• 한국재료학회지
• /
• 제21권7호
• /
• pp.396-402
• /
• 2011

In this study, by using tin chloride solution as a raw material, a nano-sized tin oxide powder with an average particle size below 50 nm is generated by a spray pyrolysis process. The properties of the generated tin oxide powder depending on the inflow speed of the raw material solution are examined. When the inflow speed of the raw material solution is 2 ml/min, the majority of generated particles appear in the shape of independent polygons with average size above 80-100 nm, while droplet-shaped particles show an average size of approximately 30 nm. When the inflow speed is increased to 5 ml/min, the ratio of independent particles decreases, and the average particle size is approximately 80-100 nm. When the inflow speed is increased to 20 ml/min, the ratio of droplet-shaped particles increases, whereas the ratio of independent particles with average size of 80-100 nm decreases. When the inflow speed is increased to 100 ml/min, the average size of the generated particles is around 30-40 nm, and most of them maintain a droplet shape. With a rise of inflow speed from 2 ml/min to 5 ml/min, a slight increase of the XRD peak intensity and a minor decrease of specific surface area are observed. When the inflow speed is increased to 20 ml/min, the XRD peak intensity falls dramatically, although a significant rise of specific surface area is observed. When the inflow speed is increased to 100 ml/min, the XRD peak intensity further decreases, while the specific surface area increases.

• 한국재료학회지
• /
• 제23권2호
• /
• pp.81-88
• /
• 2013

In this study, using a tin chloride solution as the raw material, a nano-sized tin oxide powder with an average particle size below 50 nm is generated by a spray pyrolysis process. The properties of the tin oxide powder according to the nozzle tip size are examined. Along with an increase in the nozzle tip size from 1 mm to 5 mm, the generated particles that appear in the shape of droplets maintain an average particle size of 30 nm. When the nozzle tip size increases from 1 mm to 2 mm, the average size of the generated particles is around 80-100 nm, and the ratio of the independent particles with a compact surface structure increases significantly. When the nozzle tip size is at 3 mm, the majority of the generated particles maintain the droplet shape, the average size of the droplet-shaped particles increases remarkably compared to the cases of other nozzle tip sizes, and the particle size distribution also becomes extremely irregular. When the nozzle tip size is at 5 mm, the ratio of droplet-shaped particles decreases significantly and most of the generated particles are independent ones with incompact surface structures. Along with an increase in the nozzle tip size from 1 mm to 3 mm, the XRD peak intensity increases, whereas the specific surface area decreases greatly. When the nozzle tip size increases up to 5 mm, the XRD peak intensity decreases significantly, while the specific surface area increases remarkably.

• 자원리싸이클링
• /
• 제17권6호
• /
• pp.79-88
• /
• 2008

본 연구는 폐 주석의 리싸이클링을 통한 고기능성 주석 산화물 나노 분말의 대량제조 기술개발을 위한 전 단계 연구로서 주석 염화물 용액을 원료로 하여 분무열분해 반응에 의하여 평균입도 50nm 이하의 주석 산화물 분말을 제조하였으며 반응온도의 변화에 따른 생성 입자들의 특성 변화를 파악하였다. 열분해 반응온도가 $800^{\circ}C$로부터 $850^{\circ}C$로 증가함에 따라 형성된 입자들의 평균입도는 20 nm로부터 30 nm로 증가하였다. 또한 XRD 피크의 강도도 증가하였으며 비표면적은 1/2 정도로 크게 감소하였다. 반응온도 $900^{\circ}C$의 경우에는 액적 형태는 평균입도 30 nm 정도의 나노 입자들로 구성되어 있는 반면 독립된 입자들의 경우에는 평균입도가 $80{\sim}100\;nm$로 현저하게 증가 하였으며 입자 표면이 더욱 치밀화되어 있었다. 또한 XRD 피크 강도도 현저히 증가하였으며 비표면적은 현저하게 감소하였다. 반응온도 $950^{\circ}C$의 경우에는 액적 형태의 비율 및 크기가 현저히 감소하였으며 대부분의 입자들은 독립된 형태를 유지하고 있었으며 평균입도는 약 70 nm로 $900^{\circ}C$의 경우보다 오히려 감소하였다. 또한 XRD 피크의 강도도 $900^{\circ}C$의 경우에 비하여 현저히 감소하였으며 비표면적은 2배 정도 크게 증가하였다.

