• Analytical Science and Technology
• /
• v.11 no.5
• /
• pp.366-373
• /
• 1998

Polydentate Schiff base ligands, BSDT(1,9-bis(2-hydroxyphenyl)-2,5,8-triaza-1,8-nonadiene) having $N_3O_2$ atoms, BSTT(1,12-bis(2-hydroxyphenyl)-2,5,8,11-tetraaza-1,11-dodecadiene) having $N_4O_2$ atoms, BSTP(1,15-bis(2-hydroxyphenyl)-2,5,8,11,14-pentaaza-1,14-pentadodecadiene) having $N_5O_2$ atoms were synthesized. Protonation constants of these polydentate ligands were measured by potentiometry. Stability constants of the complexes between these ligands and the metal ions such as Cu(II), Ni(II) and Zn(II) were measured in DMSO by a polarographic method. It was observed that all metal(II) ions employed in this study formed 1:1 complexes with Schiff base ligands. Stability constants for the complex formation were in the order of Cu(II)>Ni(II)>Zn(II), and for the ligands were in the order of BSTP>BSTT>BSDT. There are due to the increase in the number of donor atoms. Both enthalpy and entropy changes were obtained in negative values. Exothermicity for the complex formation indicated tight binding between the ligands and metal ions. The negative entropy change would be related to the fact that solvent molecules are strongly interacting with the metal complexes.

• Journal of the Korean Ceramic Society
• /
• v.56 no.5
• /
• pp.474-482
• /
• 2019

Chromium-doped zinc ferrite nanoparticles with the general formula Cr_yZnFe_2-yO₄ (y = 0, 0.025, 0.05, 0.075, and 0.1) were synthesized by a surfactant-assisted chemical co-precipitation route using metal nitrate salt precursors. The phase purity and structural parameters were determined by powder X-ray diffraction. The concentration of Cr³⁺ doped into ZnFe₂O₄ (ZF) noticeably affected the crystallite size, which was in the range of 22 nm to 36 nm, and all samples showed a single cubic spinel structure without any secondary phase or impurities. The lattice parameter, X-ray density, and skeletal density increased with an increase in the Cr-doping concentration; on the other hand, a decreasing trend was observed for the particle size and porosity. The influence of Cr³⁺ substitution on ZF magnetic properties were studied under an applied field of 15 kOe. The overall results revealed that the incorporation of a small amount of Cr dopant changed the structural, electrical, and magnetic properties of ZF.

• Microbiology and Biotechnology Letters
• /
• v.8 no.3
• /
• pp.181-191
• /
• 1980

For the purpose of studies on the citric acid production, some experiments were carried out with isolated strains. The results obtained were as follows. 1) The optimal culture media of the strain M-80 in surface culture contained 140g of sucrose, 3.0g of (N $H_4$)$_2$S $O_4$, 1.5g of K $H_2$P $O_4$, 0.2g of MgS $O_4$.7$H_2O$, 3.0mg of F $e^{++}$, 1.0mg of Z $n^{++}$, 0.5N HCI to a pH of 5.0 and distilled water to 1.0 liter; and that of the strain M-315 in surface culture contained 140g of sucrose, 2.0g of N $H_4$N $O_3$, 1.0g of K $H_2$P $O_4$, 0.25g of MgS $O_4$. 7$H_2O$, 2.0mg of F $e^{++}$, 2.0mg of Z $n^{++}$, 0.05mg of C $u^{++}$, 0.5N HCI to a pH of 4.5 and distilled water to 1.0 liter. While that of the strain M-315 in submerged culture contained 140g of sucrose, 2.5g of N $H_4$N $O_3$, 1.5g of K $H_2$P $O_4$, 0.3g of MgS $O_4$. 7$H_2O$, 3.0mg of F $e^{++}$, 0.1mg of C $u^{++}$, 0.5N HCI to a pH of 4.5 and distilled water to 1.0 liter. The optimal temperature and size of inoculum were mostly 28-3$0^{\circ}C$, 10$^{7}$ -10$^{8}$ spores/50ml, respectively. 2) Through the course of citric acid production, the growth of strains had nearly been completed, pH value was rapidly decreased below 2.0 and the content of sugar was also reduced, while the accumulation of citric acid in media was remarkably begun in about 3-4 days. The yields of citric acid generally reached the maximum level in 8-10 days in surface or submerged fermentation process. 3) Methanol was effective citric acid production when they were added to fermentation media. In the case of surface culture, by addition of 2％ (strain M-80), 3％ (strain M-315), the yields of citric acid was increased 6.5％, 20.6%, respectively and 5.0% yield was increased by addition of 3% methanol in submerged culture media of the strain M-315. 4) Chromatography analysis of culture broth after fermentation under optimal culture conditions detected that the majority of acid in media was citric acid. 72.1mg/ml, 98.1mg/ml, of citric acid were determined in surface culture media by strains of M-80, M-315, and 59.8 mg/ml of citric acid was contained in the submerged culture media by the strain M-315. strain M-315.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.451-454
• /
• 2006

