• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.448-453
• /
• 2005

For under-water communication system, due to limit of bandwidth and reflect of under-water wave, it is difficult to implement high-reliability high-speed digital communication system. To apply high-reliability and high-speed communication system for under-water system, the efficient combine the channel design with the use of multiple transmit and/or receive antennas. Therefore this paper analyze the space time coded system for under-water communication environment.

• Journal of Digital Contents Society
• /
• v.5 no.4
• /
• pp.264-268
• /
• 2004

MIMO(Multi-Input Multi-Output)) system, which can increase the channel capacity by in multiple transmit and/or receive antennas, has been intensively studied for higher data rates and better quality in wireless communications. This paper treats the MIMO channel modeling and analyze the performance of V-BLAST system with ZF receiver and MMSE reciver, using OSUS algorithm respectively, over MIMO channel.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.141-148
• /
• 2009

Space-time block codes (STBC) have no coding gain but they provide a full diversity gain with relatively low encoder/decoder complexity. Therefore, STBC should be concatenated with an outer code which provides an additional coding gain. In this paper, we consider the concatenation of multiple trellis-coded modulation (MTCM) codes with STBC for achieving significant coding gain with full antenna diversity. Using criteria of equal transmit power, spectral efficiency and the number of trellis states, the performance of concatenated scheme is compared to that of previously known space-time trellis codes (STTC) in terms of frame error rate (FER). Simulation results show that MTCM codes concatenated with STBC offer better performance on fast Rayleigh fading channels, than previously known STTC with two transmit antennas and one receive antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3A
• /
• pp.223-231
• /
• 2011

It has been shown that the performance of multiple-input multiple-output (MIMO) spatial multiplexing systems is significantly degraded when spatial correlation exists between transmit and receive antenna pairs. In this paper, we investigate designs of a new statistical precoder for spatial multiplexing systems with maximum likelihood (ML) receiver which requires only correlation statistics at the transmitter. Two kinds of closed-form solution precoders based on rotation and power allocation are proposed by means of maximizing the minimum E tlidean distance of joint symbol constellations. In addition, we extend our results to linear receivers for correlated channels. We provide a method which yields the same profits from the proposed precoders based on a simple zero-forcing (ZF) receiver. The simulation shows that 2dB and 8dB gains are achieved for ML and ZF systems with two transmit antennas, respectively, compared to the conventional systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1050-1060
• /
• 2009

In this paper, a X-Band T/R-module for SAR(Synthetic Aperture Radar) systems based on active phased array antennas is designed and fabricated. The T/R modules have a and width of more than 800 MHz centered at X-Band and support dual, switched polarizations. The output power of the module is 7 watts over a wide bandwidth. The noise figure is as low as 3.9 dB. Phase and amplitude are controlled by a 6-bit phase shifter and a 6-bit digital attenuator, respectively. Further the fabricated T/R module has est and calibration port with directional coupler and power divider. Highly integrated T/R module is achieved by using LTCC(Low Temperature Co-fired Ceramic) multiple layer substrate. RMS gain error is less than 0.8 dB max. in Rx mode, and RMS phase error is less than $4^{\circ}$ max. in Rx/Tx phase under all operating frequency band, or the T/R module meet the required electrical performance m test. This structure an be applied to active phase array SAR Antennas.

• Journal of electromagnetic engineering and science
• /
• v.18 no.2
• /
• pp.78-87
• /
• 2018

This paper describes specular reflectance measurements of dielectric plates in three waveguide frequency bands: D-band (110-170 GHz), G-band (140-220 GHz), and J-band (220-325 GHz). The transmit (Tx) part of the proposed specular reflectance measurement system is stationary, while the receive (Rx) part and the material under test (MUT) holder are concentric-rotating with a 2:1 speed ratio for specular reflectance measurements. In specular reflectance measurements, the first step measures the specular reflection coefficients of an MUT and a metal plate on the MUT holder located at the center of the Tx and Rx parts, and the second step calculates the specular reflectance defined by the specular reflection power (i.e., intensity) of the MUT normalized to that of the metal plate. Multiple reflection effects between the Tx and Rx antennas and the MUT on the measured specular reflectance are minimized by averaging out the multiple specular reflectances measured with changing the separation distance between the two antennas by ${\lambda}/8$ intervals. Measurement results of the perpendicular-polarized specular reflectance of commonly used dielectric plates are verified by comparing those with the analytic results and show that the results measured over the overlapped frequency range of the D-/G-bands and at the boundary frequency of the G-/J-bands agree well with the results for the other band, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.2831-2847
• /
• 2017

