• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.3
• /
• pp.226-235
• /
• 2023

This study aimed to supplement the shortcomings of the Multiple-sensor-based Frost Observation System (MFOS). The developed frost observation system is an improvement of the existing system. Based on the leaf wetness sensor (LWS), it not only detects frost but also functions to predict surface temperature, which is a major factor in frost occurrence. With the existing observation system, 1) it is difficult to observe ice (frost) formation on the surface when capturing an image of the LWS with an RGB camera because the surface of the sensor reflects most visible light, 2) images captured using the RGB camera before and after sunrise are dark, and 3) the thermal infrared camera only shows the relative high and low temperature. To identify the ice (frost) generated on the surface of the LWS, a LWS that was painted black and three sheets of glass at the same height to be used as an auxiliary tool to check the occurrence of ice (frost) were installed. For RGB camera shooting before and after sunrise, synchronous LED lighting was installed so the power turns on/off according to the camera shooting time. The existing thermal infrared camera, which could only assess the relative temperature (high or low), was improved to extract the temperature value per pixel, and a comparison with the surface temperature sensor installed by the National Institute of Meteorological Sciences (NIMS) was performed to verify its accuracy. As a result of installing and operating the MFOS v2, which reflects these improvements, the accuracy and efficiency of automatic frost observation were demonstrated to be improved, and the usefulness of the data as input data for the frost prediction model was enhanced.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.11
• /
• pp.1012-1019
• /
• 2015

This paper shows the acceleration of iterative physical optics(IPO) for radar cross section(RCS) by using two techniques effectively. For the analysis of the multiple reflection in the cavity, IPO uses the near field method, unlike shooting and bouncing rays method which uses the geometric optics(GO). However, it is still far slower than physical optics(PO) and it is needed to accelerate the speed of IPO for practical purpose. In order to address this problem, graphic processing unit(GPU) can be applied to reduce calculation time and adaptive iterative physical optics-change rate(AIPO-CR) method is also applicable effectively to optimize iteration for acceleration of calculation.

• Journal of Internet of Things and Convergence
• /
• v.6 no.2
• /
• pp.37-43
• /
• 2020

The paper proposed the method of calculating the latest approach angle that can reliably recognize multiple laser images even with the change in separation distance between screen and laser launch device. This method recognizes the angle of the laser pattern angle by using the distance of the laser pattern angle, and the angle extraction of the laser detects the laser image from the acquired image using the labeling algorithm, and performs the huff conversion to extract the angle of the straight line. The distance of the reference angle and angle of the laser image extracted using Euclidean distance among similarity scales is calculated, and the furnace is recognized using the calculated distance result value. Experiments with changing the separation distance to "200 cm to 400 cm" showed 100% recognition of individual strands at all separation distances. The experiment confirmed the reliability of the proposed method.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.112.1-112.1
• /
• 2010

To develop domestic IGCC gasification technology, a gasification test bed with a capacity of 20 tons/day has been designed. The main components of the test bed designed are a coal pulverizing and feeding facility, a gasifier, a syngas cooler, a gas treatment unit, oxygen and nitrogen tanks, and flare stack. For wide applications to the development of advanced coal gasification technology, many special functions have been given to it such as syngas recirculation, char recirculation, and multiple stage gasification. The test bed will be used for testing the characteristics of various types of coals, deriving optimum conditions for efficient gasifier operation and trouble shooting for the Korea IGCC demonstration plant. It will also be applied as a useful tool to develop scale-up design technology of IGCC and proceed to commercialization.

• ETRI Journal
• /
• v.30 no.1
• /
• pp.81-88
• /
• 2008

The security threat posed by worms has steadily increased in recent years. This paper discusses the application of the optimal and sub-optimal Internet worm control via Pontryagin's maximum principle. To this end, a control variable representing the optimal treatment strategy for infectious hosts is introduced into the two-factor worm model. The numerical optimal control laws are implemented by the multiple shooting method and the sub-optimal solution is computed using genetic algorithms. Simulation results demonstrate the effectiveness of the proposed optimal and sub-optimal strategies. It also provides a theoretical interpretation of the practical experience that the maximum implementation of treatment in the early stage is critically important in controlling outbreaks of Internet worms. Furthermore, our results show that the proposed sub-optimal control can lead to performance close to the optimal control, but with much simpler strategies for long periods of time in practical use.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.05a
• /
• pp.445-446
• /
• 2018

최근 무인항공기 (Unmanned Aerial Vehicle, UAV)에 장착한 카메라를 활용하여 사용자의 눈높이가 아닌 새로운 시각에서 사용자를 촬영한 영상을 제공한다. 사용자를 추적하며 촬영하기 위해 저전력 블루투스 (Bluetooth Low Energy, BLE) 신호, 영상, 그리고 Natural User Interface/Natual User Experience(NUI/NUX) 기술을 활용한다. BLE 신호로 사용자를 추적하는 경우 사용자의 후방에서 추적하며 사용자만을 추적하며 촬영 가능한 문제가 있다. 하지만 복수의 사용자를 전방에서 추적하며 촬영하는 방법이 필요하다. 본 논문에서는 복수의 사용자를 추적하며 전방에서 촬영하기 위해 UAV의 비행방향을 결정하는 방법을 설명한다. 복수의 사용자로부터 측정 가능한 BLE 신호들을 UAV에서 측정한다. 복수개의 BLE 신호의 변화를 활용하여 UAV의 비행방향을 결정한다.