• 한국분말재료학회지
• /
• 제11권6호
• /
• pp.467-471
• /
• 2004

In order to fabricate a high density sintered body of ITO, nano-sized ITO powders were synthesized by coprecipitation methods. Aqueous solutions of indium and tin salts were mixed and coprecipitated by changing their pH. Coprecipitated ITO powders possessed 20-30 nm crystallite size and a relatively high BET value ($35m^2/g$), however, aggregation of particles were occurred. Therefore, a novel recrystallization technique was applied in order to eliminate the aggregates. The recrystallized ITO material consists of a little bit larger needlelike crystals, $20nm{\times}80nm$, and it possesses a higher BET value $(57m^{2}/g)$ compared to the plain coprecipitated material $(35m^{2}/g)$. Metastable phase formation and higher content of aggregated particles were observed in the coprecipitated materials. Densification was 95% to 98% complete after 5 hour sintering at $1500^{\circ}C$ for the recrystallized powders while densities of the coprecipitated powders were below 75%.

• 한국재료학회지
• /
• 제21권12호
• /
• pp.690-696
• /
• 2011

In this study, nano-sized tin oxide powder with an average particle size of below 50 nm is prepared by the spray pyrolysis process. The influence of air pressure on the properties of the generated powder is examined. Along with the rise of air pressure from $0.1kg/cm^2$ to $3kg/cm^2$, the average size of the droplet-shaped particles decreases, while the particle size distribution becomes more regular. When the air pressure increases from $0.1kg/cm^2$ to $1kg/cm^2$, the average size of the dropletshaped particles, which is around 30-50 nm, shows hardly any change. When the air pressure increases up to $3kg/cm^2$, the average size of the droplet-shaped particles decreases to 30 nm. For the independent generated particles, when the air pressure is at $0.1kg/cm^2$, the average particle size is approximately 100 nm; when the air pressure increases up to $0.5kg/m^2$, the average particle size becomes more than 100 nm, and the surface structure becomes more compact; when the air pressure increases up to $1kg/cm^2$, the surface structure is almost the same as in the case of $0.5kg/cm^2$, and the average particle size is around 80- 100 nm; when the air pressure increases up to $3kg/cm^2$, the surface structure becomes incompact compared to the cases of other air pressures, and the average particle size is around 80-100 nm. Along with the rise of air pressure from $0.1kg/cm^2$ to $0.5kg/cm^2$, the XRD peak intensity slightly decreases, and the specific surface area increases. When the air pressure increases up to $1kg/cm^2$ and $3kg/cm^2$, the XRD peak intensity increases, while the specific surface area also increases.

• 한국응용과학기술학회지
• /
• 제31권4호
• /
• pp.694-702
• /
• 2014

마이크론 크기를 가지는 ITO(indium tin oxide) 입자들은 인듐과 틴의 수용성 전구체들과 유기 첨가제를 분무 열분해하여 얻었다. 유기 첨가제로서는 에틸렌글리콜과 시트르산을 이용하였다. 분무 열분해 시 에틸렌글리콜과 시트르산과 같은 유기첨가제를 첨가하지 않고 얻어진 ITO 입자들은 구형이며 속이 꽉찬 형태를 가지는데 비해 유기 첨가제를 첨가하여 분무 열분해를 하면 얻어지는 ITO 입자들은 유기 첨가제의 양이 증가 할수록 껍질이 얇고 다공성이 증대된 중공 입자가 얻어진다. 유기첨가제를 첨가하지 않고 분무 열분해를 통해 얻어지는 마이크론 크기를 가지는 ITO는 $700^{\circ}C$에서 두 시간 동안의 후소성과 24 시간동안의 습식 볼밀링에 의해 나노 크기의 ITO로 전환되지 않으나, 유기첨가제를 첨가하고 분무 열분해를 통해 얻어지는 마이크론 크기를 가지는 ITO는 $700^{\circ}C$에서 두 시간 동안의 후소성과 24 시간 동안의 습식 볼밀링에 의해 나노 크기의 ITO로 쉽게 전환되었다. 응집된 나노 크기의 ITO의 일차 입자의 크기를 Debye-Scherrer 식에 의해 계산하였고 ITO 입자를 압축하여 만든 펠렛의 표면저항을 측정하였다.

