• 대한인간공학회지
• /
• 제24권3호
• /
• pp.11-27
• /
• 2005

The objectives of this study are to analyze representative wrist postures while using hand tools and parts at general assembly processes, to evaluate perceived discomfort on the wrist when external loads are present, and to suggest an evaluation and prediction model of perceived discomfort. Sixteen subjects participated in an experiment to appraise perceived discomfort. Three types of the wrist postures with five levels of non-neutralities were analyzed when five levels of external load were applied to each posture. The ANOVA results showed that the perceived discomfort of wrist postures was significantly affected by both the wrist posture and external load (p$<$0.001). It was also shown that some of the interactions between external loads and the wrist postures(Flexion/$Extension^*$Load, Flexion/$Extension^*$supination/pronation, ulnar/radial $deviation^*$supination/pronation) were significant(p$<$0.001). The result implies that a new posture classification scheme for workload assessment methods may be needed to reflect such effects of external load and wrist posture. A regression model of perceived discomfort was developed with respect to wrist posture and external load from the experimental data. A subsequent experiment revealed that the correlation coefficient between the predicted values of perceived discomfort from the model and the actual values obtained from the experiment was about 0.98. It is expected that the results help to properly estimate the body stress resulting from worker's postures and external loads and can be used as a valuable design guideline to analyze potential hazard of musculoskeletal diseases in industry.

• 응용통계연구
• /
• 제31권3호
• /
• pp.353-366
• /
• 2018

영상에 의한 인체의 운동 분석에서 발생하는 오차 중 가장 큰 부분을 차지하는 것은 피부와 같은 연조직의 골격에 대한 상대운동이며 이를 STA라 한다. 본 연구의 목적은 고관절 운동 중 대퇴에서 발생하는 STA를 선형혼합모형을 이용하여 예측하는 것이다. 모형에 포함되어 있는 고정효과는 고관절 회전중심과 마커의 위치로 대퇴 골격에 의한 운동의 효과, 임의효과는 고관절 중심으로부터 각 마커의 편차로 STA에 의한 효과로 각각 가정하였다. 이를 위하여 근골격계 질환 경력이 없는 다섯 명의 남성 피험자를 선정하여 대퇴에 아홉 개의 마커를 부착하여 고관절의 기능적 운동을 수행하였다. 동시에 고속카메라를 이용하여 마커의 3차원 좌표를 얻었다. 이 3차원 위치벡터에 선형혼합모형을 적용하여 임의효과를 예측하였다. 분석결과 다섯 명의 피험자는 비슷한 패턴을 보였다. 고관절에 가까운 지점의 STA가 큰 것으로 나타났으며 작은 크기를 보인 부분은 원위 대퇴의 전방이다.

• 대한기계학회논문집A
• /
• 제34권9호
• /
• pp.1145-1151
• /
• 2010

본 논문은 형상기억합금 와이어에 의해 구동되는 점핑로봇에 대한 연구로서 기구의 설계와 컴퓨터 시뮬레이션을 포함하고 있다. 인간과 같은 척추동물 하지 근골격계의 구조와 기능을 모방한 구조의 점핑 기구를 설계하였다. 점핑 기구의 각 다리는 대퇴부, 정강이, 발의 세 부분으로 구성되고, 점핑에 필수적인 단일관절근육인 대둔근, 양관절근육인 대퇴직근과 비복근을 포함하는 구조이다. 각 근육을 형상기억합금 와이어로 대체한 컴퓨터 모델로 시뮬레이션한 결과, 로봇의 최대 점핑 높이가 로봇 신장의 약 4 배임을 확인하였다. 또한 구조가 보다 단순화된 로봇 모델과 점핑 성능을 비교하였고, 그 결과 근골격계를 모방한 모델이 점핑 높이 면에서 3.3 배 우수한 것으로 나타났다. 이러한 컴퓨터 시뮬레이션을 통하여 형상기억합금이 소형 점핑로봇의 작동기로 사용하기에 적합함을 확인하였다.