WGS reaction over Mo2C and ceria based catalysts was investigated to develop an alternative commercial Cu-Zn/Al2O3 catalyst for fuel processor and hydrogen station. The Mo2C catalysts were prepared by a temperature programmed method and the various metal supported cerium oxide catalysts were prepared by an Impregnation method. The catalysts were characterized by the N2 physisorption, Co chemisorption, XRD, TEM and TPR. It was found that Mo2C and 0.2wt% Pt-40wt%, Ni/CeO2 catalysts had higher activity and stability than the Cu-Zn/Al203 above $260^{\circ}C$. Moreover, CO conversion of more than 85% was observed at $280{\sim}300^{\circ}C$. But all catalysts were deactivated during the thermal cycling runs. The results suggest that these catalysts are an attractive candidate for the alternative Cu-Zn/Al2O3 catalyst for fuel processor and hydrogen station applications.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.4
• /
• pp.77-81
• /
• 2010

The AZO thin films were deposited on the corning 1737 glass plate by the RF magnetron sputtering and effects of working pressure and oxygen contents on the electrical properties were investigated. XRD spectra showed a preferred orientation along the c-axis and a minimum FWHM for the 70mTorr. From the surface analysis (AFM), the number of crystal grain of AZO thin film increased as working pressure increased. The film deposited with 70mTorr of working pressure showed n-type semiconductor characteristic having suitable resistivity $-1.59{\times}10^{-2}{\Omega}cm$, carrier concentration $-10.1{\times}10^{19}cm^{-3}$, and mobility $-4.35cm^2V^{-1}s^{-1}$ while other films by 7 mTorr, 20 mTorr of working pressure closed to metallic films. The films including the oxygen represent stoichiometric composition similar to the oxide. The transmittance of the film was over 85% in the visible light range regardless of the changes in working pressure and oxygen contents.

• Environmental Engineering Research
• /
• v.19 no.3
• /
• pp.205-214
• /
• 2014

Petroleum a vital commodity affecting every aspect of 21st century. Toxicity and adverse effects of sulphur as catalyst in petroleum products is of great concern required development of techniques for desulphurization in compliance with the International standards. Installation of desulphurizing units costs over $200 million per unit placing economic burden on developing countries like Pakistan. Present study analysis of commercial fuels (station petrol and jet fuel JP8) on gas chromatography-mass spectrometry (GC-MS) identified sulphur concentration of 19.94 mg/L and 21.75 mg/L, respectively. This scenario urged the researcher to attempt synthesis of material that is likely to offer good adsorption capacity for sulphur. Following protocol of sol-gel method, transition metals (Ni, Cu, Zn) solution is gelated with tetraethoxysilane (TEOS; silica precursor) using glycerol. Fourier transform infrared spectroscopy (FTIR) spectra revealed bonding of Zn-O, Cu-O, and Ni-O by stretching vibrations at $468cm^{-1}$, $617cm^{-1}$, and $468cm^{-1}$, respectively. Thiophene and Benzothiophene mixed in n-heptane and benzene (4:1) for preparation of Model Fuels I and II, respectively. Each of silica based metal was applied as adsorbent in batch mode to assess the removal efficiency. Results demonstrated optimal desulphurization of more than 90% following efficacy order as Si-Ni > Si-Zn > Si-Cu based adsorbents. Proposed multilayered (Freundlich) adsorption mechanism follows ${\pi}$-complexation with pseudo secnd order kinetics.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.11
• /
• pp.634-640
• /
• 2017

