• Korean Journal of Materials Research
• /
• v.21 no.2
• /
• pp.111-114
• /
• 2011

As a growth-template of ZnO nanorods (NR), a hexagonal $\beta-Ni(OH)_2$ nanosheet (NS) was synthesized with the low temperature hydrothermal process and its microstructure was investigated using a high resolution scanning electron microscope and transmission electron microscope. Zinc nitrate hexahydrate was hydrolyzed by hexamethylenetetramine with the same mole ratio and various temperatures, growth times and total concentrations. The optimum hydrothermal processing condition for the best crystallinity of hexagonal $\beta-Ni(OH)_2$ NS was determined to be with 3.5 mM at $95^{\circ}C$ for 2 h. The prepared $Ni(OH)_2$ NSs were two dimensionally arrayed on a substrate using an air-water interface tapping method, and the quality of the array was evaluated using an X-ray diffractometer. Because of the similarity of the lattice parameter of the (0001) plane between ZnO (wurzite a = 0.325 nm, c = 0.521 nm) and hexagonal $\beta-Ni(OH)_2$ (brucite a = 0.313 nm, c = 0.461 nm) on the synthesized hexagonal $\beta-Ni(OH)_2$ NS, ZnO NRs were successfully grown without seeds. At 35 mM of divalent Zn ion, the entire hexagonal $\beta-Ni(OH)_2$ NSs were covered with ZnO NRs, and this result implies the possibility that ZnO NR can be grown epitaxially on hexagonal $\beta-Ni(OH)_2$ NS by a soluble process. After the thermal annealing process, $\beta-Ni(OH)_2$ changed into NiO, which has the property of a p-type semiconductor, and then ZnO and NiO formed a p-n junction for a large area light emitting diode.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.502-507
• /
• 2016

Vanadium dioxide, $VO_2$, is a thermochromic material that exhibits a reversible metal-insulator phase transition at $68^{\circ}C$, which accompanies rapid changes in the optical and electronic properties. To decrease the transition temperature around room temperature, a number of studies have been performed. The phase transition temperature of 1D nanowire $VO_2$ with a 100 nm diameter was reported to be approximately $29^{\circ}C$. In this study, 1D or 2D nanostructured $VO_2$ was grown using the vapor transport method. Vanadium dioxide has a different morphology with the same growth conditions for different substrates. The 1D nanowires $VO_2$ were grown on a Si substrate ($Si{\setminus}SiO_2$(300 nm), whereas the 2D & 3D nanostructured $VO_2$ were grown on an exfoliated graphene nanosheet. The crystallographic properties of the 1D or 2D & 3D nanostructured $VO_2$, which were grown by thermal CVD, and exfoliated-transferred graphene nanosheets on a Si wafer which was used as substrate for the vanadium oxide nanostructures, were analyzed by Raman spectroscopy. The as-grown vanadium oxide nanostructures have a $VO_2$ phase, which are confirmed by Raman spectroscopy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.399-399
• /
• 2012

최근 그래핀 연구와 더불어 2차원 구조의 나노소재에 대한 관심이 급증하면서 육각형의 질화붕소(hexagonal boron nitride; h-BN) 나노시트(nanosheet)[1]나 붕소 탄화질화물(boron caronitride;BCN) 나노시트[2, 3]와 같은 2차원 구조체에 대한 연구가 활발히 진행되고 있다. 그 중 BCN은 반금속(semimetal)인 흑연(graphite)과 절연체인 h-BN이 결합된 나노시트로 원소의 구성 비율에 따라 전기적 특성을 제어할 수 있다는 장점이 있다. 따라서 다양한 나노소자로의 응용을 위한 연구가 활발히 진행되고 있다. 본 연구에서는 열 화학기상증착법(thermal chemical vapor deposition)을 이용하여 폴리스틸렌(polystyrene)과 보레인 암모니아(borane ammonia)를 사용하여 BCN 나노시트를 합성하였다. 합성된 BCN 나노시트의 구조적 특징과 화학적 조성 및 결합 상태를 주사전자현미경(scanning electron microscopy), 투과전자현미경(transmission electron microscopy), X-선 광전자 분광법(X-ray photoelectron spectroscopy), 라만 분광법(Raman spectroscopy)을 통해 조사하였고, 이온성 용액법 (ionic liquid)[4]을 이용하여 전계효과 특성을 측정하였다.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2041-2043
• /
• 2013

