• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.8
• /
• pp.1088-1096
• /
• 2008

Data from milk performance testing were used to analyze genetic and environmental trends for purebred Tsigai, Improved Valachian and Lacaune sheep. 103,715 (Tsigai), 212,962 (Improved Valachian) and 2,196 (Lacaune) test-day records gathered by the State Breeding Institute of the Slovak Republic entered the analyses. The respective pedigree data comprised 23,724 (Tsigai), 51,401 (Improved Valachian) and 438 (Lacaune) records. The multiple-trait, mixed model methodology was used to predict the breeding values for daily milk yield, fat and protein content and to estimate the fixed and remaining random effects assumed to affect the above mentioned traits, separately for each breed. The breeding values for daily milk yield were adjusted for 150-day standardized lactation length by multiplying with the constant 150, as the breeding goal of the selection scheme in Slovakian sheep is to increase 150-day milk production and constant heritability throughout the whole lactation is assumed. The genetic trends were expressed as changes in averages of breeding values across birth years of animals. For Tsigai and Lacaune breeds, cumulative genetic changes over the analyzed period were 3.8 and 5.1 kg for 150-day milk, 0 and -0.16% for fat content and 0 and -0.12% for protein content. For Improved Valachian breed, either a low (1.6 kg for 150-day milk yield) or zero (fat and protein content) cumulative genetic change was found. The environmental trends were calculated as averages of solutions for flock-test day effect across years and months in which measurements were taken. A distinctive cyclical pattern which reflected short-time variation in milk production traits was found. Possible explanations for this phenomenon are given and discussed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.10
• /
• pp.1025-1031
• /
• 2007

GPS is widely used for positioning applications and attitude of a vehicle can be found also with multiple antennas. However, extremely weak signal level prevents GPS from indoor operation. DR with accelerometers and gyros and landmark based localization method used for indoor applications increase complexity and cost. In this paper, a simple but very efficient ultrasound based attitude determination system which determines both position and attitude in WSN is given. The range between transmitter and receivers are measured using the arrival time difference between ultrasound and RF signal. The 3 dimensional positions can be found using more than 3 range measurements. Furthermore, if more than 2 transmitters are used, the attitude can be determined using the baseline vectors obtained by differencing transmitter and receiver positions. The prototype system is implemented to evaluate the performance of the proposed method. In addition, an error analysis shows the relation between the attitude error and basel me length, quality of measurement and orientation of a vehicle. The static and dynamic experiments performed by micro mobile robot shows accurate position with less than 1.5cm error and attitude with less than 1 degree error can be obtained continuously with 20cm baseline. It is expected that these results can be adapted without modification to indoor applications such as home cleaning robot and autonomous wheelchair maneuvering.

• Journal of agricultural medicine and community health
• /
• v.22 no.1
• /
• pp.27-34
• /
• 1997

This study was performed to offer the fundamental data for preventing and controlling the cardiovascular diseases of rural community women. The number of 168 women aged 40 to 50s who live in Kumsan-gun, Chungnam were selected for analysis after medical examination by a Kumsan-gun health center during the period of November to December in 1996. Total cholesterol(TC), triglyceride(TG), high density lipoprotein cholesterol(HDL-C), blood pressure(BP), degree of obesity(BMI) and atherosclerosis index(AI) were measured and relation between these physical measurements to serum lipid levels were studied. The results were as follows; 1. Mean TC level, TG level, BP, BMI and AI were significantly increased with advancing age. 2. Mean TC level, TG level, BMI and AI of borderline BP group and hypertension group were significantly increased than those of normal BP group. 3. Mean TC level, TG level and AI of obesity group were significantly increased than those of normal BMI group. 4. Simple correlation analysis showed that the positive correlation between TC, TG, BP, BMI and AI, but the level of HDL-C was negative correlation with TG and AI. 5. In multiple regression analysis taking HDL-C level as the dependent variable and TG, TC, BP, BMI, Age AI as the independent variable, AI, TG, BMI, TC were significantly related to HDL-C.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.675-689
• /
• 2019

Development of smart construction materials with both self-strain and self-damage sensing capacities is still difficult because of little information about the self-damage sensing source. Herein, we investigate the effects of the matrix strength, fiber geometry, and fiber content on the electrical resistivity of steel-fiber-reinforced cement composites by multi-fiber pullout testing combined with electrical resistivity measurements. The results reveal that the electrical resistivity of steel-fiber-reinforced cement composites clearly decreased during fiber-matrix debonding. A higher fiber-matrix interfacial bonding generally leads to a higher reduction in the electrical resistivity of the composite during fiber debonding due to the change in high electrical resistivity phase at the fiber-matrix interface. Higher matrix strengths, brass-coated steel fibers, and deformed steel fibers generally produced higher interfacial bond strengths and, consequently, a greater reduction in electrical resistivity during fiber debonding.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.280.1-280.1
• /
• 2016

