• 제목/요약/키워드: multiple resistance

검색결과 741건 처리시간 0.035초

Research of Diffusion Bonding of Tungsten/Copper and Their Properties under High Heat Flux

  • Li, Jun;Yang, Jianfeng
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2011년도 춘계학술발표대회
    • /
    • pp.14-14
    • /
    • 2011
  • W (tungsten)-alloys will be the most promising plasma facing armor materials in highly loaded plasma interactive components of the next step fusion reactors due to its high melting point, high sputtering resistance and low deuterium/tritium retention. The bonding technology of tungsten to Cu alloy was one of the key issues. In this paper, W/CuCrZr diffusion bonding has been performed successfully by inserting pure metal interlay. The joint microstructure, interfacial elements migration and phase composition were analyzed by SEM, EDS, XRD, and the joint shear strength and micro-hardness were investigated. The mock-ups were fabricated successfully with diffusion bonding and the cladding technology respectively, and the high heat flux test and thermal fatigue test were carried out under actively cooling condition. When Ni foil was used for the bonding of tungsten to CuCrZr, two reaction layers, Ni4W and Ni(W) layer, appeared between the tungsten and Ni interlayer with the optimized condition. Even though Ni4W is hard and brittle, and the strength of the joint was oppositely increased (217 MPa) due primarily to extremely small thicknesses (2~3 ${\mu}m$). When Ti foil was selected as the interlayer, the Ti foil diffused quickly with Cu and was transformed into liquid phase at $1,000^{\circ}C$. Almost all of the liquid was extruded out of the interface zone under bonding pressure, and an extremely thin residual layer (1~2 ${\mu}m$) of the liquid phase was retained between the tungsten and CuCrZr, which shear strength exceeded 160 MPa. When Ni/Ti/Ni multiple interlayers were used for bonding of tungsten to CuCrZr, a large number of intermetallic compound ($Ni_4W/NiTi_2/NiTi/Ni_3T$) were formed for the interdiffusion among W, Ni and Ti. Therefore, the shear strength of the joint was low and just about 85 MPa. The residual stresses in the clad samples with flat, arc, rectangle and trapezoid interface were estimated by Finite Element Analysis. The simulation results show that the flat clad sample was subjected maximum residual stress at the edge of the interface, which could be cracked at the edge and propagated along the interface. As for the rectangle and trapezoid interface, the residual stresses of the interface were lower than that of the flat interface, and the interface of the arc clad sample have lowest residual stress and all of the residual stress with arc interface were divided into different grooved zones, so the probabilities of cracking and propagation were lower than other interfaces. The residual stresses of the mock-ups under high heat flux of 10 $MW/m^2$ were estimated by Finite Element Analysis. The tungsten of the flat interfaces was subjected to tensile stresses (positive $S_x$), and the CuCrZr was subjected to compressive stresses (negative $S_x$). If the interface have a little microcrack, the tungsten of joint was more liable to propagate than the CuCrZr due to the brittle of the tungsten. However, when the flat interface was substituted by arc interfaces, the periodical residual stresses in the joining region were either released or formed a stress field prohibiting the growth or nucleation of the interfacial cracks. Thermal fatigue tests were performed on the mock-ups of flat and arc interface under the heat flux of 10 $MW/m^2$ with the cooling water velocity of 10 m/s. After thermal cycle experiments, a large number of microcracks appeared at the tungsten substrate due to large radial tensile stress on the flat mock-up. The defects would largely affect the heat transfer capability and the structure reliability of the mock-up. As for the arc mock-up, even though some microcracks were found at the interface of the regions, all microcracks with arc interface were divided into different arc-grooved zones, so the propagation of microcracks is difficult.

  • PDF

Development of dry milling suitable rice cultivar to invigorate rice processing products