In this paper, a joint destination-relay selection and antenna mode selection scheme for full-duplex (FD) relay network is investigated, which consists of one source node, N FD amplify-and-forward (AF) relays and M destination nodes. Multiple antennas are configured at the source node, and beamforming technique is adopted. Two antennas are employed at each relay, one for receiving and the other for transmitting. Only one antenna is equipped at each destination node. In the proposed scheme, the best destination node is firstly selected according to the direct links between the source node and destination nodes. Then the transmit and receive mode of two antennas at each relay is adaptively selected based on the relaying link condition. Meanwhile, the best relay with the optimal Tx/Rx antenna configuration is selected to forward the signals. To characterize the performance of the proposed scheme, the closed-form expression of the outage probability is derived; meanwhile, the simple asymptotic expressions are also obtained. Our analysis shows that the proposed scheme obtains the benefits of multi-relay diversity and multi-destination diversity. Moreover, extra space diversity in the medium SNR region can be achieved due to the antenna selection at the relay. Finally, Monte-Carlo simulations are provided to consolidate the analytical results, and show the effectiveness of the proposed scheme.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.55-62
• /
• 2019

In this paper, we consider K-user multiple-input multiple-output (MIMO) interference channel and present a transceiver design for simultaneous wireless information and power transfer (SWIPT) systems. In addition, we consider a SWIPT system where an information decoding receiver and an energy harvesting receiver are co-located at the same receiver. In the proposed scheme, signal-to-leakage plus noise ratio (SLNR) is used as a cost function and a transceiver is designed to satisfy the threshold of the harvested energy. More specifically, transmitter precoding vector, receiver filter vector, and power spitting factor are simultaneously designed to maximize SLNR with a constraint on the harvested energy. Through computer simulation, we compare the signal-to-interference plus noise ratio (SINR) performance of the proposed and conventional schemes. When a special condition among the number of transmit antennas, receive antennas, and users is satisfied, the proposed scheme showed better SINR performance than the conventional scheme at low signal-to-noise ratio (SNR) range. Also, when the condition is not satisfied, the proposed scheme showed better performance than the conventional scheme at all SNR range.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.53-59
• /
• 2009

In multi-user MIMO systems, a base station transmits multiple data to multi-user simultaneously in order to improve performance and bandwidth efficiency. When the base station transmits multiple data to multi-user simultaneously, multi-user interference occurs severely. In this paper, we define a post-processing leakage as the total power leaked from desired user to all other users after combining at the output of each user. Using concept of the post-processing leakage, we also define a performance metric, the so called signal-to-post-processing-leakage-plus-noise ratio (SPPLNR). Assuming that the receiver is the minimum mean square error (MMSE) receiver, we propose an iterative SPPLNR-based beamforming that determines beamforming vectors and combining vectors by using an iterative method. The proposed scheme does not impose a condition on the relation between the number of transmit antennas for the base station and the number of receive antennas for users. Simulation results show that the proposed scheme outperforms a beamforming scheme perfectly eliminating the multi-user interference when channel estimation error exists.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.45-52
• /
• 2008

In typical cellular systems using frequency reuse scheme, the terminal suffers a performance degradation due to the intercell interference signals from adjacent cells as the terminal moves toward the cell boundary. In this paper, a signal transmission and reception scheme which achieve spatial multiplexing and beamforming gain from a distributed MIMO (multiple-input multiple-output) channel using multiple-antenna terminal is proposed for the spectral efficiency enhancement in a multi-cell downlink environment, when geographically separated base stations cooperatively transmit signals. In particular, we analyze the effective signal-to-interference ratio and spectral efficiency of the proposed scheme for different frequency reuse patterns and for varying numbers of receive antennas, and compare with the performance of the MRC (maximal ratio combining) reception scheme in typical cellular systems. We evaluate the amount of transmission efficiency of the scheme by comparing the performance near the cell boundary where the strong intercell interference is experienced.