• Journal of Advanced Marine Engineering and Technology
• /
• 제30권8호
• /
• pp.919-926
• /
• 2006

To move in unknown or uncertain environment, a mobile robot must collect informations from various sensors and use it to construct a representation of the external world. Ultrasonic sensor can provide range data for this purpose in a simple cost-effective way. However conventional ultrasonic sensor system for a mobile robot are not sufficient for environment recognition because of their large beam opening angle, specular reflection. This paper describe on environmental perception algorithm which can solve these problems in case using ultrasonic sensor. The algorithm consist of two parts. One is to solve beam opening angle problem by fusion from multiple ultrasonic sensors. The other is to cope with specular reflection problem in wall line extract, which is based on Hough Transform. Experiments to verify the validity of the proposed algorithm are carried out, and the results are provided at last part in this paper.

• ETRI Journal
• /
• 제33권3호
• /
• pp.310-319
• /
• 2011

In this paper, a new soft-fusion approach for multiple-receiver wireless communication systems is proposed. In the proposed approach, each individual receiver provides the central receiver with a confidence level rather than a binary decision. The confidence levels associated with the local receiver are modeled by means of soft-membership functions. The proposed approach can be applied to wireless digital communication systems, such as amplitude shift keying, frequency shift keying, phase shift keying, multi-carrier code division multiple access, and multiple inputs multiple outputs sensor networks. The performance of the proposed approach is evaluated and compared to the performance of the optimal diversity, majority voting, optimal partial decision, and selection diversity in case of binary noncoherent frequency shift keying on a Rayleigh faded additive white Gaussian noise channel. It is shown that the proposed approach achieves considerable performance improvement over optimal partial decision, majority voting, and selection diversity. It is also shown that the proposed approach achieves a performance comparable to the optimal diversity scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권1호
• /
• pp.229-240
• /
• 2012

Advances in MEMS and CMOS technologies have motivated the development of low cost/power sensors and wireless multimedia sensor networks (WMSN). The WMSNs were created to ubiquitously harvest multimedia content. Such networks have allowed researchers and engineers to glimpse at new Machine-to-Machine (M2M) Systems, such as remote monitoring of biosignals for telemedicine networks. These systems require the acquisition of a large number of data streams that are simultaneously generated by multiple distributed devices. This paradigm of data generation and transmission is known as event-streaming. In order to be useful to the application, the collected data requires a preprocessing called data fusion, which entails the temporal alignment task of multimedia data. A practical way to perform this task is in a centralized manner, assuming that the network nodes only function as collector entities. However, by following this scheme, a considerable amount of redundant information is transmitted to the central entity. To decrease such redundancy, data fusion must be performed in a collaborative way. In this paper, we propose a collaborative data alignment approach for event-streaming. Our approach identifies temporal relationships by translating temporal dependencies based on a timeline to causal dependencies of the media involved.

• 지능정보연구
• /
• 제15권1호
• /
• pp.51-64
• /
• 2009

다중센서를 이용한 기동물체의 추적은 GPS, INS, 레이더 및 광학장비 등의 위치추적 센서가 이용되며, 이러한 시스템은 UAV, 유도미사일, 우주선 등의 추적 탐지 통제를 위해 사용된다. 기동물체의 위치추적과 관련한 대부분의 연구는 다수의 레이더를 융합하거나 INS, GPS에 보조센서 추가하는 것이다. 하지만 이기종의 센서는 각 시스템특성 및 오차특성이 상이하므로 융합 간에 이를 고려하여 반영강도를 달리하는 연구가 필요하다. 본 논문에서는 다중센서 융합에 의한 추적 성능 향상을 위해 GPS, INS에 지상 레이더를 추가하여 각 센서특성에 따른 오차분석을 실시하고, 융합 간 오차특성에 따라 각 센서의 Sensor Probability를 변화시켜 정밀도와 안정성을 향상시키는 추적 알고리즘을 제안한다. 평가를 위해 UAV의 기동모델에 대한 시뮬레이션을 통해 고도값을 추출하고 제안 알고리즘을 적용하여 성능분석을 실시한다. 연구를 통해 각 센서의 항법정보 융합 간에 오차정도에 따라 측정치의 반영강도를 변화시켜 항법정보의 정확도 향상과 외부의 고의적인 환경변화 및 교란에도 강인한 추적이 가능하다.

