• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.345-347
• /
• 2001

전기방사(Electro-spinning)는 기존의 방사방법과는 달리 전기장의 힘을 이용하여 방사하는 방법으로 고분자용액의 적용범위가 넓고, 저렴하고 간단한 공정을 통하여, 나노크기의 섬유를 제조할 수 있는 장점이 있다. 목재 펄프를 아민옥시드계 용제의 하나인 NMMO(N-methyl-morpholine-N-oxide)에 용해시켜 습식 방사를 통하여 섬유를 제조한다. (중략)

• 한국세라믹학회지
• /
• 제55권2호
• /
• pp.145-152
• /
• 2018

Although many bone graft materials have been developed, powder graft materials are somewhat difficult to use in surgery. To solve this problem, a bone graft material in the form of a viscous paste was prepared. Hydroxyapatite was used as a bone graft material, and methyl cellulose was used to impart viscosity. Three cases of samples were prepared, and freeze-dried block type and sintered specimens were made from the paste. The recrystallization of the graft material in a simulated body fluid and the degree of graft adhesion with a tooth were observed by scanning electron microscopy (SEM). The test for cytotoxicity was carried out and the sample was grafted into the back of a mouse to confirm the presence or absence of side effects in the animal's body. Based on these investigations, composites of this type are expected to be applicable for bone grafts.

• International Journal of Oral Biology
• /
• 제43권2호
• /
• pp.83-91
• /
• 2018

Nonthermal atmospheric plasma has been studied for its many biomedical effects, such as tooth bleaching, wound healing, and coagulation. In this study, the effects of dentinal tubules occlusion were investigated using fluoride-carboxymethyl cellulose (F-CMC) gel, nano-sized hydroxyapatite (n-HA), and nonthermal atmospheric plasma. Human dentin specimens were divided to 5 groups (group C, HA, HAF, HAP, and HAFP). Group HA was treated with n-HA, group HAF was treated with n-HA after a F-CMC gel application, group HAP was treated with n-HA after a plasma treatment and group HAFP was treated with n-HA after a plasma and F-CMC gel treatment. The occlusion of dentinal tubules was investigated using scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDS), which shows Ca/P ratio. In the EDS results, a higher Ca/P ratio was shown in the groups including n-HA than in the control group. The specimens of group HAP and HAFP had a higher Ca/P ratio in retentivity. In the SEM results, there was not a significant difference in the amount of times applied. Therefore, this study suggests F-CMC gel and n-HA treatment using nonthermal atmospheric plasma will be a new treatment method for decreasing hypersensitivity.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2008년도 춘계학술대회
• /
• pp.178-182
• /
• 2008

The bleached red algae fiber(BRAF) showed very similar crystallinity to the cellulose, furthermore, it has higher thermal decomposition temperature than that of the microcrystalline cellulose(MCC). Polypropylene biocomposites reinforced with BRAF have been fabricated with various BRAF contents by compression molding method and their mechanical and thermomechanical properties have been studied. The mechanical strength as tensile, impact and flexural modulus of BRAF/PP biocomposites were gradually improved with increasing the BRAF content, and thermal property which against the thermal expansion was markdly improved, especially. These results are compared with chopped non-woody fibers as Henequen or Kenaf, BRAF was more effective for fabrication of biocomposites reinforced small-sized fibers. The red algae fiber reinforced biocomposites has the applicability such as electronics, biodegradable products and small-structure composites.

• The Journal of Advanced Prosthodontics
• /
• 제7권6호
• /
• pp.484-495
• /
• 2015

PURPOSE. This study was to evaluate the effects of bacterial cellulose (BC) membranes as a barrier membrane on guided bone regeneration (GBR) in comparison with those of the resorbable collagen membranes. MATERIALS AND METHODS. BC membranes were fabricated using biomimetic technology. Surface properties were analyzed, Mechanical properties were measured, in vitro cell proliferation test were performed with NIH3T3 cells and in vivo study were performed with rat calvarial defect and histomorphometric analysis was done. The Mann-Whitney U test and the Wilcoxon signed rank test was used (${\alpha}<.05$). RESULTS. BC membrane showed significantly higher mechanical properties such as wet tensile strength than collagen membrane and represented a three-dimensional multilayered structure cross-linked by nano-fibers with 60 % porosity. In vitro study, cell adhesion and proliferation were observed on BC membrane. However, morphology of the cells was found to be less differentiated, and the cell proliferation rate was lower than those of the cells on collagen membrane. In vivo study, the grafted BC membrane did not induce inflammatory response, and maintained adequate space for bone regeneration. An amount of new bone formation in defect region loaded with BC membrane was significantly similar to that of collagen membrane application. CONCLUSION. BC membrane has potential to be used as a barrier membrane, and efficacy of the membrane on GBR is comparable to that of collagen membrane.

