대한인간공학회지 (Journal of the Ergonomics Society of Korea)

  • 제24권3호
  • /
  • Pages.11-27
  • /
  • 2005
  • /
  • 1229-1684(pISSN)
  • /
  • 2093-8462(eISSN)
대한인간공학회 (Ergonomics Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

손목 자세와 외부 부하에 따른 손목 불편도 모델링

Modeling of Wrist Discomfort with External Loads

  • 최광수 (고려대학교 산업시스템정보공학과) ;
  • 박재규 (고려대학교 산업시스템정보공학과) ;
  • 정의승 (고려대학교 산업시스템정보공학과) ;
  • 최재호 (대진대학교 산업시스템공학과)
  • 발행 : 2005.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The objectives of this study are to analyze representative wrist postures while using hand tools and parts at general assembly processes, to evaluate perceived discomfort on the wrist when external loads are present, and to suggest an evaluation and prediction model of perceived discomfort. Sixteen subjects participated in an experiment to appraise perceived discomfort. Three types of the wrist postures with five levels of non-neutralities were analyzed when five levels of external load were applied to each posture. The ANOVA results showed that the perceived discomfort of wrist postures was significantly affected by both the wrist posture and external load (p$<$0.001). It was also shown that some of the interactions between external loads and the wrist postures(Flexion/$Extension^*$Load, Flexion/$Extension^*$supination/pronation, ulnar/radial $deviation^*$supination/pronation) were significant(p$<$0.001). The result implies that a new posture classification scheme for workload assessment methods may be needed to reflect such effects of external load and wrist posture. A regression model of perceived discomfort was developed with respect to wrist posture and external load from the experimental data. A subsequent experiment revealed that the correlation coefficient between the predicted values of perceived discomfort from the model and the actual values obtained from the experiment was about 0.98. It is expected that the results help to properly estimate the body stress resulting from worker's postures and external loads and can be used as a valuable design guideline to analyze potential hazard of musculoskeletal diseases in industry.