  • Jeung, Ji-Ung
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.10-10
    • /
    • 2017
  • Rice consumption has been continuously decreasing as the eating habits of Koreans have become westernized and diversified. The per capita annual rice consumption in Korea has dropped sharply from 136.4 kg in 1970 to 61.9 kg in 2016. The Korean government, therefore, has been trying to promote rice consumption by invigorating the processed food industry using rice flour. To facilitate the market for processed rice foods, it is essential to develop proper milling technology in terms of flour particle size and damaged starch content to produce high quality rice flour at competitive cost. Dry milling and wet milling are the two major processes used to produce rice flour. Although the dry milling process is relatively simple with a lower production cost, damaged starch content increases because of the high grain hardness of rice. In wet milling, the quality of rice flour is improved by reducing flour particle size as well as damaged starch content through soaking procedures. However, the production costs are high because of the additional expenses associated with the disposal of waste water, sterilization and drying of the wet flour. Recently developed technologies such as jet milling and cryogenic milling also require expensive investment and production. Therefore, developing new rice cultivars with dry milling adaptability as well as good processing properties is an important goal of rice breeding in Korea. 'Suweon 542' is a floury endosperm mutant line derived from sodium azide treatment on a high-yield, early maturing, and non-glutinous japonica rice cultivar, 'Namil'. Compared with the wild type, after dry milling process, the grain hardness of 'Suweon 542' was significantly lower because of its round and loosely packed starch granules. Also, the flour of 'Suweon 542' had significantly smaller particles and less damaged starch than 'Namil' and other rice cultivars and its particle size distribution was similar to a commercial wheat cultivar. Recently, through collaborations with nine universities and food companies, a total of 21 kinds of processed prototypes, using the dry milling flour of 'Suweon 542', were evaluated. In the production of major rice processing products, there was no significant quality difference between the flours prepared by wet milling and dry milling. Although the amount of water added to the dough was slightly increased, it was confirmed that the recipe applying the wet flour could be used without significant change. To efficiently transfer the floury endosperm characteristics of 'Suweon 542' to other commercial rice cultivars, it is essential to develop DNA marker tightly linked to the target gene. Association analysis using 70 genome-wide SSR markers and 94 F2 plants derived from 'Suweon 542'/'Milyang 23' showed that markers on chromosome 5 explained a large portion of the variation in floury grains percentage (FGP). Further analysis with an increased number of SSR markers revealed that the floury endosperm of 'Suweon 542' was directed by a major recessive locus, flo7(t), located in the 19.33-19.86 Mbp region of chromosome 5, with RM18639 explaining 92.2% of FGP variation in the F2 population. Through further physical mapping, a co-segregate and co-dominant DNA marker with the locus, flo7(t) was successfully developed, by which, thereby, breeding efficiency of rice cultivars having proper dry milling adaptability with high yield potential or useful functional materials would be improved. 'Suweon 542' maintained the early maturity of the wild type, Namil, which can be used in rice-wheat double cropping systems in Korea not only for improved arable land but also for sharing flour production facilities. In addition to the high susceptibility against major rice diseases, nevertheless, another possible drawback of 'Suweon 542' is the high rate of viviparous under prolonged rainfall during the harvesting season. To overcome susceptibility and vivipary of 'Suweon 542', the progeny lines, derived from the crosses 'Suweon 542' and 'Jopyeong', an early maturing rice cultivar with multiple resistance against rice blast, bacterial blight, and rice strip virus, and 'Heugjinju', a anthocyanin pigment containing black rice cultivar, were intensively evaluated. As the outputs, three dry milling suitable rice elite lines, 'Jeonju614', 'Jeonju615', and 'Jeonju616' were developed.

  • PDF

폐결핵의 외과적 치료 (Clinical Study of Pulmonary Resection for Tuberculosis(V))