A layered perovskite of Dion-Jacobson phase, $RbLaTa_2O_7$, was successfully exfoliated into colloidal suspension via successive ion-exchange and intercalation reaction. The pristine perovskite $RbLaTa_2O_7$ was synthesized by conventional solid-state reaction, and then, it was ion-exchanged with hydrochloric acid to obtain a protonic form of perovskite. The resulting proton-exchanged perovskite was reacted with ethylamine to increase interlayer spaces for further intercalation reaction. Finally, the ethylamine-intercalated form was exfoliated into nanosheets via an intercalation of bulky organic cations (tetrabutylammonium). According to X-ray diffraction (XRD) analysis, the TBA-intercalated form showed remarkably increased interlayer spacing (${\Delta}d$ = 1.67 nm) in comparison with that of the pristine material. Transmission electron microscopic image of exfoliated perovskite clearly revealed that the present exfoliated perovskite were composed of very thin layers. This exfoliated perovskite nanosheets could be applicable as building blocks for fabricating functional nanocomposites.

• Carbon letters
• /
• v.19
• /
• pp.66-71
• /
• 2016

The development of nanostructured functional materials derived from biomass and/or waste is of growing importance for creating sustainable energy-storage systems. In this study, nanoporous carbonaceous materials containing numerous heteroatoms were fabricated from waste coffee grounds using a top-down process via simple heating with KOH. The nanoporous carbon nanosheets exhibited notable material properties such as high specific surface area (1960.1 m² g⁻¹), numerous redox-active heteroatoms (16.1 at% oxygen, 2.7 at% nitrogen, and 1.6 at% sulfur), and high aspect ratios (>100). These unique properties led to good electrochemical performance as supercapacitor electrodes. A specific capacitance of ~438.5 F g⁻¹ was achieved at a scan rate of 2 mV s⁻¹, and a capacitance of 176 F g⁻¹ was maintained at a fast scan rate of 100 mV s⁻¹. Furthermore, cyclic stability was achieved for over 2000 cycles.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.3
• /
• pp.193-199
• /
• 2013

In this work, thin film type Cu/ZnO nanostructure catalysts were fabricated by several synthetic routes in order to maximize the performance of the micro reforming system. For this work, various Cu/ZnO nanostructure catalysts could be synthesized by means of four approaches which are chemical vapor method, wet solution method and their hybrid method. The reforming performance of these as-synthetic catalysts was evaluated as compared to the conventional catalysts. Among the as-synthetic nanostructures, sphere type catalysts with specific surface of $18.6m^2/g$ showed the best performance of hydrogen production rate of 30ml/min at the feed rate of 0.2ml/min. This work will give the first insight on thin film type Cu/ZnO nanostructure catalyst for micro reforming system for hydrogen production of portable electronic systems.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.617-617
• /
• 2013

최근 그래핀 연구와 더불어 2차원 구조의 나노소재에 대한 관심이 급증하면서 육각형의 질화붕소(hexagonal boron nitride; h-BN) 박막(nanosheet) [1]이나 붕소 탄화질화물(boron caronitride; BCN) 박막 [2,3]과 같은 2차원 구조체에 대한 연구가 활발히 진행되고 있다. 그 중 BCN은 반금속(semimetal)인 흑연(graphite)과 절연체인 h-BN이 결합된 박막으로 원소의 구성 비율에 따라 전기적 특성을 제어할 수 있다는 장점이 있다. 따라서 다양한 나노소자로의 응용을 위한 연구가 활발히 진행되고 있다. 본 연구에서는 폴리스틸렌(polystyrene, PS)과 보레인 암모니아(borane ammonia)를 고체 소스로 이용하여 열화학기상증착법으로 BCN 박막을 SiO2 기판 위에 직접 합성하였다. SEM과 AFM 관측을 통해 합성된 BCN 박막의 두께가 약 10 nm이며, RMS roughness가 0.5~2.6 nm로 매우 낮은 것을 확인하였다. 합성과정에서 PS의 양을 조절하여 BCN 박막의 탄소의 밀도를 성공적으로 제어하였으며, 이에 따라 전기적인 특성이 제어되는 양상을 확인하였다. 또한 합성온도 변화에 따른 BCN 박막의 전기적인 특성이 제어되는 양상을 확인하였다. 추가적으로 같은 방법을 이용하여 BCN 박막을 Cu 위에서 합성하여 SiO2 기판위에 전사하였다. 합성된 BCN 박막의 구조적 특징과 화학적 조성 및 결합 상태를 투과전자현미경(transmission electron microscopy), X-선 광전자 분광법(X-ray photoelectron spectroscopy), 라만 분광법(Raman spectroscopy)을 통해 조사하였고, 이온성 용액법(ionic liquid) [4]을 이용하여 전계효과 특성을 측정하였다.

• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.272-278
• /
• 2017

Two-dimensional (2D) materials, especially graphene and $MoS_2$ sheets, have gained much attention and shown great promise for the application in supercapacitors. To widely use the 2D materials for supercapacitors, highly efficient, low cost, and environmentally friendly synthetic methods for the preparation of 2D materials should be developed. Here, we will review recently developed solution-based processes for preparing 2D materials for supercapacitors. Chemical exfoliation-reduction, chemical intercalation, and liquid phase exfoliation methods will be introduced. Moreover, the electrochemical characteristics of graphene and $MoS_2$-based electrodes for supercapacitors are summarized. In addition to solution-based processes, other challenges and opportunities are discussed in terms of controlling nanosheet compositions, sizes, and thicknesses.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.255-255
• /
• 2013

최근 그래핀 연구와 더불어 2차원 구조의 나노소재에 대한 관심이 급증하면서 육각형의 질화붕소(hexagonal boron nitride; h-BN) 박막(nanosheet)이나 붕소 탄화질화물(boron caronitride; BCN) 박막과 같은 2차원 구조체에 대한 연구가 활발히 진행되고 있다. 그 중 BCN은 반금속(semimetal)인 흑연(graphite)과 절연체인 h-BN이 결합된 박막으로 원소의 구성 비율에 따라 전기적 특성을 제어할 수 있다는 장점이 있다. 따라서 다양한 나노소자로의 응용을 위한 연구가 활발히 진행되고 있다. 본 연구에서는 폴리스틸렌(polystyrene, PS)과 보레인 암모니아(borane ammonia)를 고체 소스로 이용하여 열화학 기상증착법을 이용하여 BCN 박막를 SiO2 기판 위에 직접 합성하였다. SEM과 AFM 관측을 통해 합성된 BCN 박막을 확인하였으며, RMS roughness가 0.5~2.6 nm로 매우 낮은 것을 확인하였다. 합성과정에서 PS의 양을 조절하여 BCN 박막의 탄소의 밀도를 성공적으로 제어하였으며, 이에 따라 전기적인 특성이 제어되는 양상을 확인하였다. 또한 합성온도 변화에 따른 BCN 박막의 전기적인 특성이 제어되는 양상을 확인하였다. 추가적으로 같은 방법을 이용하여 BCN 박막을 Ni 위에서 합성하여 SiO2 기판위에 전사 하였다. 합성된 BCN 박막의 구조적 특징과 화학적 조성 및 결합 상태를 투과전자현미경(transmission electron microscopy), X-선 광전자 분광법(X-ray photoelectron spectroscopy)을 통해 조사하였다.

• Korean Journal of Materials Research
• /
• v.28 no.11
• /
• pp.627-632
• /
• 2018

Two dimensional(2D) crystals, composed of a single layer or a few atomic layers extracted from layered materials are attracting researchers' interest due to promising applications in the nanoelectromechanical systems. Worldwide researchers are preparing devices with suspended 2D materials to study their physical and electrical properties. However, during the fabrication process of 2D flakes on a target substrate, contamination occurs, which makes the measurement data less reliable. We propose a dry transfer method using poly-methyl methacrylate(PMMA) for the 2D flakes to transfer onto the targeted substrate. The PMMA is then removed from the device by an N-Methyl-2-pyrrolidone solution and a critical point dryer, which makes the suspended 2D flakes residue free. Our method provides a clean, reliable and controllable way of fabricating micrometer-sized suspended 2D nanosheets.