• 한국정보과학회논문지:소프트웨어및응용
• /
• 제29권8호
• /
• pp.595-603
• /
• 2002

우수한 인식 성능을 보이기 위하여 가용한 인식기 풀(pool)로부터 다수 인식기를 선택하는 방법에 관한 연구는 소수에 불과하였다. 그래서, 어떻게 또는 얼마나 많은 인식기를 선택해야 하는가에 관한 인식기의 선택 문제는 여전히 중요한 연구 주제로 남아 있다. 본 논문에서는 선택되는 인식기의 개수가 미리 제한되어 있다는 가정 하에서, 다양한 선택 기준을 제안하고, 이들 선택 기준에 따라서 다수 인식기 시스템을 구축하며, 구축된 다수 인식기 시스템의 성능을 평가함으로써 제안된 선택 기준을 평가하고자 한다. 모든 가능한 다수 인식기의 집합은 선택 기준에 의해서 조사되고, 그 중 일부가 다수 인식기 시스템의 후보로 선정된다. 이러한 다수 인식기 시스템 후보들은 Concordia 대학과 UCI(University of California, Irvine)의 기계학습 자료로부터 얻은 무제약 필기 숫자를 인식하는 실험에 의해 평가되었다. 다양한 선택기준 중에서, 특히 조건부 엔트로피에 기반한 정보 이론적 선택 기준에 의하여 구축된 다수 인식기 시스템 후보가 다른 선택 기준에 의한 후보보다 더 유망한 결과를 보여 주었다.

• Management Science and Financial Engineering
• /
• 제21권2호
• /
• pp.9-11
• /
• 2015

This note is concerned with the use of incomplete weights in multiple criteria decision making. In an earlier study, an optimistic use of incomplete weights is developed to prioritize decision alternatives, which applies the most favorable set of weights to the alternative to be evaluated. In this note, we develop a method for a pessimistic use, thereby applying the least favorable weight set to the evaluated alternative. This development makes possible a more detailed prioritization of competing alternatives, and hence enhances decision-making powers.

• 유통과학연구
• /
• 제22권7호
• /
• pp.73-82
• /
• 2024

Purpose: This study aims to identify the assessment criteria on textile and apparel supply chain management performance. Research design, data, and methodology: An integrated method of Delphi, quantitative survey, and ANP, in which Delphi with Kamet principle was applied to define the set of criteria, quantitative survey with reliability and validity test was utilized to ensure the match between the set of criteria and the whole textile and apparel industry, and ANP was used to derive weights of these criteria. Results: The set of supply chain management performance evaluation criteria composes of seven criteria namely order fulfillment quality, agility, costs, asset management, information sharing, innovation, and product development and 19 sub-criteria. Conclusions: This study theoretical contribution is the proposition of the set of evaluation criteria on supply chain performance. Regarding practical contribution, the study findings are guidelines for T&A companies in assessing and improving their supply chain capability. However, the findings are only for Vietnamese T&A context. Future research, therefore, may be expanded to other regions or countries' T&A industry. Additionally, future step to this study may be the utilization of other techniques of MCDM or methodological approaches like multiple regression, PLSSEM in defining weights of criteria or performance evaluation.

• Journal of Construction Engineering and Project Management
• /
• 제6권2호
• /
• pp.16-23
• /
• 2016

The use of inappropriate procurement methods to deliver construction projects has long been acknowledged as a major source of poor project performance and is particularly problematic for the Libyan Construction Industry. Poor procurement method selection has been recognised as a major contributory factor to frequent time and cost overruns. This paper offers a way of selecting specific procurement methods to maximize successful project performance. The methodology involves an intensive review of relevant literature, followed by a semi-structured questionnaire survey. The key findings of the study reveal that 11 out of its 12 common selection criteria exhibit a significant contribution to one or more project performance criteria (time, cost and quality). Project clients should therefore prioritise these criteria when selecting a design-bid-build method. Knowledge of the criteria that contribute positively to project performance will also enable clients to work out, prior to and during construction, the best measures and provisions for successful project outcomes.

• Earthquakes and Structures
• /
• 제17권5호
• /
• pp.463-475
• /
• 2019

In this paper, a procedure to develop fragility curves of structures equipped with semi-active tuned mass dampers (SATMDs) considering multiple failure criteria has been presented while accounting for the uncertainties of the input excitation, structure and control device parameters. In this procedure, Latin hypercube sampling (LHS) method has been employed to generate 30 random SATMD-structure systems and nonlinear incremental dynamic analysis (IDA) has been conducted under 20 earthquakes to determine the structural responses, where failure probabilities in each intensity level have been evaluated using Monte Carlo simulation (MCS) method. For numerical analysis, an eight-story nonlinear shear building frame with bilinear hysteresis material behavior has been used. Fragility curves for the structure equipped with optimal SATMDs have been developed considering single and multiple failure criteria for different performance levels and compared with that of uncontrolled structure as well as structure controlled using passive tuned mass damper (TMD). Numerical analysis has shown the capability of SATMDs in significant enhancement of the seismic fragility of the nonlinear structure. Also, considering multiple failure criteria has led to increasing the fragility of the structure. Moreover, it is observed that the influence of the uncertainty of input excitation with respect to the other uncertainties is considerable.