  • 김우식;배윤숙;정성철;정승혁;유환국;이정호;김병열
    • Journal of Chest Surgery
    • /
    • 제35권11호
    • /
    • pp.799-806
    • /
    • 2002
  • 화학요법이 확립되고 유병율이 점진적인 감소에도 불구하고 폐결핵은 여전히 수술의 대상이 되고 있다. 이에 저자등은 폐결핵으로 수술을 시행한 예들을 분석, 검토함으로써 향후 폐결핵 치료에 도움이 되고자 한다. 방법 : 국립의료원 흥부외과에서 1991년1월부터 2000년12월까지 10년간 폐절제술을 시행한 144례를 토대로 본과에서 기왕에 발표된 4보까지와 비교관찰하여 폐결핵의 외과적 치료에 대한 최근 경향 및 그 결과를 검토,분석하였다. 방법으로 연간수술빈도 및 연령분포, 술전 결핵병소범위, 객담도말검사, 수술적응 및 술식의 종류, 합병증, 술후 추적관찰 결과들을 분석하였다. 결과 : 연간 수술빈도는 감소추세를 보였으며, 남녀성 비는 2:1로 남자환자가 많았고, 20대 이하의 감소와 50대 이상이 현저히 증가함으로써 연령의 고령화 현상을 볼 수 있다. 수술 전 병변의 범위는 대부분 중증 및 중등도에 속하였으며, 술전 항결핵제를 사용한 기간을 보면 3년 이상의 예가 16.0%에서 55.6%로 현저히 증가하는 추세를 보이고 있다. 한편 술전 결핵균에 대한 객담도말검사 양성율은 91%에서 27%로 급격한 감소 현상을 보였다. 수술적응에 있어서는 전폐파괴 및 폐부분파괴가 대부분을 차지하였으며, 폐실질 병소를 동반한 농흉이 4.0%에서 20.1%로 유의한 증가를 보이고 있다. 술식의 종류에 있어서 편측 폐절제술 및 폐엽 절제술이 대부분을 차지하고 있다. 술후 합병증으로는 농흉의 증가와 잔여 결핵 병소의 재발의 증가가 특징적으로 관찰되었다. 술후 추적관찰결과 완치율이 70% 이상을 나타내는 가운데 지속적으로 항결핵제 치료를 받고 있는 예가 5.8%에서 18.0%로 점진적 증가추세임을 나타냈다. 절론 : 최근 추세를 보면 화학치료에 내성을 보이는 환자가 증가하고, 늑막결핵의 증가와 중증의 병변환자의 증가가 특징적으로, 내과적 요법만으로 치유하기 어려운 병소를 정확히 판단하고 다제 내성균이 발생하기 전에 적극적으로 외과적 요법을 고려하는 것이 바람직하겠다.

메탄올 자화효모 Hansenula polymorpha에서의 재조합 단백질 분비발현을 위한 인체 혈청 알부민 융합단편의 활용 (Use of Human Serum Albumin Fusion Tags for Recombinant Protein Secretory Expression in the Methylotrophic Yeast Hansenula polymorpha)

  • 송지혜;황동현;오두병;이상기;권오석
    • 한국미생물·생명공학회지
    • /
    • 제41권1호
    • /
    • pp.17-25
    • /
    • 2013
  • 메탄올 자화효모 Hansenula polymorpha에서 분비 발현이 잘 된다고 보고된 인체 혈청 알부민(human serum albumin, HSA)을 융합단편으로 사용하여 외래 재조합 단백질을 효과적으로 분비 발현할 수 있는 발현시스템을 개발하고자 하였다. 이때 조작의 용이성 및 발현 효율 제고를 위하여 전장의 HSA 뿐만 아니라 세 종류의 각기 다른 크기의 HSA 단편을 설계하여 융합단편으로 사용하였다. 즉 HSA의 N-말단으로 부터 각기 137, 172, 320, 608개 아미노산을 갖는 융합단편 HSAft (1-4)를 제작하였다. 아울러 발현되는 HSA 단편의 검출 및 분리정제를 위한 His8-tag, HSA 융합단편과 외래 단백질간의 유연성을 부여하기 위한 2조의 $Gly_4Ser_1$ linker, 융합 발현된 타겟 단백질을 HSA 단편으로부터 용이하게 분리하기 위한 담배식각바이러스 단백질분해효소(tobacco etch virus protease, Tev) 인지 서열, 타겟 단백질 유전자를 클로닝하기 위한 멀티 클로닝 사이트(multiple cloning site, MCS)서열, 그리고 타겟 재조합 단백질의 발현 검출 및 정제를 위한 Strep-tag을 포함하는 작용기 도메인을 발현카세트 기본 골격에 포함시켰다. 이렇게 구축된 4종의 HSA 융합단편 분비발현 벡터를 H. polymorpha에 형질전환한 후 각 융합단편의 발현을 조사한 결과 HSAft 단편 3, 4의 발현을 확인할 수 있었다. 녹색형광단백질 유전자 ($GFP_{uv}$)를 상기 벡터에 클로닝한 후 H. polymorpha에 도입한 결과 형질 전환체 모두에서 녹색형광단백질의 발현을 관찰 할 수 있었다. 해당 세포로부터 분비되거나 세포내에 발현되는 HSA 단편 융합 형광단백질의 발현양을 비교한 결과 HSAft 단편 4에 융합된 경우를 제외하고 나머지 경우 모두에서 세포 파쇄액과 세포 배양액 양쪽에서 해당 HSA 단편 융합 형광단백질의 발현을 확인 할 수 있었다. 한편 HSA 융합단편의 크기에 따라 자체 혹은 타겟 단백질과 융합된 형태의 단백질 분비 발현 정도가 달라지는 것은 해당 단백질의 접힘이나 단백질 분해효소에 대한 민감성 등 여러 변수에 의한 것으로 사료되며 따라서 본 연구에서 개발한 H. polymorpha용 HSA 융합단편 분비발현 시스템은 특정 외래 재조합 단백질의 효율적인 분비발현 융합단편의 선별 및 과발현 시스템 구축에 유용하게 활용될 수 있을 것으로 기대된다.