• Horticultural Science & Technology
• /
• v.16 no.2
• /
• pp.239-241
• /
• 1998

The experiments were carried out to improve culture efficiency of rhizome and mericlone propagation through settlement of problems occurring during culture period of temperate Cymbidium species. Shooting efficiency from rhizome of C. forrestii 'Nokwoon' was improved, when cultured in $H_3P_4$ medium (Hyponex 3+peptone 4g/L) supplemented with 170mg/L $NaH_2PO_4{\cdot}H_2O$ and 0.4mg/L Thiamin e HCl, but the other varieties were not influenced to shooting efficiency by additives. Medium in which rhizome of C. nishiuchianum 'Hodukjiwha' was cultured became less browned in $H_3P_4$ medium added with 150mg/L PVP, but the other treatments of antioxidants was failed to prevent the medium browning. Re-formation of rhizome from young shoots of C. forrestii 'Sojub', 5.5cm in length occured in $H_3P_4$ enriched with 2.0 mg/L NAA and 1.0 mg/L BA under darkness, but axillary buds were elongated in the medium with 1.0 mg/L NAA and 3.0 mg/L BA under light condition. On the other hand, rhizomes from young shoot of C. forrestii 'Seosinmae' and 'Songmae', 5.5cm and 2.5cm in length respectively were reformed in 2.0 mg/L NAA and 5.0mg/L kinetin under darkness, but multishoot from young shoot were emerged in 2.0mg/L NAA and 3.0mg/L BA.

• Korean Journal of Medicinal Crop Science
• /
• v.1 no.1
• /
• pp.63-69
• /
• 1993

Present experiment were attempted to examine in vitro multiplication throughbud culture of Cornus officinalis. Bud derived shoot formation was established successfully on Murashige and Skoog's medium supplemented with $0.5mg\;/\;{\ell}$ BAP(N-benzyl amino purine). The shoot proliferation increased on the Driver Kuniyuki Walnut medium containing $0.5mg\;/\;{\ell}$ NAA(Napthalene acetic acid) and $0.5mg\;/\;{\ell}$ BAP. Addition of 2,4-D(2,4-Dichlorophenoxy acetic acid) to the media produced excessive callus inducton. IAA(Indole-3-acetic acid) and IBA (Indole-3-bu-tyric acid) enhanced multple shooting, and NAA showed callus induction and multiple shooting. Shoot growth was enhanced supplemented with 3% sucrose, $2g\;/\;{\ell}$ activated charcoal, and 1 / 4MS in organic salts. However, root formation of proliferated shoots was low about 5%

• Journal of Plant Biotechnology
• /
• v.31 no.1
• /
• pp.49-53
• /
• 2004

Shoot formation was investigated from in vitro cultivation of exotic hybrid poplar (Populus koreana ${\times}$ P. trichocarpa) with a specific stomatal character occurring both upper and lower surface of leaves. Two different explants (stem and leaf segment) of Peace poplar were cultured on half strength Murashige and Skoog (MS) basal medium supplemented with the various concentrations of thidiazuron as a plant growth regulator. Most adventitious shoots were produced from excised ends of stem or mid-veins of leaf segments. The highest average numbers of shoots were 7.1 and 5.3 with the treatments of 0.02mg/L TDZ in both explants of stem and leaf segment. The highest shooting rates were achieved to 83.3％ and 47.6％ with the concentrations of 0.01mg/L and 0.02mg/L TDZ by axillary bud and leaf cultures, respectively.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.144-149
• /
• 2008

This study is aim to execute multiple analysis about housing plan to target middle old aged households. This results can be applied to an important information for housing plan of middle old aged households to search about how does housing plan realized through their consciousness, satisfactions and selection preference of housing. The detailed purpose of this study is stated in below. First, this study shows specific attributes of middle old aged households. Second, this study shows the consciousness of middle old aged households for housing. Third, this study shows the preferences of middle old aged households for housing. Forth, this study also shows the upcoming housing plans through the consideration of their consciousness and preferences for housing selection. All data of this study was achieved through questionnaire survey, personal interview and photo shooting. Totally three hundred seventy copies were used for final analysis to target middle aged people after forties in Ulsan. The questionnaires in this survey were consisted of 5 major items such as the attributes of social demography, housing values, preferences, satisfactions related to results of consciousness and housing choices.