• 한국농공학회지
• /
• 제28권3호
• /
• pp.89-98
• /
• 1986

This study was carried out for the settlement and camber of earth dam by the changes of the density. The testing material was taken five kinds of Soil used as banking material and it was compacted by 100, 95, 90, 85 and 80% compaction degree. The results of the settlement of earth dam whose height ranges from 10m to 50m are as follows. 1.The more the fine particle (n) increases, the higher the liquid limit (WL) and the lower the dry density (rd) becomes as follows; rd=2. 22-0. 0052n (gr/cm$_3$) rd=2. 394-0. 0164WL rd=2. 185-(5. 8n-2. 5WL)X10-$_3$ 2. The higher the optimum moisture content (Wo) becomes, the lower the density becomes as follows; rt,=2. 68-0. 028Wo rd=2. 578-0. 04Wo 3. 3.Most of the consolidation occurs immediately by loading and the more the fine particle increases, the lower the coefficient of consolidation becomes. 4.The more the fine particle increases and lower the compaction degree (D) becomes,the lower the pre-consolidation load (Pc) becomes but on the contrary the compression index (Cc) becomes higher. Those equation is as follows. Pc=3. 32-(4. 3n-3. 0D) X10-2 (kg/cm$^2$) Cc=0. 41+(1. 33n-4. 44D) X10-$^3$ 5.The more the consolidation load (P) increases, the lower the coefficient of volume change (mv) becomes with mv=ap-b, the higher the consolidation ratio (u) becomes with U= (0. 6~1. 35)PO.4 6.The more the fine particle (n) increases, the more the settlement of dam occurs with U=anb and 60-80% of the settlement occurs under construction. 7.The camber of dam has higher value in condition that has more fine particle, poorer compaction and higher height of dam. In the dam construction about twice value of table 7 is required for dam safety.

• Journal of Preventive Medicine and Public Health
• /
• 제54권1호
• /
• pp.31-36
• /
• 2021

Objectives: Non-traditional materials are used for mask construction to address personal protective equipment shortages during the coronavirus disease 2019 (COVID-19) pandemic. Reusable masks made from surgical sterilization wrap represent such an innovative approach with social media frequently referring to them as "N95 alternatives." This material was tested for particle filtration efficiency and breathability to clarify what role they might have in infection prevention and control. Methods: A heavyweight, double layer sterilization wrap was tested when new and after 2, 4, 6, and 10 autoclave sterilizing cycles and compared with an approved N95 respirator and a surgical mask via testing procedures using a sodium chloride aerosol for N95 efficiency testing similar to 42 CFR 84.181. Pressure testing to indicate breathability was also conducted. Results: The particle filtration efficiency for the sterilization wrap ranged between 58% to 66%, with similar performance when new and after sterilizing cycles. The N95 respirator and surgical mask performed at 95% and 68% respectively. Pressure drops for the sterilization wrap, N95 and surgical mask were 10.4 mmH2O, 5.9 mmH2O, and 5.1 mmH2O, respectively, well below the National Institute for Occupational Safety and Health limits of 35 mmH2O during initial inhalation and 25 mmH2O during initial exhalation. Conclusions: The sterilization wrap's particle filtration efficiency is much lower than a N95 respirator, but falls within the range of a surgical mask, with acceptable breathability. Performance testing of non-traditional mask materials is crucial to determine potential protection efficacy and for correcting misinterpretation propagated through popular media.

• 한국세라믹학회지
• /
• 제30권1호
• /
• pp.25-33
• /
• 1993

Formation reaction of Mn-Zn ferrite depending on various synthetic conditions of wet process was investigated using FeCl2.nH2O(n≒4), MnCl2.4H2O, ZnCl2 as starting materials. A stable intermediate precipitate was formed by the addition of H2O2. And the precipitate was hard to transform to spinel phase of Mn-Zn Fe2O4. Single phase of Mn-Zn Fe2O4 spinel was obtained above 8$0^{\circ}C$ reaction temperature. The powder had spherical particle shape and 0.02~0.05${\mu}{\textrm}{m}$ particle size. Fe(OH)2 solid solution, -FeO(OH) solid solution, -FeOOH, Mn-Zn Fe2O4 spinel were formed with air flow rate 180$\ell$/hr. However, single phase of Mn-Zn Fe2O4 spinel with cubic particle shape and 0.1~0.2${\mu}{\textrm}{m}$ particle size was formed with synthetic conditions of 8$0^{\circ}C$ and 90 munutes. The particle shape of the -FeOOH was needle-like.

• 대한수학회보
• /
• 제42권4호
• /
• pp.855-867
• /
• 2005

Shattering or disintegration of mass is a well known phenomenon in fragmentation processes first introduced by Kol­mogorov and Filippop and extensively studied by many physicists. Though the mass is conserved in each break-up, the total mass decreases in finite time. We investigate this phenomenon in the n particle system. In this system, shattering can be interpreted such that, in uniformly bounded time on n, order n of mass is located in order o(n) of clusters. It turns out that the tagged particle processes associated with the systems are useful tools to analyze the phenomenon. For the newly defined stochastic shattering based on the above ideas, we derive far sharper conditions of fragmentation kernels which guarantee the occurrence of such a phenomenon than our previous work [9].