상추와 원유에서 분리한 황색 포도상구균의 유전형 및 표현형 특징 (Genotypic and Phenotypic Characteristics of Staphylococcus aureus Isolates from Lettuces and Raw Milk)

  • 정혜진;조준일;박성희;하상도;이규호;김철호;송은섭;정덕화;김민곤;김광엽;김근성
    • 한국식품과학회지
    • /
    • 제37권1호
    • /
    • pp.134-141
    • /
    • 2005
  • S. aureus는 자연계에 널리 상재해 있으며 우리나라의 경우 Salmonella spp.에 의한 식중독 다음으로 많이 발생하는 식중독의 원인균으로 알려져 있다. 따라서 본 실험에서는 상추와 원유로부터 분리한 S. aureus(n=86)의 표현형 및 유전형 특징을 파악할 목적으로 coagulase, hemolysin, enterotoxin 및 toxic shock syndrome toxin I 등에 대한 유전자를 대상으로 PCR 방생제 감수성 시험을 수행하여 그들 분리균주들의 항생제 내성정도를 결정하였다. 상추와 원유로부터 분리한 S. aureus 균주는 모두 coagulase 유전자를 보유하고 있었고, 또한 PCR 산물의 amplicon size는 500bp(2.4%), 580bp(17.4%), 660bp(61.6%), 740bp(17.4%) 및 820bp(1.2%)로 다섯 종류가 검출되었다. Hemolysin 유전자의 경우는 원유로부터 분리한 4개의 hld 유전자 보유균주를 제외하고 모든 분리균주에서 multiple hemolysin gene을 보유하였으며, 그 중 47개 균주(54.7%)가 hla/hld/hlg2 유전자를 모두 소유한 균주로서 가장 많은 분포를 나타내었다. 한편, enterotoxin 유전자를 소유한 S. aureus 분리균주는 37 균주(43.0%)로서 그중 32균주(37.2%)에서 sea 유전자가 검출되었고, 1균주(1.1%)에서 sed 유전자, 그리고 4균주(4.6%)에서 sea와 sed 유전자가 모두 검출되었으나, seb, sec 혹은 tsst-1 유전자는 검출되자 않았다. 그리고 항생제 감수성 시험 결과에서는 모든 균주가 ciprofloxacin, oxacillin, vancomycin 그리고 trimethoprim/sulfamethoxazole에 대하여 감수성을 나타내었고 penicillin G(98.8%)는 높은 감수성을 보였으나 chloramphenicol(63%)과 erythromycin(59%)은 감수성이 낮았고, chloramphenicol, clindamycin, erythromycin 및 penicillin G에 대하여는 각각 4.7%, 82.6%, 14.0% 및 1.2%의 균주가 내성을 가지고 있었다. 또한 항생제 다제내성 양상을 살펴본 결과에 의하면 사용된 8종류의 항생물질들 중 2가지 항생물질에 대하여 내성을 나타낸 균주는 7개(8.1%)이고, 3종 이상의 항생물질에 대하여 다제 내성을 보이는 균주는 나타나지 않았다.

식물 및 미생물 유래 유기농자재 살충효과: 단감해충 감꼭지나방, 톱다리개미허리노린재 (Eco-Friendly Organic Pesticides (EFOP)-Mediated Management of Persimmon Pests, Stathmopoda masinissa and Riptortus pedestris)