• 대한통합의학회지
• /
• 제9권1호
• /
• pp.33-40
• /
• 2021

Purpose : The fascia is the body's largest sensory organ affected by mechanical stimuli such as pressure. Fascial distortion model (FDM) is one of the fascia treatment techniques, and it is based that most musculoskeletal problems are caused by three-dimensional distortion of the fascia. Until now, some studies have been conducted to investigate the effect of FDM, but it is still not enough. In this study, among the six techniques of FDM, trigger band (TB) and cylinder distortion (CyD) were applied to the forearm to investigate the immediate effect on the maximal grip strength, force sense and range of motion. Methods : 22 healthy adults in their 20s and 30s participated. Before and after the application of FDM, maximal grip strength, force sense and range of motion were measured. For analysis, a paired t-test was performed, and the significance level was set to p<.05. Results : After FDM, there were a significant differences that increased the force sense and the range of motion (p<.05). But the maximal grip strength did not show a significant difference (p>.05). Conclusion : The results of this study, the FDM did not affect maximal grip strength, but it was shown to increase the sense of force and range of motion. We assumed that it is the result of the changes in the states of the fascia and changes in the activity of mechanical receptors induced by pressure and stretch from FDM application.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.72-78
• /
• 2015

According to the report of the WHO, workers have been exposed to much job strain such as job load, responsibility, role, interpersonal conflict etc. In Korea, studies on job strain started to become active from 1990s and now hundreds of studies are actively under going or publishing so that the studies are contributing to development and improvement of job strain. Representative measurement models of job strain are Job Strain Model of Karasek, Job Stress Model of NOISH, Korea Occupational Stress Scale, JSQ(Job Stress Questionnaire), K-OSI(Korea Version of Occupational Stress Inventory) etc. (Lee Kwan-Suk, 2012 ; KOSHA, 2003). Among them, Job Strain Model of Karasek had been loved by many researchers of job strain before Korea Occupational Stress Scale was developed. Job Strain Model of Karasek had been fitted to Korean style and then, used to analyze job strain of Korean people so that this Scale highly contributed to seeking relationship with cardiovascular disease, musculoskeletal disease caused by job, smoking, drug, alcohol poisoning, and pulse(Lee Kwan-Suk, 2012). But as this Model was studied and developed based on foreign culture and life pattern, a model fit to Korea was developed to measure job strain for Korean people, which is Korea Occupational Stress Scale now most frequently used in measuring job strain. Accordingly, after this study made questionnaire survey about same population using the two methods used most frequently in measuring job strain, the study investigated what features appeared, what correlations appear between two models, and comparatively analyzed characteristics each independent and dependent variable. Based on this, the study aimed to exactly express job strain of Korean people. The subjects of the study were a population of 233, and Karasek's Questionnaire and KOSS's Questionnaire were surveyed at the same time. The results were analyzed by statistical program to obtain significant difference between two models. Four particular groups were divided with Job Strain Model of Karasek and the four particular groups were measured with Korea Occupational Stress Scale. And job strain come from combination of two models was measured, with which new comparative analysis method was suggested.

• 재활간호학회지
• /
• 제12권1호
• /
• pp.5-15
• /
• 2009

Purpose: The purpose of this study was to explore the concept of deconditioning within the field of nursing allied health sciences. Method: The concept analysis method described by Walker and Avant(1995) was used. Critical attributes, antecedents, consequences, and empirical referents were identified. Also model, borderline, contrary and related cases were proposed. Results: The definition of concept 'deconditioning' was a decrease in the function of general system that occured after long periods of immobility and might be marked by frail upon return to normal conditions. The attributes of deconditioning were as follows; 1) the deconditioning was caused by lengthening of physical inactivity; 2) the deconditioning state was resulted by respiratory system, cardiovascular system, musculoskeletal system, hematologic system and generalized manifestation; 3) the deconditioning state could be reconditioned. 4) The reinforced functions by exercise could be compromised by physical inactivity. Conclusion: Deconditioning is important concept in nursing practice since it occurs commonly in any patients who lack physical activity for long time and affects many aspects of clinical outcomes, but it could be reversible by nurses' efforts.