• Smart Structures and Systems
• /
• 제24권6호
• /
• pp.693-707
• /
• 2019

This paper proposes an integrated safety assessment method that can take multiple sources data into consideration based on a data fusion approach. Data cleaning using the Kalman filter method (KF) was conducted first for monitoring data from each sensor. The inclination data from the four tilt sensors of the same monitoring section have been associated to synchronize in time. Secondly, the finite element method (FEM) model was established to physically correlate the external forces with various structural responses of the shield tunnel, including the measured inclination. Response surface method (RSM) was adopted to express the relationship between external forces and the structural responses. Then, the external forces were updated based on the in situ monitoring data from tilt sensors using the extended Kalman filter method (EKF). Finally, mechanics parameters of the tunnel lining were estimated based on the updated data to make an integrated safety assessment. An application example of the proposed method was presented for an urban tunnel during a nearby deep excavation with multiple source monitoring plans. The change of tunnel convergence, bolt stress and segment internal forces can also be calculated based on the real time deformation monitoring of the shield tunnel. The proposed method was verified by predicting the data using the other three sensors in the same section. The correlation among different monitoring data has been discussed before the conclusion was drawn.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.679-684
• /
• 1993

This article presents an approach to estimate the general 3D motion of a polyhedral object using multiple, sensory data some of which may not provide sufficient information for the estimation of object motion. Motion can be estimated continuously from each sensor through the analysis of the instantaneous state of an object. We have introduced a method based on Moore-Penrose pseudo-inverse theory to estimate the instantaneous state of an object. A linear feedback estimation algorithm is discussed to estimate the object 3D motion. Then, the motion estimated from each sensor is fused to provide more accurate and reliable information about the motion of an unknown object. The techniques of multisensor data fusion can be categorized into three methods: averaging, decision, and guiding. We present a fusion algorithm which combines averaging and decision.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.22-28
• /
• 1992

The need for intelligent systems that can operate in an unstructured, dynamic environment has created a growing demand for the use of multiple, distributed sensors. While most research in multisensor fusion has revolved around applications in object recognition-including military applications for automatic target recognition-developments in microsensor technology are encouraging more research in affordable, highly-redundant sensor networks. Three trends that are described at length are the increasing use of microsensors, the techniques that are used in the handling of partial or uncertain data, and the application of neural network techniques for sensor fusion.

• International Journal of Ocean System Engineering
• /
• 제1권2호
• /
• pp.102-109
• /
• 2011

This paper describes the implementation of a precise underwater navigation solution using a multiple sensor fusion technique based on USBL, GPS, DVL and AHRS measurements for the operation of a remotely operated mine disposal vehicle (MDV). The estimation of accurate 6DOF positions and attitudes is the key factor in executing dangerous and complicated missions. To implement the precise underwater navigation, two strategies are chosen in this paper. Firstly, the sensor frame alignment to the body frame is conducted to enhance the performance of a standalone dead-reckoning algorithm. Secondly, absolute position data measured by USBL is fused to prevent cumulative integration error. The heading alignment error is identified by comparing the measured absolute positions with the DR algorithm results. The performance of the developed approach is evaluated with the experimental data acquired by MDV in the South-sea trial.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1767-1768
• /
• 2007

This paper represents a map building system of Embedded Linux mobile robot. We propose a localization method which uses multiple sensors such as indoor GPS and encoder sensor for simultaneous map building system. In this paper we proposed a multiple sensor system for SLAM. For this, we developed a sensor based navigation algorithm and grid based map building algorithm under the Embedded Linux O.S. We proved this system's validity through field test

• 제어로봇시스템학회논문지
• /
• 제21권1호
• /
• pp.7-13
• /
• 2015

Unmanned air vehicles (UAVs) are getting popular not only as a private usage for the aerial photograph but military usage for the surveillance, reconnaissance and supply missions. For an UAV to successfully achieve these kind of missions, geolocation (localization) must be implied to track an interested target or fly by reference. In this research, we adopted multi-sensor fusion (MSF) algorithm to increase the accuracy of the geolocation and verified the algorithm using two multicopter UAVs. One UAV is equipped with an optical camera, and another UAV is equipped with an optical camera and a laser range finder. Throughout the experiment, we have obtained measurements about a fixed ground target and estimated the target position by a series of coordinate transformations and sequential Kalman filter. The result showed that the MSF has better performance in estimating target location than the case of using single sensor. Moreover, the experimental result implied that multi-sensor geolocation algorithm is able to have further improvements in localization accuracy and feasibility of other complicated applications such as moving target tracking and multiple target tracking.