  • 김종철;유정선;송민호;이미롱;김시현;이세진;김재수
    • 한국응용곤충학회지
    • /
    • 제55권4호
    • /
    • pp.319-327
    • /
    • 2016
  • 단감 해충의 효과적인 방제를 위하여, 현재까지 주로 화학 살충제가 사용되어 왔으나, 최근 화학 살충제의 과다 사용은 해충 저항성과 농약 잔류 문제라는 심각한 문제를 야기하고 있다. 본 연구에서는 친환경 유기농자재 (Eco-Friendly Organic Pesticides; EFOP)의 주요 단감 해충인 감꼭지나방과 톱다리개미허리노린재에 대한 살충 활성을 검토하였다. 현재 유통되고 있는 친환경 유기농자재 11 종을 실험실 조건에서 대상 해충에 분무 처리하였다. 대조 약제는 화학 살충제인 buprofezin+dinotefuran (20+15) 수화제를 사용하였다. 감꼭지나방에 대한 유기농자재의 살충 효과를 평가하는 과정에서, 감꼭지나방 유충의 개체수 부족 문제로 인하여 배추좀나방 유충을 1차 실험충으로 사용하였으며, 세 종류의 친환경 유기농자재를 사전 선발하였다. 선발된 친환경 유기농자재는 목초액 (EFOP-1), 회화나무, 양명아주, 멀구슬나무의 혼합추출물 (EFOP-2), Bacillus thuringiensis subsp. aizawai NT0423 (EFOP-11)이었으며, 선발된 유기농자재의 감꼭지나방 유충에 대한 살충력 실험 결과, EFOP-2의 처리구에서 생충율이 27.7% (5 일차), 13.3% (7 일차), 6.7% (10 일차)로 가장 높은 살충 효과를 보였다. 톱다리개미허리노린재에 대한 살충 효과 평가에서는 회화나무, 양명아주, 멀구슬나무의 혼합추출물 (EFOP-2, EFOP-9)과 고삼, 데리스의 혼합추출물 (EFOP-10)이 높은 살충 효과를 보였다. 특히 EFOP-2의 처리구에서 생충율이 20.0% (5 일차), 16.7% (10 일차)로 가장 높은 살충 효과를 보였다. 결론적으로, 친환경 유기농자재인 EFOP-2를 이용하여 단감의 주요 해충인 감꼭지나방과 톱다리개미허리노린재를 포함한 다양한 노린재 해충에 대한 방제가 가능할 것으로 판단된다.

한국에서 수분수지의 생태적 중요성과 대기오염 및 토양 산성화로 인한 식물의 수분스트레스 증대 효과 (Ecological Importance of Water Budget and Synergistic Effects of Water Stress of Plants due to Air Pollution and Soil Acidification in Korea)

  • 이창석;이안나
    • The Korean Journal of Ecology
    • /
    • 제26권3호
    • /
    • pp.143-150
    • /
    • 2003
  • 한국은 양적으로 강수량이 풍부하지만 강우현상이 편중되어 매년 일정기간의 가뭄기를 겪는다. 더구나 그 토양은 대부분 화강암에서 유래한 거친 입자의 것으로서 보수력이 낮다. 수 종의 참나무류와 소나무의 수분스트레스에 대한 반응 결과는 수분수지가 식생의 분포를 결정하는 주 요인임을 보여주었다. 뿐만 아니라 몇몇 상록식물의 월동기간 중 내한성 기작에 기인한 탈수 정도는 자연상태에서 그들의 분포와 밀접하게 관계되었다. 수분스트레스 처리 실험 결과 소나무는 건조에 대해 강한 내성을 보였지만 그 유식물은 가뭄기에 높은 고사율을 나타내었다. 그 고사율은 지소의 토양수분함량에 비례하는 경향이었다. 가뭄이 심한 6월 중 삼림토양의 수분함량과 수분스트레스 처리 실험에서 소나무 유식물이 영구위조점에 도달한 시점에서 배지토양의 수분함량을 비교한 결과는 가뭄기에 소나무 유식물의 높은 고사율이 수분부족에 기인함을 입증하였다. 대기오염물질 폭로실험 중 측정된 시료식물의 수분포텐셜은 시료식물에서 가시피해의 발생과 그 내성에 수분요인이 관계될 가능성을 보여주었다. 야외 현장 조사와 실내실험 결과 둘 다에서 심한 대기오염에 노출된 식물은 그렇지 않은 것과 비교하여 수분소실이 빠르게 일어나는데, 그것은 오염물질에 의한 잎 표면의 손상 정도와 관계되었다. 산성 토양에서 높은 함유량을 보이는 알루미늄은 식물의 뿌리생장을 억 제하거나 비정상적 분포를 가져와 수분스트레스를 유발하였다. 대기오염과 토양 산성화에 기인한 이러한 수분스트레스 효과는 한국의 기후와 토양이 가지는 기존의 수분결핍효과에 덧붙여져 삼림쇠퇴를 유발하는 주 요인으로 작용할 가능성이 있다. 토양의 유기물 함량을 높여 포장용수량 증가에 기여할 수 있는 sludge는 산성토양을 개량하는데 기존의 개량제 못지않은 효과를 보였고, 낙엽 추출물 또한 알루미늄에 의한 수분스트레스 효과를 완화시키는데 기여하였다. 이러한 결과를 종합하여 한국에서 삼림쇠퇴를 유발할 수 있는 스트레스요인들의 잠재적 상호작용을 모식화하였다. 나아가 그것을 완화할 수 있는 복원방안을 토양개량과 식생복원의 측면에서 제시하였다.