키워드

참고문헌

  1. 권오채, 윤명환, 반복적인 손목 및 손가락 작업에서의 수작업 부하평가, 대한인간공학회지, 18(2), 103-120, 1999
  2. 기도형, 인체 관절 동작의 지각 불편도에 근거한 상체의 자세 분류체계의 개발, 대한산업공학회지, 24(3), 447-456, 1998
  3. 기도형, 외부 부하, 상지 자세와 지속 시간에 따른 지각 불편도, 대한산업공학회지, 30(2), 76-83, 2004a
  4. 기도형, 외부 부하와 반복에 따른 팔 동작의 심물리학적 자세 부하, IE Interface, 17(2), 218-225, 2004b
  5. 노동부, 근골격계질환 예방업무 편람, [http://www.molab.go.kr/], 2004
  6. 노동부, 노동부 고시 제 2003-24호, 2003
  7. 박성준, 제약만족 알고리즘에 기초한 인간공학적 조종패널 배치시스템의 개발, 박사학위논문, 포항공대, 1995
  8. 박성현, 현대실험 계획법, 민영사, 2003
  9. 이인석, 정민근, 기도형, 김상호, 자동차 조립 작업에서의 전신 자세 불편도 예측 모델, 한국경영과학회, 대한산업공학회 공동학술대회 논문집, 792-796, 2002
  10. 이인석, 류형곤, 정민근, 기도형, 복합적인 몸통 자세의 심물리학적 불편도 평가, 대한산업공학회지, 27(4), 413-423, 2001
  11. 한국산업안전공단, 2003년도 산업재해분석, [http://www.kosha.net], 2003
  12. 현수돈, 이윤근, 임상혁, 박희석, 자동차 조립 공정에서 작업 특성에 따른 근골격계질환 증상호소율과 관련 요인 분석, 대한인간공학회 춘계학술대회 논문집, 2002
  13. American National Standards Institute, Control of the work-related cumulative trauma disorders, Part 1, Upper extreamities, ANSI N-365, 1996
  14. Armstrong, T. J., Upper-extremity postures; definition, measurement, measurement and control, in Corlett, E. N., Wilson, J. and Manenica, I. (Eds.), The ergonomics of working postures: Models, Methods and cases, Taylor and Francis, London, 59-73, 1986
  15. Bernard, B. (Ed.), Musculoskeletal disorders and workplace factors: A critical review of epidemiological evidence for work-related musculoskeletal disorders of the neck, upper exterimity, and lower back. DHHS(NIOSH) Publication, 97-141, US Department of Health and Human Services, 1997
  16. Cannon, L. J., Bernacki, E. J. and Walter, S. D., Personal Occupational Factors Associated with Carpal Tunnel Syndrome, J. Occupational Medicine, 23(4), 255-258, 1981
  17. Edril, M. and Dicson, O. B., Cumulative trauma disorders, preventive evaluation, and treatment, Van Nostrand Reinhold, 88-89, 1997
  18. Eilis, J., Carey and Timothy J. Gallwey, Wrist discomfort levels for combined movements at constant force and repetition rate, Ergonomics, 48(2), 171-186, 2005 https://doi.org/10.1080/00140130410001714760
  19. Genaidy, A. M., Al-shedi, A. A. and Karwowski, W., Postural stress analysis in industry. Applied Ergonomics, 25, 77-87, 1994 https://doi.org/10.1016/0003-6870(94)90068-X
  20. Genaidy, A. M., Guo, L., Exkart, R. and Tischbein, D., A postural stress analysis system for evaluating body movements and positions in industry, Proceedings of Ergonomics Society Conference, Edinburgh, Scotland, 346-351, 1993
  21. Gescheider, G. A., Psychophysics; Method, theory, and application(2nd ed), Lawrence Erlbaum Associates, Hillsdule, New Jersey, 1985
  22. Han, S. H., Jung, E. S., Kwahk, J. and Park, S., Psychophysicaal methods and passenger preferences of interior designs, Applied Ergonomics, 29(6), 499-506, 1998 https://doi.org/10.1016/S0003-6870(97)00009-4
  23. Han, S. H., Song, M. K. and Kwahk, J. Y., A systemetic method for analyzing magnitude estimation data, International Journal of Industrial Ergonomics, 23, 513-524, 1999 https://doi.org/10.1016/S0169-8141(98)00017-1
  24. Hignett, S. and McAtamney, L., Rapid Entire Body Assessment(REBA), Applied Ergonimics, 31, 201-205, 2000 https://doi.org/10.1016/S0003-6870(99)00039-3
  25. Hwang, C. L. and Yoon, K., Multiple Attribute Decision Making: Method and Application, Spring-Verlag, New York. 1981
  26. Ketola, R., Toivonen, R. and Viikari-juntura, E., Interobserver repeatability and validity of an observation method to asses physical loads imposed on the upper extremities, Ergonomics, 44(2), 119-131, 2001 https://doi.org/10.1080/00140130118669
  27. Li, G. and Buckle, P., Current techniques for assessing physical exposure to work-related musculoskeletal risks, with emphasis on posture-based methods. Ergonomics, 42, 674-695, 1999 https://doi.org/10.1080/001401399185388
  28. McAtamney, L. and Corlett, E. N., RULA: a survey method for the investigation of work-related upper limb disorders, Applied Ergonomics, 24(2), 91-99, 1993 https://doi.org/10.1016/0003-6870(93)90080-S
  29. Mital, A. and Kilbom, A., Design, selection and use of hand tools to alleviate trauma of the upper extremities: Part II The scientific basis (knowledge base) for the guide, International J. Ind. Ergonomics, 10, 7-21, 1992 https://doi.org/10.1016/0169-8141(92)90043-Y
  30. Moore, J. S. and Garg, A., Upper extremity disorders in a pork processing plant: Relationship between jop risk factors and morbidity, American Industrial Hygiene Association Journal, 55, 703-715, 1994 https://doi.org/10.1080/15428119491018592
  31. Myers, R. H., Response Surface Methodology, Blacksburg, Virginia, Virginia Polytechnic Institute and State University 1976
  32. NIOSH, Musculoskeletal disorders and workplace factor - A critical review of epidemiologic evidence for work-related musculoskeletal disorders of neck, upper extremity, and low back, Control and Prevention, 1997
  33. Putz-Anderson, Vern., Cumulative Trauma disorders: A Manual for Musculoskeletal Diseases of the Upper Limbs, Taylor and Francis, New York, 1988
  34. Radwin, R. G. and Lin, M. L., An analytical method for characterizing repetitive motion and postural stress using spectral analysis, Ergonomics, 36(4), 379-389, 1993 https://doi.org/10.1080/00140139308967895
  35. Radwin, R. G., Lin, M. L. and Yen, T. Y., Exposure assessment of biomechanical stress in repetitive manual work using frequency-weighted filters, Ergonomics, 37(12), 1984-1998, 1994 https://doi.org/10.1080/00140139408964962
  36. Rohmert, W., Problems of determination of rest allowances, part 2: determining rest allowances in different human tasks. Applied Ergonomics, 4(3), 158-162, 1973 https://doi.org/10.1016/0003-6870(73)90166-X
  37. The Bureau of Labor Statistics, [http://www.bls.gov], 2004
  38. Winkel, J. and Mathiassen, S. E., Assessment of physical work load in epidemiologic studies: Concepts, issues and operational considerations. Ergonomics, 37, 979-988, 1994 https://doi.org/10.1080/00140139408963711
  39. Williges, R. C., Development and Use of Research Methodologies for Complex System/Simulation Experimentation, In M. J. Moral and K. F Kraiss, Manned System Design, Plenum Press: New York, 1981
  40. Yun, M. H., A hand posture measurement system for the analysis of manual tool handling tasks, Unpublished Ph. D. Thesis, Department of Industrial and Manufacturing Systems Engineering, Pennsylvania State University, 1994

피인용 문헌

  1. Effects of Combinational Posture of Shoulder, Elbow and Wrist on Grip Strength and Muscle Activity vol.31, pp.4, 2016, https://doi.org/10.14346/JKOSOS.2016.31.4.111