• 국제물리치료학회지
• /
• 제2권2호
• /
• pp.274-280
• /
• 2011

This study was designed to analyze repetitive dorsiflexion and plantarflexion exercises in ankles have effects on the muscle tones of triceps, vastus medialis and gastrocnemius. 25 healthy woman volunteers(ankle dorsiflexion exercise group: 13, ankle plantarflexion exercise group: 12) participated in the two ankle exercise models, which have performed 3 times a week for 3 weeks. Myotonometer was used to measure the muscle tones of the triceps, vastus medialis, gastrocnemius muscles, and measurements were performed before and after the application of the each exercise model. Repeated measured paired t-test and independent t-test was used to determine a statistical significance. The group of repetitive dorsiflexion exercise of the ankle have effects on the muscle tones of triceps, vastus medialis and gastrocnemius (p>.05). The group of repetitive plantarflexion exercise of the ankle have effects on the muscle tones of triceps, vastus medialis and gastrocnemius(p>.05). The groups of repetitive dorsiflexion and plantarflexion exercise of the ankle have effects on the muscle tones of triceps, vastus medialis and gastrocnemius(p>.05).

• 대한인간공학회지
• /
• 제23권4호
• /
• pp.45-56
• /
• 2004

The purpose of this study is to evaluate perceived discomfort of working postures in terms of upper body (back, shoulder, and elbow) flexions when an external load varies. Eighteen subjects participated in an experiment of appraising perceived discomfort of varying upper body postures with three levels of external loads given. The ANOVA results showed that the perceived discomfort of upper body postures was significantly affected by the external load. It was also apparent that the interactions between external load and upper body posture were significant (p< 0.001). The result implies that a new posture classification scheme for workload assessment methods may be in need to reflect such interactions between external load and upper body posture. In order to support the statement, a regression model of perceived discomfort of upper body postures obtained from the experiment was developed and compared to that of perceived discomfort of seven work-related postures found in automobile assembly operations. The correlation coefficient between predicted and actual values of perceived discomfort was about 0.96. It is expected that the result help to properly estimate the body stress resluting from worker's postures and external loads and can be used as a valuable design guideline on preventing work-related musculoskeletal diseases in industry.

• Safety and Health at Work
• /
• 제8권2호
• /
• pp.206-211
• /
• 2017

Background: Self-reported low back pain (LBP) has been evaluated in relation to material handling lifting tasks, but little research has focused on relating quantifiable stressors to LBP at the individual level. The National Institute for Occupational Safety and Health (NIOSH) Composite Lifting Index (CLI) has been used to quantify stressors for lifting tasks. A chemical exposure can be readily used as an exposure metric or stressor for chemical risk assessment (RA). Defining and quantifying lifting nonchemical stressors and related adverse responses is more difficult. Stressor-response models appropriate for CLI and LBP associations do not easily fit in common chemical RA modeling techniques (e.g., Benchmark Dose methods), so different approaches were tried. Methods: This work used prospective data from 138 manufacturing workers to consider the linkage of the occupational stressor of material lifting to LBP. The final model used a Bayesian random threshold approach to estimate the probability of an increase in LBP as a threshold step function. Results: Using maximal and mean CLI values, a significant increase in the probability of LBP for values above 1.5 was found. Conclusion: A risk of LBP associated with CLI values > 1.5 existed in this worker population. The relevance for other populations requires further study.

• 대한기계학회논문집A
• /
• 제36권8호
• /
• pp.913-920
• /
• 2012

단층촬영 영상정보를 이용하여 근육, 연부조직 및 골 구조 등을 포함한 발의 상세한 유한요소해석모델을 개발하여 보행과정을 모사하였고, 발과 직접 접촉하는 신발밑창 형상의 고려 여부에 따른 보행 중의 발바닥 압력의 변화를 비선형 접촉해석으로 계산하였다. 해석결과 직립 정지상태나 보행 중에는 공통으로 뒤꿈치가 지면에 닿을 때 압력집중이 가장 높았으며, 편평한 밑창보다 발바닥 곡면과 같은 밑창을 사용한 보행해석에서 뒤꿈치의 압력집중이 덜하고 접촉면이 더 넓었다. 이러한 보행모델 및 해석은 발바닥의 압력집중에 취약한 당뇨병 환자 전용 의료보조신발(압력을 넓게 분포시켜 집중의 강도를 낮출 수 있는) 개발의 수단으로 활용될 수 있음을 보였다.