모바일 기반 온실 냉난방 부하 산정 프로그램 개발 (Development of Greenhouse Cooling and Heating Load Calculation Program Based on Mobile)

  • 문종필;방지웅;황정수;장재경;윤성욱
    • 생물환경조절학회지
    • /
    • 제30권4호
    • /
    • pp.419-428
    • /
    • 2021
  • 모바일 기반 온실에너지 계산프로그램을 제작하기 위해 먼저 주요 단일 피복재 10종 및 보온재 16종에 대한 열관류율 측정하였다. 또한 피복 및 보온재를 이중 및 삼중으로 다층 설치할 때 열관류율 추정을 위하여 이중 설치시 24조합, 삼중설치 시 59조합에 대한 열관류율을 핫박스를 이용하여 측정하였다. 단일 피복재에서는 PE필름(0.08mm) 대비 PO필름(0.15mm)이 가장 열관류율이 가장 작고 열절감율이 가장 큰 것으로 나타났다. 단일 보온재에서는 열관류율에서는 외피가 있는 5겹의 다겹보온커튼이 가장 보온력이 좋은 것으로 나타났다. 또한 단일자재에 대한 열관류율 값과 열저항값을 이용한 피복 및 보온재의 다층설치시의 총 열관류율 값을 산정하였고 실측 값과의 오차를 보정하는 선형회귀식을 도출하였다. 단일재료의 열관류율값에 의한 피복 및 보온재의 다층설치시 열관류율 추정 모형을 개발한 결과 모형평가지수가 0.90(0.5 이상일 때 양호)으로 나타나 추정치가 실측치를 매우 잘 재현 하고 있는 것으로 나타났다. 또한 시험온실을 통한 실증시험결과 예측된 열절감율이 실측치보다 상대오차 2%로 작게 나타나는 것으로 평가되었다. 이러한 연구결과를 기반으로 모바일 기반의 온실 에너지계산 프로그램을 개발하였다. 이 프로그램은 HTML5 표준 웹 기반 모바일 웹 애플리케이션으로 구현하였으며 N-Screen 지원을 통해 다양한 모바일 장치 및 PC 브라우저에서 동작이 가능하게 제작되었다. 또한 온실 피복(12종) 및 보온재(16종)의 조합별 열관류율 및 난방부하계수를 제공하여 농민이 모바일로 온실 위치, 형태 및 피복·보온재 등을 반영한 최대 주야간 냉난방부하 및 기간 난방부하를 산정할 수 있다. 대상 온실의 에너지 소비량에 대한 평가가 가능하며 온실의 지역 및 형태에 따라 피복 및 보온재의 최적 선택으로 에너지 절감형 온실 설계가 가능할 것으로 판단되었다.

가성부갑상선기능저하증 환자의 분자유전학적 및 임상적 특징: 단일기관의 경험 (Molecular and Phenotypic Characteristics of Patients with Pseudohypoparathyroidism: Single Center's Experience)

