(II) sorption capacity of soil on the ferrous catalyzed sodium persulfate oxidation for the destruction of organic pollutants in the application of in-situ chemical oxidation. Laboratory column tests were also conducted to investigate the transport of oxidant and catalyst in contaminated groundwater. Test results proved that Fe(II) was adsorbed on soil surface, and thus soil behaved as a heterogeneous catalyst, enhancing the naphthalene removal rate up to 50%. Column tests that were conducted with and without dissolved Fe(II) showed that naphthalene removal ratio were 24% and 25%, respectively. The removal efficiency was not enhanced with dissolved Fe(II), since the dissolved Fe(II) flew out of the column as the oxidant progressively injected into the column saturated with Fe(II). It indicates that the injected oxidant could not interact with dissolved Fe(II). But target organic pollutant was degraded in soil column system, implying that sulfate radical was produced by the reaction of dissolved persulfate with Fe(II) adsorbed on soil.

• Journal of Microbiology and Biotechnology
• /
• 제19권7호
• /
• pp.651-657
• /
• 2009

Shifts in the activity and diversity of microbes involved in aliphatic and aromatic hydrocarbon degradation in contaminated soil were investigated. Subsurface soil was collected from a gas station that had been abandoned since 1995 owing to ground subsidence. The total petroleum hydrocarbon content of the sample was approximately 2,100 mg/kg, and that of the soil below a gas pump was over 23,000 mg/kg. Enrichment cultures were grown in mineral medium that contained hexadecane (H) or naphthalene (N) at a concentration of 200 mg/l. In the Henrichment culture, a real-time PCR assay revealed that the 16S rRNA gene copy number increased from $1.2{\times}10^5$to $8.6{\times}10^6$with no lag phase, representing an approximately 70-fold increase. In the N-enrichment culture, the 16S rRNA copy number increased about 13-fold after 48 h, from $6.3{\times}10^4$to $8.3{\times}10^5$. Microbial communities in the enrichment cultures were studied by denaturing gradient gel electrophoresis and by analysis of 16S rRNA gene libraries. Before the addition of hydrocarbons, the gas station soil contained primarily Alpha- and Gammaproteobacteria. During growth in the H-enrichment culture, the contribution of Bacteriodetes to the microbial community increased significantly. On the other hand, during N-enrichment, the Betaproteobacteria population increased conspicuously. These results suggest that specific phylotypes of bacteria were associated with the degradation of each hydrocarbon.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2285-2289
• /
• 2014

The solvolysis rate constants of 5-dimethylamino-naphthalene-1-sulfonyl chloride ($(CH_3)_2NC_{10}H_6SO_2Cl$, 1) in 31 different solvents are well correlated with the extended Grunwald-Winstein equation, using the $N_T$ solvent nucleophilicity scale and $Y_{Cl}$ solvent ionizing scale with sensitivity values of $0.96{\pm}0.09$ and $0.53{\pm}0.03$ for l and m, respectively; the correlation coefficient value was 0.955. These l and m values can be considered to support an $S_N2$ reaction pathway having a transition state (TS) structure similar to that of the benzenesulfonyl chloride reaction. This interpretation is further supported by the activation parameters, i.e., relatively small positive ${\Delta}H^{\neq}$ (12.0 to $15.9kcal{\cdot}mol^{-1}$) and large negative ${\Delta}S^{\neq}$ (-23.1 to $-36.3cal{\cdot}mol^{-1}{\cdot}K^{-1}$) values, and the solvent kinetic isotope effects (SKIEs, 1.34 to 1.88). Also, the selectivity values (S = 1.2 to 2.9) obtained in binary solvents are consistent with the proposed mechanism.

• 동굴
• /
• 제71호
• /
• pp.1-4
• /
• 2006

Chloromethylnaphthalene is a valuable compound for obtaining of the plant growing stimulator - -napthylacetic acid. Chloromethylation of naphthalene by paraformaldehyde in the presence of glacial acetic acid, phosphoric and hydrochloric acids at temperature 80 - 85C and duration - 6 hours the -chloromethylnaphthalene yield was 55-57%. Using Box-Wilson method for mathematical planning of experiment carried out optimization of its synthesis for purpose increasing -chloromethylnaphthalene yield. Preliminary, one - factor experiments were carried out for selecting independence main parameters influencing on the synthesis. A full factor experiment of 23 with extended matrix of planning was used for optimization. Aiming to increase the -chloromethylnaphthalene yield, the obtained mathematical model was used for program of sharp raising on the reply surface. The received optimal conditions for the -chloromethylnaphthalene synthesis were selected as following: molar ratio of naphthalene parapfsormaldehyde of 1 : 2 temperature - 105C duration of the reaction - 3 hours. The yield of -chloromethylnaphthalene under these optimal conditions was 75%.