• 한국재료학회지
• /
• 제17권3호
• /
• pp.125-131
• /
• 2007

[ $TiO_{2}-solution$ ] was aaded in $SiO_{2}-solution$ by various composition. $SiO_{2}-TiO_{2}$ thin films were obtained by the dip-coating method on the $SiO_{2}$ glass substrates, and then heat-treated at various temperature. Nano-size $TiO_{2}$ particles dispersed $SiO_{2}-TiO_{2}$ films showed absorption peak by quantum size effect at short wavelength region $350{\sim}400nm$, which made them good candidates for non-linear optical materials and photo-catalytic materials. The thickness of $SiO_{2}-TiO_{2}$ films were $300{\sim}430nm$. The contact angle of $SiO_{2}-TiO_{2}$ films for water was $5.3{\sim}47.9^{\circ}$, and therefore it is clear that $SiO_{2}-TiO_{2}$ films have super hydrophilic properties and the self-cleaning effects.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.562-564
• /
• 2001

Transformation of molecular film occurs only usually in air-water interface, 2 dimensions domain's growth and crash are achieved. Organic matter thin film that accumulate molecular film in archaism board only that consist of growth of domain can understand correct special quality of accumulation film supplying information about fine structure and properties of matter of device observing information and so on that is surface forward player and optic enemy using AFM one of SPM application by nano electronics. The stable images are probably due to a strong interaction between the monolayer film and glass substrate. We are unable to obtain molecule resolution in images of the films but did see a marked contrast between images of the bare substrate and those with the network structure film deposited onto it. Formation that prevent when gas phase state and liquid phase state measure but Could know organic matter that molecules form equal and stable film when molecules were not distributed evenly. and accumulated in solid state only.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.341-345
• /
• 2001

In this study, nano-sized powders of $Si0_2-0^{\sim}15mol%B_2O_3$ composition were prepared by sol-gel processing method using TEOS(Tetra ethyl ortho silicate) and $H_3BO_3$ solution. The powders were tape-cast on High silicate glass sheet(HSG) substrate and sintered to form a layer of undercladding for the planar light wave module, During the sol-gel processing, $H_2O/Si$ mole ratio were varied to modify the size of the powders in a range from 600 to 75nm. The dispersion of the powder was modified by changing the pH of the slurry. Sintering temperature of the tape was observed to decrease with the size of the powder and the $B_2O_3$ content in the powder. When the silica powders of 75-125nm in diameter containing 15mol% $B_2O_3$ were used, 98 TD% was obtained at $1250^{\circ}C$, which is approximately $300^{\circ}C$ reduction in sintering temperature compared with micrometer-sized powders.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1618-1620
• /
• 2002

Transformation of molecular film occurs only usually in air-water interface, 2 dimensions domain's growth and crash are achieved. Organic matter thin film that accumulate molecular film in archaism board only that consist of growth of domain can understand correct special quality of accumulation film supplying information about fine structure and properties of matter of device observing information and so on that is surface forward player and optic enemy using AFM one of SPM application by nano electronics. The stable images are probably due to a strong interaction between the monolayer film and glass substrate. We are unable to obtain molecule resolution in images of the films but did see a marked contrast between images of the bare substrate and those with the network structure film deposited onto it. Formation that prevent when gas phase state and liquid phase state measure but Could know organic matter that molecules form equal and stable film when molecules were not distributed evenly, and accumulated in solid state only.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.55-56
• /
• 2000

We report the fabrication of carbon nanostureture films with excellent electron-emission characteristics on chrome electrodes using a pre-deposited transition metal catalyst layer. The emission current densities of 1 ${\mu}A/cm^2$ and 1 $mA/cm^2$ were measured at the electric field of 2.5 and 4.8 $V/{\mu}m$, respectively, and the current fluctuation of less than 2.5% was observed at the average current density 211 ${\mu}A/cm^2$ for the measurement duration of 20 minutes. We counted more than ${\sim}10^4$ emission sites per $cm^2$ from the emission images, and also noticed good mechanical stability. Moreover, we were able to fabricate good electron-emitting carbon films on chrome electrodes on Corning glass substrates at the nominal temperature below $650^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집
• /
• pp.23-26
• /
• 2004