  • 김민지;윤주영;유석동;이준;전종근
    • 대한유전성대사질환학회지
    • /
    • 제21권1호
    • /
    • pp.7-14
    • /
    • 2021
  • 목적: 가성부갑상선기능항진증은 GNAS 부위의 돌연변이에 의해 발생하며, 여러 호르몬에 대한 저항성과 올브라이트 유전성 골이영양증을 특징으로 한다. 이 연구는 가성부갑상선기능항진증의 표현형 특성과 분자유전학적 특징을 조사하고자 하였다. 방법: 부산대학교 어린이병원에 등록된 가성부갑상선기능항진증으로 진단된 환자 8명의 임상적 특징과, 생화학적, 유전학적 검사 결과들을 포함한 의무기록을 후향적으로 조사하였다. 결과: 총 8명의 환자 중 5명은 PHP1a로 진단되었고 3명은 PHP-1b로 진단되었다. PHP1a 환자는 GNAS 유전자의 3가지 서로 다른 돌연변이를 가졌고, PHPIb 환자는 DMR (differential methylated region) 각인 GNAS의 소실을 보였다. 두 개의 새로운 GNAS 변이(c.313-2A>T, c.1094G>A)가 PHP1a 환자에서 발견이 되었다. 모든 PHP1a 환자는 저신장(80%), 단지증(80%), 둥근 얼굴(80%), 비만(40%), 이소성 골화(60%), 지적 장애(60%) 등의 올브라이트 유전성 골이영양증의 특징을 보였으며, PHP1b 환자의 경우는 한 명(33.3%)만이 둥근 얼굴과 같은 올브라이트 유전성 골이영양증의 특징을 보였다. PHP1a 환자와 PHP1b 환자의 표현형 특징을 비교하였을 때, 현재 키 SDS만이 PHP1b 환자에서 PHP1a 환자보다 각각 더 높은 경향성을 보였다(P=0.06). 결론: 본 연구는 한국인 PHP 환자들의 임상적 표현형 및 유전학적 특징을 요약하였다. PHP1a와 PHP1 환자들 간에 상당한 임상적 중복이 있었지만, 다른 장기 말단 저항의 영향뿐만 아니라 PHP로 진단받은 소아의 성장과 발달을 평가하기 위해서는 더 장기적인 추적 연구가 필요하겠다.

장기간의 복합운동이 골다공증 노인의 신체부위별 골밀도와 심혈관질환 위험요인에 미치는 영향 (Long-term Combined Exercise has Effect on Regional Bone Mineral Density and Cardiovascular Disease Risk Factors of the Elderly with Osteoporosis)

  • 최필병
    • 한국노년학
    • /
    • 제31권2호
    • /
    • pp.355-369
    • /
    • 2011
  • 본 연구는 장기간의 복합운동이 골다공증 노인의 신체부위별 골밀도와 심혈관질환 위험요인에 어떠한 영향을 미치는가를 규명함으로써 골다공증 노인의 골밀도 개선과 심혈관질환을 예방하기 위한 운동 지침을 제공하고자 실시하였다. 연구의 대상자는 서울 S·K타워 실버타운에 입주하여 거주하는 골다공증 노인 여성 31명으로 규칙적인 복합운동군(n=16)과 통제군(n=15)으로 무선배정 하였다. 복합운동프로그램으로 동적 및 정적 스트레칭으로 이루어진 준비운동과 정리운동을 각각 10분씩 실시하고, 본 운동에서 유산소운동으로 자전거와 트레드밀을 이용하여 30~45분(예비 심박수; HRR 40%~60%) 동안 실시하였으며, 무산소운동으로는 대근육 단련을 위한 7가지 웨이트트레이닝(1RM * 50-70%; 8-10회 * 2세트 ~ 10-15회 * 1세트)을 주당 5일 1년간 시행하였다. 통제군은 실험이 진행되는 기간 동안 S·K타워에서 규칙적인 운동 및 신체활동에 참여하지 않고 TV 시청이나 회원과의 담소를 나누는 정도의 좌업생활을 하였다. 또한 이들은 실험 전, 중, 후에 신체 부위별 골밀도(상지, 하지, 골반, 척추, 체간 및 T-score)와 심혈관질환 위험요인(혈압, 혈중지질)을 측정하였다. 그 결과 첫째, 신체 부위별 골밀도에서는 골반, 척추, 체간 및 T-score에서 유의한 차이를 나타내었다. 둘째, 심혈관질환 위험요인 중 혈압(SBP, DBP)에서도 유의한 차이를 나타내었으며, 혈중지질의 변인 중 TC, TG, LDL-C 및 HDL-C에서도 유의한 차이를 나타내었다. 결론적으로 장기간 실시하는 복합운동은 골다공증 노인에게 있어 골반, 척추, 체간의 골밀도 및 T-score 개선과 함께 심혈관 질환 위험요인을 감소시킴에 따라 심혈관 질환으로 인한 사망률과 골절의 위험성을 감소시키고, 삶의 질을 향상 시킬 수 있을 것으로 생각된다. 이에 향후 연구에서는 골다공증과 만성질환의 다각적인 연구를 통하여 만성질환으로 인한 조기 사망률 감소와 삶의 질 향상을 위한 프로그램 개발이 논의 되어야 할 것이다.