• 자원리싸이클링
• /
• 제27권2호
• /
• pp.24-31
• /
• 2018

본 연구에서는 폐 ITO 타겟을 염산에 용해시킴으로써 인듐-주석 복합 산 용액을 제조하여 원료용액으로 사용하였다. 이 원료용액으로부터 분무열분해 공정에 의하여 평균입도 30 nm 이하의 ITO 분체를 제조하였다. 또한 본 연구에서는 인듐-주석 산화물(ITO) 형성을 위한 열역학적 수식들을 확립하였다. 반응온도가 $800^{\circ}C$로부터 $900^{\circ}C$로 증가됨에 따라 평균입도 30 nm 이하인 나노입자들이 응집되어 있는 액적 형태의 비율 및 크기는 감소하는 반면 표면 조직은 더욱 치밀해짐을 알 수 있었다. 반응온도가 $800^{\circ}C$인 경우에는 생성된 분체의 평균입도는 약 20 nm이었으며, 현저한 소결 현상은 나타나지 않았다. 한편, 반응온도가 $900^{\circ}C$인 경우에는 노즐에 의하여 미립화되는 액적의 분열 현상은 $800^{\circ}C$의 경우보다 심하게 나타났으며 액적 형태의 비율은 현저하게 감소하였다. 형성된 입자들의 평균 입도는 약 25 nm로서 $800^{\circ}C$의 경우보다 약간 증가하였다. 반응온도에 관계없이 ITO 입자들은 단결정으로 구성되어 있었다. XRD 분석 결과 분무열분해 공정에 의하여 염화물 상은 전혀 존재하지 않았으며 오직 ITO 상만이 형성되었음을 알 수 있었다. 반응온도가 $800^{\circ}C$로부터 $900^{\circ}C$로 증가함에 따라 비표면적은 약 30% 감소하였다.

• 한국분말재료학회지
• /
• 제15권6호
• /
• pp.450-457
• /
• 2008

The objectives of this study were the development of a synthesis technique for highly active nanosized ITO powder and the understanding of the reaction mechanisms of the ITO precursors. The precipitation and agglomeration phenomena in ITO and $In_{2}O_{3}$ precursors are very sensitive to reaction temperature, pH, and coexisting ion species. Excessive $Cl^-$ ion and $Sn^{+4}$ ions had a negative effect an synthesizing highly active powders. However, with a relevant stabilizing treatment the shape and size of ITO and $In_{2}O_{3}$ precursors could be controlled and high density sintered products of ITO were obtained. By applying the reprecipitation process (or stabilization technique), highly active ITO and $In_{2}O_{3}$ powders were synthesized. Sintering these powders at $1500^{\circ}C$ for 5 hours produced 97% dense ITO bodies.

• Transactions on Electrical and Electronic Materials
• /
• 제12권1호
• /
• pp.11-15
• /
• 2011

In this study, $ZnGa_2O_4$ phosphors in its application to field emission displays and electroluminescence were synthesized through the precipitation method and $Mn^{2+}$ ions. A green luminescence activator, $Cr^{3+}$ ions, and a red luminescence activator were separately doped into $ZnGa_2O_4$, which was then screen printed to an indium tin oxide substrate. The thick films of the $ZnGa_2O_4$ were deposited with the various thicknesses using nano-sized powder. The best luminescence characteristics were shown at a thickness of 60 ${\mu}m$. Additionally, green-emission $ZnGa_2O_4:Mn^{2+}$ and red-emission $ZnGa_2O_4:Cr^{3+}$ phosphor thick films, which have superior characteristics, were manufactured through the screen-printing method. These results indicate that $ZnGa_2O_4$ phosphors prepared through the precipitation method have wide application as phosphor of the full color emission.

• 한국분말재료학회지
• /
• 제21권5호
• /
• pp.377-381
• /
• 2014

This work describes the coloration, chemical stability of $SiO_2$ and $SnO_2$-coated blue $CoAl_2O_4$ pigment. The $CoAl_2O_4$, raw materials, were synthesized by a co-precipitation method and coated with silica ($SiO_2$) and tin oxide ($SnO_2$) using sol-gel method, respectively. To study phase and coloration of $CoAl_2O_4$, we prepared nano sized $CoAl_2O_4$ pigments which were coated $SiO_2$ and $SnO_2$ using tetraethylorthosilicate, $Na_2SiO_3$ and $Na_2SiO_3$ as a coating material. To determine the stability of the coated samples and their colloidal solutions under acidic and basic conditions, colloidal nanoparticle solutions with various pH values were prepared and monitored over time. Blue $CoAl_2O_4$ solutions were tuned yellow color under all acidic/basic conditions. On the other hand, the chemical stability of $SiO_2$ and $SnO_2$-coated $CoAl_2O_4$ solution were improved when all samples pH values, respectively. Phase stability under acidic/basic condition of the core-shell type $CoAl_2O_4$ powders were characterized by transmission electron microscope, X-ray diffraction, CIE $L^*a^*b^*$ color parameter measurements.