Generally InGaN/GaN green light emitting diode (LED) exhibits the low quantum efficiency (QE) due to the large lattice mismatch between InGaN and GaN. The QE of InGaN-based multiple quantum wells (MQWs) is drastically decreased when an emission wavelength shifts from blue to green wavelength, so called "green gap". The "green gap" has been explained by quantum confined Stark effect (QCSE) caused by a large lattice mismatch. In order to improve the QE of green LED, undoped graded short-period InGaN/GaN superlattice (GSL) and Si-doped GSL (SiGSL) structures below the 5-period InGaN/GaN MQWs were grown on the patterned sapphire substrates. The luminescence properties of InGaN/GaN green LEDs have been investigated by using photoluminescence (PL) and time-resolved PL (TRPL) measurements. The PL intensity of SiGSL sample measured at 10 K shows stronger about 1.3 times compared to that of undoped GSL sample, and the PL peak wavelength at 10 K appears at 532 and 525 nm for SiGSL and undoped GSL, respectively. Furthermore, the PL decay of SiGSL measured at 10 K becomes faster than that of undoped GSL. The faster decay for SiGSL is attributed to the increased wavefunction overlap between electron and hole due to the screening of piezoelectric field by doped carriers. These PL and TRPL results indicate that the QE of InGaN/GaN green LED with GSL structure can be improved by Si-doping.

• Advances in aircraft and spacecraft science
• /
• v.4 no.1
• /
• pp.1-19
• /
• 2017

Fatigue life prediction of a multi-row countersunk riveted lap joint was performed numerically. The stress and strain conditions in a highly stressed substructure of the joint were analysed using a global/local finite element (FE) model coupling approach. After validation of the FE models using experimental strain measurements, the stress/strain condition in the local three-dimensional (3D) FE model was simulated under a fatigue loading condition. This local model involved multiple load cases with nonlinearity in material properties, geometric deformation, and contact boundary conditions. The resulting stresses and strains were used in the Smith-Watson-Topper (SWT) strain life equation to assess the fatigue "initiation life", defined as the life to a 0.5 mm deep crack. Effects of the rivet-hole clearance and rivet head deformation on the predicted fatigue life were identified, and good agreement in the fatigue life was obtained between the experimental and the numerical results. Further crack growth from a 0.5 mm crack to the first linkup of two adjacent cracks was evaluated using the NRC in-house tool, CanGROW. Good correlation in the fatigue life was also obtained between the experimental result and the crack growth analysis. The study shows that the selected methodology is promising for assessing the fatigue life for the lap joint, which is expected to improve research efficiency by reducing test quantity and cost.

• Clinical and Experimental Reproductive Medicine
• /
• v.44 no.4
• /
• pp.224-231
• /
• 2017

Objective: We studied the association between sperm DNA fragmentation (SDF) and several clinical in vitro fertilization outcomes. Methods: We retrospectively analyzed 169 consecutive fresh IVF cycles. Semen was collected on the day of oocyte retrieval, and we assessed standard semen parameters and the SDF level (by terminal deoxynucleotidyl transferase dUTP nick-end labeling). Poor ovarian response (POR) was defined as the collection of three or fewer mature oocytes. Oocytes were inseminated by the conventional method or intracytoplasmic sperm injection. Results: SDF did not affect the fertilization or pregnancy rate, but did have a significant effect on the miscarriage rate. In the miscarriage group (n = 10), the SDF level was significantly higher (23.9% vs. 14.1%) and number of mature oocytes was significantly lower (4.3 vs. 7.6) than in the live birth group (n = 45). Multiple regression analysis showed that SDF was an independent predictor of miscarriage (odds ratio, 1.051; 95% confidence interval, 1.001-1.104). The cutoffs for the SDF level and number of mature oocytes that could predict miscarriage were > 13% and ${\leq}3$, respectively. In the low-SDF group (${\leq}13%$), the miscarriage rate was similar in POR patients and those with a normal ovarian response (NOR; 14.2% vs. 4.3%). In the high-SDF group ( > 13%), the miscarriage rate was significantly higher in the POR group than in the NOR group (60.0% vs. 13.3%, p= 0.045). Conclusion: Our study demonstrated that a high SDF level ( > 13%) was associated with a high miscarriage rate, and that it mainly contributed to miscarriage in the POR group. The results suggest that SDF measurements should be considered in couples with POR in order to predict the prognosis of the pregnancy.