Monolayers of lipids on a water surface have attracted much interest as models of biological membranes, but also as precursors of multilayer systems promising many technical applications. Until now, many methodologies have been developed in order to gain a better understand. Photoisomerization in monolayers of a novel azobenzene compound, azobenzene dendrimer, was investigated for the first time by means of the absorption spectrum and Maxwell displacement current(MDC) technique. Dendrimers are well-defined macromolecules exhibiting a tree-like structure, first derived by the cascade molecule approach According to the absorption spectrum, trans-to-cis conversion ratio was estimated to the third generation of azobenzene dendrimer deposited onto a glass substrate. Temperature-dependent induced charge with trans-cis isomerization was also measured by means of MDC technique.

• 반도체디스플레이기술학회지
• /
• 제7권4호
• /
• pp.19-22
• /
• 2008

Thin film has been an increasing important subject of intensive research, owing to the fact that these films possess desirable optical, electrical and electrochemical properties for uses in many semi-conducting nano-crystal applications, such as light-emitting diodes, lasers and solar cell applications. Here, ZnSe thin films were deposited by electrochemical method for the applications of light emitting diode. Electrochemical deposition of ZnSe thin film is not easy, because of the high difference of reduction potential between zinc ion and selenium acid. In order to handle the band gap of ZnSe crystal thin films easily, electrochemical methods are promising to manufacture these films economically. Therefore we have investigated the present study to characterize zinc selenide thin films deposited on ITO glass plates electrochemically. The luminescent properties of ZnSe films have been evaluated by UV-Vis spectrometer and luminescence spectrometer. And the morphology of the film surface has been discussed qualitatively from SEM images.

• 한국표면공학회지
• /
• 제43권4호
• /
• pp.194-198
• /
• 2010

Indium doped zinc oxide films (ZIO) were deposited on non-alkali glass substrates by radio frequency (RF) magnetron sputtering at room temperature. The structural, electrical and optical properties of the ZIO films were investigated as a function of their $In_2O_3$ content (3.33-15.22 wt%). The ZIO films deposited with an $In_2O_3$ content of 9.54 wt% showed a relatively low resistivity of $9.13{\times}10^{-4}{\Omega}cm$ and a highly c-axis preferred orientation. The grain size and FWHM were mainly affected by the $In_2O_3$ content. The crystallinity and resistivity were enhanced with increasing grain size. The average transmittance of the ZIO films was over 85% in the visible region and their band gap varied from 3.22 to 3.66 eV depending on their doping ratio.

• 설비공학논문집
• /
• 제25권12호
• /
• pp.668-673
• /
• 2013

In this study, specimens with nano-sized porous thin films were manufactured by injecting fluorescence solution into the pores. We intended to find out the difference of the fluorescence intensity in each region of the specimen through an experimental apparatus that makes a temperature field. Before conducting experiments, the optimized manufacturing conditions were determined by analysis of all parameters that influence the emission intensity, and the experiments were carried out with the specimens produced in the optimized conditions. Then, the calibration curves of the fluorescence intensity versus temperature were performed by taking the intensity distributions from the specimen in various temperature fields. The surfaces of specimens were coated with Rhodamine-B (Rh-B) fluorescent dye and measured based on the fluorescence intensity. Silica (SiO2) nanoporous structure with 1-um thickness was constructed on a cover glass, and fluorescence dye was absorbed into these porous thin films.

• 설비공학논문집
• /
• 제25권12호
• /
• pp.674-678
• /
• 2013

We present a non-invasive technique to the measure temperature distribution in nano-sized porous thin films by means of the two-color laser-induced fluorescence (2-LIF) of rhodamine B. The fluorescence induced by the green line of a mercury lamp with the makeup of optical filters was measured on two separate color bands. They can be selected for their strong difference in the temperature sensitivity of the fluorescence quantum yield. This technique allows for absolute temperature measurements by determining the relative intensities on two adequate spectral bands of the same dye. To measure temperature fields, Silica (SiO2) nanoporous structure with 1-um thickness was constructed on a cover glass, and fluorescent dye was absorbed into these porous thin films. The calibration curves of the fluorescence intensity versus temperature were measured in a temperature range of $10-60^{\circ}C$, and visualization and measurement of the temperature field were performed by taking the intensity distributions from the specimen for the temperature field.