• 멤브레인
• /
• 제21권1호
• /
• pp.98-105
• /
• 2011

본 연구에서는 셀룰로오스 트리아세테이트(CTA) 고분자를 이용한 중공사형 분리막을 상분리법에 의해 제조하였으며, 제조된 중공사 분리막의 기체분리 성능을 평가하였다. 제조된 중공사형 분리막의 기체분리 특성을 부여하기 위해서 1,4-dioxane을 10 wt.% 내외로 첨가하였다. 1,4-dioxane의 첨가에 의해 중공사 표면에 치밀층 형성을 위해서는 1,4-dioxane이 표면에서 증발되는 것이 필수적이며, 이를 위해 air-gap의 조절에 의해 중공사 표면에 치밀층이 생성되도록 하였다. 제조된 CTA 중공사형 기체분리막의 표면 및 단면의 모폴로지 측정을 위하여 전자주사현미경을 사용하였다. 또한 CTA 중공사형 기체분리막의 산소, 질소, 이산화탄소에 대한 기체투과도를 측정하였으며, 이 때 $P_{CO2}$ = 17 GPU, ${\alpha}_{CO2/N2}$ = 48을 나타내었다.

• Journal of the Korean Wood Science and Technology
• /
• 제41권4호
• /
• pp.302-309
• /
• 2013

Sodium hydroxide-urea 수용액을 이용한 다공성 셀룰로오스계 에어로겔은 용해, 겔화, 재생, 유기용매 치환과 동결건조과정에 의해 제조되었다. 에어로겔의 구조적 특성과 다공성은 주사전자현미경과 질소흡착장치를 이용하여 분석하였다. 그 결과, 용해펄프는 완전히 용해되었지만, 여과지와 홀로셀룰로오스는 원심분리과정에서 수용액에 용해된 부분과 용해되지 않은 부분으로 구분되었다. 용해펄프 에어로겔의 표면은 다공성 공극, 내부는 그물모양의 망목상 구조가 관찰되었다. 여과지와 홀로셀룰로오스 에어로겔은 표면이 압축된 다공성 네트워크 형태였고, 내부는 open-pore 구조의 나노피브릴 네트워크로 구성되었다. 홀로셀룰로오스 에어로겔에서 수용액에 용해되지 않는 형태의 섬유들이 관찰되었다. 용해펄프로부터 만들어진 에어로겔의 비표면적은 260~326 $m^2/g$ 범위였고, 농도 증가와 함께 감소하였다. 그러나 여과지 에어로겔의 비표면적(198~418 $m^2/g$)은 농도 증가와 함께 증가하였다. 홀로셀룰로오스 에어로겔은 2% 농도에서는 137 $m^2/g$로 농도의 증가와 함께 증가하여 4% 농도에서 401 $m^2/g$로 최댓값을 보여주었고, 5% 농도에서 감소하였다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.468-472
• /
• 2003

Recently, genetic engineering techniques have been used to display various heterologous peptides and proteins (enzyme, antibody, antigen, receptor and fluorescence protein, etc.) on the yeast cell surface. Living cells displaying various enzymes on their surface could be used repeatedly as 'whole cell biocatalysts' like immobilized enzymes. We constructed a yeast based whole cell biocatalyst displaying T. reesei cellobiohydrolase I (CBH I ) on the cell surface and endowed the yeast-cells with the ability to degrade cellulose. By using a cell surface engineering system based on ${\alpha}-agglutinin,$ CBH I was displayed on the cell surface as a fusion protein containing the N-terminal leader peptide encoding a Gly-Ser linker and the $Xpress^{TM}$ epitope. Localization of the fusion protein on the cell surface was confirmed by confocal microscopy. In this study, we report on the genetic immobilization of T. reesei CBH I on the S. cerevisiae and hydrolytic activity of cell surface displayed CBH I.

• 펄프종이기술
• /
• 제47권6호
• /
• pp.154-163
• /
• 2015

Because of acute or chronic intoxication by carbon disulfide, viscose rayon industry is strictly subjected to environment regulatory approval. Recently, non-wood fibers are frequently considered as a raw materials for the manufacture of specialty paper for the higher physical strength and functionality. Among the non-wood fibers, hemp bast fiber is one of the most widely used materials in viscose rayon yarn industries. In this study, the handsheet for manufacturing the viscose rayon yarn was prepared with wood pulp fibers and hemp bast fibers. The proper mixing ratio of wood fibers and hemp bast fibers with dry-strength agent and nano-celluloses was analysed in terms of physical and mechanical strength of sheet for viscose rayon yarn. The papermaking conditions for high mechanical strength of sheet were obtained by mixing the SwBKP and HwBKP fibers with freeness level of 200 mL CSF. The dual polymer system by controlling the addition ratio of PVAm and anionic PAM was also important. The addition of nano-cellulose into wet-end furnishes increased the physical strength of sheet, and improved the paper structure for the production of viscose rayon yarn.

• 한국세라믹학회지
• /
• 제55권1호
• /
• pp.90-93
• /
• 2018

In this study, n-type $Bi_2Te_3$ in thermoelectric scrap is recovered through a wet reduction process. The recovered powder (tellurium) is grafted onto gas sensor in a new application that is not a thermoelectric device. Bismuth-rich powder is prepared by adding hydrazine when pH of the solution is brought to 13 using NaOH. The pH of the filtered solution was reduced using $HNO_3$, and then hydrazine was added to perform the re-reduction reaction. The tellurium-rich powder can be obtained through this reaction. The elemental analysis for these powders is confirmed by energy dispersive X-ray spectroscopy (EDS) analysis ; the successful separation of bismuth and tellurium is confirmed. Separated tellurium powder is mixed with DMF solvent and ethyl cellulose binder to confirm gas sensing properties. The tellurium paste was exposed in $NO_x$ atmosphere and exhibited a rapid reaction rate and recovery rate of less than 3 minutes for the gas.