• Journal of Korean Academy of Nursing
• /
• v.48 no.4
• /
• pp.485-496
• /
• 2018

Purpose: This study aimed to test the mediating effect of uncertainty appraisal and coping style in the relation between uncertainty and anxiety in hospitalized pregnant women diagnosed with preterm labor. Methods: The participants were 105 pregnant women diagnosed with preterm labor in hospitals in Korea. Data were collected from July to October 2017. The measurements included the Uncertainty in Illness Scale, Uncertainty Appraisal Scale, Coping Style Scale, and State Anxiety Inventory. Data were analyzed using descriptive statistics, an independent t-test, correlation, and multiple regression following the Baron and Kenny method and Sobel test for mediation. Results: The mean score for anxiety was 2.29 out of 4.00 points and for uncertainty it was 2.46 out of 5.00 points. There were significant correlations among uncertainty, uncertainty danger appraisal, uncertainty opportunity appraisal, problem-focused coping, emotion-focused coping, and anxiety. Uncertainty danger appraisal (${\beta}=.64$, p<.001) had a complete mediating effect in the relation between uncertainty and anxiety (Z=4.54, p<.001). Uncertainty opportunity appraisal (${\beta}=-.45$, p<.001) had a complete mediating effect in the relation between uncertainty and anxiety (Z=3.28, p<.001). Emotion-focused coping (${\beta}=-.23$, p=.021) had a partial mediating effect in the relation between uncertainty and anxiety (Z=2.02, p=.044). Conclusion: Nursing intervention programs focusing on managing uncertainty appraisal and improving emotion-focused coping are highly recommended to decrease anxiety in hospitalized pregnant women diagnosed with preterm labor.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.191.2-191.2
• /
• 2015

Details of carrier dynamics in self-assembled quantum dots (QDs) with a particular attention to nonradiative processes are not only interesting for fundamental physics, but it is also relevant to performance of optoelectronic devices and the exploitation of nanocrystals in practical applications. In general, the possible processes in such systems can be considered as radiative relaxation, carrier transfer between dots of different dimensions, Auger nonradiactive scattering, thermal escape from the dot, and trapping in surface and/or defects states. Authors of recent studies have proposed a mechanism for the carrier dynamics of time-resolved photoluminescence CdTe (a type II-VI QDs) systems. This mechanism involves the activation of phonons mediated by electron-phonon interactions. Confinement of both electrons and holes is strongly dependent on the thermal escape process, which can include multi-longitudinal optical phonon absorption resulting from carriers trapped in QD surface defects. Furthermore, the discrete quantized energies in the QD density of states (1S, 2S, 1P, etc.) arise mainly from ${\delta}$-functions in the QDs, which are related to different orbitals. Multiple discrete transitions between well separated energy states may play a critical role in carrier dynamics at low temperature when the thermal escape processes is not available. The decay time in QD structures slightly increases with temperature due to the redistribution of the QDs into discrete levels. Among II-VI QDs, wide-gap CdZnTe QD structures characterized by large excitonic binding energies are of great interest because of their potential use in optoelectronic devices that operate in the green spectral range. Furthermore, CdZnTe layers have emerged as excellent candidates for possible fabrication of ferroelectric non-volatile flash memory. In this study, we investigated the optical properties of CdZnTe/ZnTe QDs on Si substrate grown using molecular beam epitaxy. Time-resolved and temperature-dependent PL measurements were carried out in order to investigate the temperature-dependent carrier dynamics and the activation energy of CdZnTe/ZnTe QDs on Si substrate.

• Journal of The Korean Astronomical Society
• /
• v.37 no.5
• /
• pp.427-431
• /
• 2004

We use simulations of large-scale structure formation to study the build-up of magnetic fields (MFs) in the intergalactic medium. Our basic assumption is that cosmological MFs grow in a magnetohy-drodynamical (MHD) amplification process driven by structure formation out of a magnetic seed field present at high redshift. This approach is motivated by previous simulations of the MFs in galaxy clusters which, under the same hypothesis that we adopt here, succeeded in reproducing Faraday rotation measurements (RMs) in clusters of galaxies. Our ACDM initial conditions for the dark matter density fluctuations have been statistically constrained by the observed large-scale density field within a sphere of 110 Mpc around the Milky Way, based on the IRAS 1.2-Jy all-sky redshift survey. As a result, the positions and masses of prominent galaxy clusters in our simulation coincide closely with their real counterparts in the Local Universe. We find excellent agreement between RMs of our simulated galaxy clusters and observational data. The improved numerical resolution of our simulations compared to previous work also allows us to study the MF in large-scale filaments, sheets and voids. By tracing the propagation of ultra high energy (UHE) protons in the simulated MF we construct full-sky maps of expected deflection angles of protons with arrival energies $E = 10^{20}\;eV$ and $4 {\times} 10^{19}\;eV$, respectively. Accounting only for the structures within 110 Mpc, we find that strong deflections are only produced if UHE protons cross galaxy clusters. The total area on the sky covered by these structures is however very small. Over still larger distances, multiple crossings of sheets and filaments may give rise to noticeable deflections over a significant fraction of the sky; the exact amount and angular distribution depends on the model adopted for the magnetic seed field. Based on our results we argue that over a large fraction of the sky the deflections are likely to remain smaller than the present experimental angular sensitivity. Therefore, we conclude that forthcoming air shower experiments should be able to locate sources of UHE protons and shed more light on the nature of cosmological MFs.