• Earthquakes and Structures
• /
• 제18권2호
• /
• pp.185-199
• /
• 2020

A computationally-efficient method for multi-criteria optimisation is developed for performance-based seismic design of friction energy dissipation dampers in RC structures. The proposed method is based on the concept of Uniform Distribution of Deformation (UDD), where the slip-load distribution along the height of the structure is gradually modified to satisfy multiple performance targets while minimising the additional loads imposed on existing structural elements and foundation. The efficiency of the method is demonstrated through optimisation of 3, 5, 10, 15 and 20-storey RC frames with friction wall dampers subjected to design representative earthquakes using single and multi-criteria optimisation scenarios. The optimum design solutions are obtained in only a few steps, while they are shown to be independent of the selected initial slip loads and convergence factor. Optimum frames satisfy all predefined design targets and exhibit up to 48% lower imposed loads compared to designs using a previously proposed slip-load distribution. It is also shown that dampers designed with optimum slip load patterns based on a set of spectrum-compatible synthetic earthquakes, on average, provide acceptable design solutions under multiple natural seismic excitations representing the design spectrum.

• Earthquakes and Structures
• /
• 제8권1호
• /
• pp.77-100
• /
• 2015

Multiple tuned mass dampers (MTMDs) tuned to various frequencies have been shown to efficiently control the seismic response of structures where multiple modes are dominant. One example is irregular structures that are found more vulnerable than their symmetric counterparts. With the technology of MTMDs available, design and optimal design methodologies are required for application. Such a methodology, in the form of an analysis/redesign (A/R) scheme, has been previously presented by the authors while limiting responses of interest to allowable values, i.e., performance-based design (PBD). In this paper, the A/R procedure is modified based on formal optimality criteria, making it more cost efficient, as well as more computationally efficient. It is shown that by using the methodology presented herein, a desired performance level is successfully targeted by adding near-optimal amounts of mass at various locations and tuning the TMDs to dampen several of the structure's frequencies. This is done using analysis tools only.

• Communications for Statistical Applications and Methods
• /
• 제3권3호
• /
• pp.205-214
• /
• 1996

As flexible Bayesian test criteria for nested point null hypotheses of multiple regression coefficients, partial and overall Bayes factors are introduced under a class of intuitively meaningful prior. The criteria lead to a simple method for considering different prior beliefs on the subspaces that constitute a partition of the coefficient parameter space. A couple of tests are suggested based on the criteria. It is shown that they enable us to obtain pairwise comparisons of hypotheses of the partitioned subspaces. Through a Monte Carlo simulation, performance of the tests based on the criteria are compared with the usual Bayesian test (based on Bayes factor)in terms of their respective powers.

• 복식문화연구
• /
• 제11권1호
• /
• pp.47-65
• /
• 2003

The purpose of this study was to examine the characteristics of consumer evaluative criteria based on clothing quality perception of adult males and females. A demonstrative study was conducted using a questionnaire on adults over 20 years old who were considered to afford to purchase clothes. A total of 650 questionnaires were distributed, and among them, 380 were used for the demonstrative analysis. The study used SPSSWIN V.8.0 for the analysis. Factor analysis and reliability analysis were introduced as analysis methods using the varimax rotation to classify consumer evaluative criteria for clothing purchasing. In addition, frequency analysis, correlation analysis, 1-test, multiple regression analysis, and duncan test are executed. The study result is as follows. First. expectation, importance and performance are examined by customer quality perception. Four factors- practicability, care, aesthetics, and symbolism- are classified through the factor analysis of 19 evaluative attributes based on importance. Second, differences of quality perception f3r expectation, importance and performance were found partly in customers' demographic characteristics. Third, the influential relation of satisfaction and quality perception is examined. Aesthetics and practicability have significant influence on the general satisfaction of evaluative attributes by performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.486-490
• /
• 1993

In addtion to a basic motion task, redundant manipulators can achieve some additional tasks by optimizing proper performance criteria. Some of performance criteria can be transformed to inequality constraints. So the redundancy resolving problem can be reformulated as a local optimization problem with equality constraints for the end effector and inequality constraints for some performance criteria. In this article, we propose a method for solving the inverse kinematics of a manipulator with redundancy using the Kuhn-Tucker theorem to incorporate inequality constraints. With proper choice of inequality constraints, the proposed method gives a way of optimizing multiple criteria in redundant manipulators.