Toxicity and fate assessment is necessary in the evaluation of the environmental, health and safety risks of engineered nanomaaterials (ENMs). Therefore, in order to ensure the reproducibility, reliability and relevance of ENMs toxicity results, stable and monomodal dispersion protocols in toxicity test media are needed. Zinc oxide nanoparticles (nZnO) are widely used in various products such as cosmetic products, paper, paints etc. In this study, nZnO dispersions in ecotoxicity test media were produced by following a series of steps of modified National Institute of Standards and Technology (NIST) Special publication 1200-5. In addition, natural organic matter (humic acid (HA)) was used as a stabilizing agent to disperse nZnO in the test media. The hydrodynamic diameters (HDD) of the nZnO in dispersion ranged between 150 and 200 nm according to the dynamic light scattering (DLS) measurement. Based on these dispersions in ecotoxicity test using ecological species (Oryzias latipes, Daphnia magna, Pseudokirchneriella subcapitata and Chironomusus riparius), dispersion protocol was found to have a considerable potential in ecotoxicity test of ENMs.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.5
• /
• pp.371-381
• /
• 1997

Precipitation sampls were collected in Chonju-city during October 1994 to September 1995 and were analysed for major ions (N $a^{+}$, $K^{+}$, $Ca^{2+}$, $Mg^{2+}$, C $l^{[-10]}$ , NO/$_3$, S $O_4$$^{2-}$) and trace metals (Al, Cd, Ni, Pb, Sr, Zn) in addition to pH, in order to understand the chemical characteristics of acid rain and to estimate the origin of the determined ions. Most rain showed a neutral or alkaline character, and only 35% had a pH lower than 5.6. S $O_4$$^{2-}$ and N $O_3$$^{[-10]}$ are identified as the primary contributors to precipitation acidity in this region. Neutralization of precipitation acidity occurs as a result of the dissolution of alkaline compounds containing $Ca^{2+}$, $Mg^{2+}$ and $K^{+}$. S $O_4$$^{2-}$ and N $O_3$$^{[-10]}$ precipitation concentrations exhibit a seasonal pattern in which higher concentrations are observed during spring months and lower concentrations during summer months. However, the seasonal behavior of $H^{+}$ concentrations differs from this pattern, in that the highest concentrations occur during autumn months, owing to the different influence of neutralization processes. In all rain, S $O_4$$^{2-}$ concentration exceeded NO/$_3$$^{[-10]}$ concentration. The contribution of maritime sources to the total S $O_4$$^{2-}$ concentration was very low or negligible. For rain strongly affacted by yellow sand, $Ca^{2+}$, $Mg^{2+}$ and $K^{+}$ ions show a sharp increase in concentration, reflecting the increased amount of dust and soil suspended in atmosphere. At the same time, S $O_4$$^{2-}$ and N $O_3$$^{[-10]}$ concentrations are at their highest levels while $H^{+}$ values are not comparably elevated, presumably beacause much of the acidity has been neutralized by alkaline substances. The seasonal variance of trace metal concentrations in rainwater is similar to that of major cations. The annual wet flux of acidic pollutants and trace metals wat calculated to be as follows: N $O_3$$^{[-10]}$ ; 2.32 g/$m^2$, S $O_4$$^{2-}$, 5.34 g/$m^2$, Al; 6.30 mg/$m^2$, Cd; 0.62 mg/$m^2$, Ni; 4.08 mg/$m^2$, Pb: 9.76 mg/$m^2$, Sr; 5.94 mg/$m^2$, Zn; 111 mg/$m^2$./$m^2$.

• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.123-136
• /
• 2010

In order to remediate heavy metal contaminated Nong island, Maehyang-ri shooting range soils through the batch reactor scale washing were evaluated. The experiment texture soil of N3 in the Nong island at north side incline was (g)mS containing 12.9% gravel, 47.0% sand, 35.1% silt and 5.0% clay. And the N3 soil area was contaminated with Cd($22.5\pm1.9$ ppm), Cu($35.5\pm4.0$ ppm), Pb($1,279.0\pm5.1$ ppm) and Zn($403.4\pm9.8$ ppm). The EDTA(ethylene diamine tetra acetic acid, $C_{10}H_{16}N_2O_8$) in the N3 soil was observed as most effective extractants among the 5 extractants(citric acid, EDTA, phosphoric acid, potassium phosphate and oxalic acid) tested. And chemical partitioning of heavy metals after washing N3 soil with EDTA was evaluated. Removal efficiency of residual fractions was higher than that of non-residual fractions. To choose EDTA extractant which is the most effective in soil washing technology using batch reactor process cleaning Pb and Zn contaminated sits; Pb and Zn removal rates were investigated 92.4%, 94.0% removal(1,000 mM, soil:solution=5, $20^{\circ}C$, 24 hour shaking, pH=2, 200 RPM), respectively. The results of the batch test showed that the removal efficiency curve was logarithmic in soil was removal. Thus, EDTA washing process can be applied to remediate the Pb and Zn contaminated soil used in this study.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.1
• /
• pp.78-88
• /
• 1985

Nitrogen fertilizer effectiveness on rice production was studied to evaluate the different forms and sources. Seven kind of nitrogen fertilizers were applied in two levels, 15 and 30 kg per 10a on Jinjubyeo (Japonica type) in silt loam paddy soil of pot cultivation. The results were summerized as follows; 1. pH in soils was decreased with enhancement of ammonium sulfate application in $NH_4-N$, but it was increased with times after nitric-acid application and PH change in soil was not remarkable when $NO_3-N$ with accessory component was applied. 2. $NH_4-N$ contents in soil were the lowest at 2 weeks after application in N 15kg/10a regardless of different sources of nitrogen fertilizer. $NO_3-N$, in N 30kg/10a, was decreased continuously until 4 weeks, while $NH_4-N$, Urea-N were at minimum during 2-3 weeks. 3. Growth of culm length and straw weight applied with AN (Ammonium Nitrate), AS (Ammonium Sulfate) and urea were superior to the form of nitrate. While NA (Nitric Acid), PN (Potassium Nitrate) and CN (Calcium Nitrate) plot of the $NO_3-N$ was the dominant fertilizers for root elongation. 4. Brown rice yields were increased dominantly by $NH_4-N$ application such as AS or AP than $NO_3-N$ pot. But the yields in case of $NO_3-N$ application CN, PN and NA were decreased. 5. N, P, Mg and Mn content of straw ranked the effectiveness of nitrogen forms as $NH_4-N$, Urea-N and $NH_4-N+NO_3-N$, while K, Ca and $SiO_2$ content of straw in $NO_3-N$ fertilizer plot were high while N, P, Mg, Mn, Fe and Mg were low. 6. Increament of nitrogen absorption in straw was stimulated by enhancement of phosphorous absorption and the growth and yield of rice plant were increased. Absorption of N, P, Ca and Mg was decreased by CN application. Absorption of N, P and Mg also was decreased by $NO_3-N$ application and N, P, Mg or Ca content were seemed to simulated the growth and yield of rice plant. 7. $SiO_2$, Zn and Fe contents of the root at harvest stage were higher than those of the straw. N, P, Mg, Mn, Zn and Fe contents were high in $NH_4-N$ and Urea treatment. While K, ca and $SiO_2$ contents, however, were high in $NO_3-N$ treatment.