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.561-562
• /
• 2006

The purpose of this study was to investigate the root cause of adhesion of silica and ceria particles during Poly-Si, TEOS, and SiN CMP process, respectively. The zeta-potentials of abrasive particles and wafers were observed negative surface charges in the alkaline solutions. SAC and STI patterned wafers have intermediate values of their composition surface's zeta potentials. The theoretical interaction force and adhesion force of silica and ceria particle were calculated in solution with acidic, neutral and alkaline pH. A stronger attractive force was calculated for silica and ceria particles on wafers in acidic solutions than in alkaline solutions. The theoretical interaction forces of the SAC and STI patterned wafers have intermediate values of their constitution wafer's values. The adhesion forces is observed lower values in alkaline solutions than in acidic solutions. And the ceria particle has lower adhesion than that of the silica particle.

• Korean Chemical Engineering Research
• /
• 제58권3호
• /
• pp.480-485
• /
• 2020

Onsager 이론으로 확장된 Maxwell-Wagner 분극 모델을 이용하여 전도성 입자로 제조된 전기유변(Electrorheological, ER) 액체의 전기유변 현상에 대한 전산 모사를 수행하였다. 확장된 Maxwell-Wagner 분극 모델을 이용한 전산 모사는 전도성 입자로 제조된 전기유변 액체의 특성인 비제곱 전기유변 현상(Δτ∝Eⁿ, n≈1.5)을 확인하였다. 전단 흐름에서 전단응력이 정상상태에 도달하는 시점은 전기장 하에서 생성된 사슬 모양 구조가 전단 흐름에 의해 깨짐과 재생성이 정상상태에 도달하는 지점으로 나타났다. 또한, 전단 속도의 증가에 따라 전단응력이 최솟값을 보이는 전도성 입자를 기반으로 한 전기유변 액체의 현상도 관찰하였으며, 이것은 입자의 사슬 모양 구조가 무작위 배열로 바뀌는 순간에 발생하는 것임을 관찰하였다. 입자의 부피 분율 ϕ가 증가에 따라 전단응력은 증가하다가 일정해지는 경향도 관찰하였다.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.566-571
• /
• 2010

Dispersion behavior of the slurries consisted of bimodal-type AlN powders was examined in non-aqueous solvent system. Azotropic solvent system and copolymer acidic dispersant were applied to the slurries. Measurements of the sedimentation height and the viscosity of the each slurry, and the test of particle size distribution of the each powder sample were conducted as examinations for the dispersion behavior at the various dispersant contents. The bimodal-type particle size distribution was continued after addition of the dispersant and small particle portions were increased as the dispersant content increases. The density of the green sheet was also increased as the dispersant content increases and a green density of $2.114\;g/cm^3$ was obtained at the sample prepared from 2.4 wt% dispersant content. The increase of large particle portions resulted in the surface defects of the green sheets.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.1549-1554
• /
• 2015

교반조 바닥에 방해판이 부착된 경우 유동특성 및 입자부유특성을 실험적으로 연구하였다. 입자의 유동상태는 교반조 바닥 중심으로부터 상승류가 증가하였다. 입자부유 실험으로부터 에크만 경계층의 발달에 의해 입자부유가 촉진됨을 알았다. 본 실험범위 내에서의 임펠러 및 교반조 바닥 방해판의 최적조건을 다음과 같이 나타내었다. 교반임펠러 최적조건 : $n_p=6$, d/D=0.5, b/d=0.3, 교반조 바닥 방해판 최적조건 ; $n_b=6$, $d_b/D=0.5$, $b_w/D=0.05$.

• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.554-560
• /
• 2017

Reduction reactivity of new oxygen carriers for chemical looping combustion system were investigated using $CH_4$ as a reduction gas in a bubbling fluidized bed reactor and compared with that of former SDN70 oxygen carrier. New oxygen carriers showed good reduction reactivity at different $CH_4$ concentration. N018-R2 particle represented better reactivity than SDN70 at high $CH_4$ concentration. N018-R2 particle showed higher fuel conversion and $CO_2$ selectivity than those of SDN70 particle within the temperature range of $750-900^{\circ}C$. Moreover, attrition loss of N018-R2 particle was almost same with that of SDN70 particle. Consequently, we could select N018-R2 particle as the best oxygen carrier.

• 한국입자에어로졸학회지
• /
• 제9권1호
• /
• pp.1-6
• /
• 2013

New evaluation method for the particle size and morphology via change of ground particle during a grinding process was investigated. The grinding experiments were carried by a planetary ball mill. The relationship between the particle outline of the scanning electron microscopy photograph and measurement line, the measurement contact number was evaluated. The value of contact number decreased with the increase in the particle size of the ground sample, and varied with the experimental conditions. The value of contact number, which is related to the particle size of the raw sample, changed at the various experimental conditions.