• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.243-247
• /
• 2005

We propose an efficient block least-mean-square (BLMS) adaptive algorithm, in conjunction with error control coding, for direct-sequence code division multiple access (DS-CDMA) systems. The proposed adaptive receiver incorporates decision feedback detection and channel encoding in order to improve the performance of the standard LMS algorithm in convolutionally coded systems. The BLMS algorithm involves two modes of operation: (i) The training mode where an uncoded training sequence is used for initial filter tap-weights adaptation, and (ii) the decision-directed where the filter weights are adapted, using the BLMS algorithm, after decoding/encoding operation. It is shown that the proposed adaptive receiver structure is able to compensate for the signal-to­noise ratio (SNR) loss incurred due to the switching from uncoded training mode to coded decision-directed mode. Our results show that by using the proposed adaptive receiver (with decision feed­back block adaptation) one can achieve a much better performance than both the coded LMS with no decision feedback employed. The convergence behavior of the proposed BLMS receiver is simulated and compared to the standard LMS with and without channel coding. We also examine the steady-state bit-error rate (BER) performance of the proposed adaptive BLMS and standard LMS, both with convolutional coding, where we show that the former is more superior than the latter especially at large SNRs ($SNR\;\geq\;9\;dB$).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.971-978
• /
• 2010

In this paper, we propose a compact multiple meander RFID tag antenna with broadband characteristic. The proposed tag antenna has been designed using the multiple meander form to effectively minimize the U-shaped half wavelength dipole antenna as the radiator part. The commercial tag chip is attached to the upper center of the rectangular shaped feed for impedance matching. The size of the antenna is $20{\times}19.7\;mm^2$ and VSWR<5.8 bandwidth is 855~964 MHz which covers the world UHF RFID bandwidth.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.8
• /
• pp.1143-1150
• /
• 2003

This study was conducted to investigate in vitro methane production of feed ingredients and relationship between the content of crude nutrients and methane production. Feed ingredients (total 26) were grouped as grains (5 ingredients), brans and hulls (8), oil seed meals (9) roughages (3), and animal by-product (1) from their nutrient composition and their methane production protential were measured by in vitro gas test. Among the groups, the in vitro methane productions for both 6 and 24 h incubation were highest in grains, followed by brans and hulls, oil meals and roughages, animal byproducts. Within the group of grains, methane production from wheat flour was the highest, followed by wheat, corn, tapioca, and then oat. Within the brans and hulls, soybean hull showed the highest methane production and cotton seed hull, the lowest. Methane production from oil meals was lower compared with grains and brans and hulls, and in decreasing order production from canola meal was followed by soybean meal, coconut meal, and corn germ meal (p<0.01). Three ingredients were selected and the interactions among feed ingredients were evaluated for methane production. Correlation coefficient between measured and estimated values of the combinations were 0.91. Methane production from each feed ingredient was decreased with increasing amount of crude fiber (CF), protein (CP) and ether extract (EE), whereas positive relationship was noted with the concentrations of N-free extract (NFE). The multiple regression equation (n=134) for methane production and nutrient concentrations was as follows. Methane production (ml/0.2 g DM)=(0.032${\times}$CP)-(0.057${\times}$EE)-(0.012${\times}$CF)+(0.124${\times}$NFE) (p<0.01; $R^2$=0.929). Positive relationship was noted for CP and NFE and negative relationship for CF and EE. It seems possible to predict methane production potential from nutritional composition of the ingredients for their effective application on formulating less methane emitting rations.

• Animal Bioscience
• /
• v.34 no.1
• /
• pp.93-101
• /
• 2021

Objective: Temperature could influence protein and amino acid deposition as well as gut microbiota profile and composition. However, the specific effects of ambient temperature on amino acids deposition and gut microbiota composition remain insufficiently understood. Methods: A total of 300 one-day-old Avian broilers were randomly divided into three groups and reared at high, medium, and low temperature (HT, MT, and LT), respectively. Breast muscle and fecal samples were collected for amino acid composition analysis and 16S rRNA gene sequence analysis. Results: Our data showed that compared to the MT group, there was a decrease of muscle leucine and tyrosine (p<0.05), as well as an increase of methionine in the HT group (p<0.05) and a decrease of serine in the LT group. Examination of microbiota shift revealed that at genus level, the relative abundance of Turicibacter and Parabacteroides was increased in the HT group (p<0.05) and that the relative abundances of Pandoraea, Achromobacter, Prevotella, Brevundimonas, and Stenotrophomonas in the LT group were higher than those in the MT group (p<0.05). In addition, there were substantial correlations between microbes and amino acids. In the HT group. Turicibacter was negatively correlated with aspartic acid and tyrosine, whereas Parabacteroides was positively correlated with methionine (p<0.05). In the LT group, there were multiple positive correlations between Achromobacter and arginine, isoleucine or tyrosine; between Prevotella and cysteine or phenylalanine; between Brevundimonas and cysteine; and between Stenotrophomonas and cysteine as well as a negative correlation between Stenotrophomonas and serine. Conclusion: Our findings demonstrated that amino acid content of breast muscle and intestinal microbiota profile was affected by different ambient temperatures. Under heat exposure, augmented abundance of Parabacteroides was correlated with elevated methionine. Low temperature treatment may affect muscle tyrosine content through the regulation of Achromobacter.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.1
• /
• pp.67-71
• /
• 2006

A total of 120 male and 240 female quail (Coturnix coturnix Pharaoh) were used to determine the effect of feeding time on laying and reproductive performance of Pharaoh quail. They were fed ad libitum between 09:00 to 17:00 or full day, daily. Each female-male pair was housed in multiple-bird cages and colony cages. Initial and final body weight, quail-day egg production, feed consumption per egg and mortality were measured to determine laying performance of breeders. A total of 960 eggs were used to determine reproductive performance of quail in each treatment group. Eggs were incubated in a commercial setter and hatcher in standard conditions. Embryonic mortality, apparent fertility, hatchability of total and fertile eggs were calculated to determine the reproductive performance. Results indicated that feeding between 09:00 to 17:00 h reduced final body weight and egg production (p<0.001, p<0.001). Whereas, limited time of feeding improved hatchability of total (p<0.001) and fertile eggs (p<0.001) and reduced embryonic mortality (p<0.001) when compared with the effects of feeding full day. It was found that there were no significant differences for the egg production of quail housed in different cage systems. Quail caged in multiple-bird cages consumed less feed (p<0.01) compared to quail housed in colony cages. There were significant differences for the mortality (p<0.05), hatchability of total (p<0.001) and fertile eggs (p<0.001), and embryonic mortality (p<0.001) during the incubation due to main effect of cage systems. There were significant cage $systems{\times}feeding$ time interactions for hatchability of total and fertile eggs and embryonic mortality (p<0.001). As a conclusion; feeding from 09:00 to 17:00 reduced laying performance of quail and improved the reproductive traits compared to full day feeding of quail breeders. But, further investigations are needed to determine the optimum length of feeding time and egg production of breeders in quail fed limited time must be evaluated in comparison with its beneficial or detrimental effects.

• Membrane Journal
• /
• v.28 no.4
• /
• pp.243-251
• /
• 2018

Methane is one of the important greenhouse gases and methane is the major component of the biogas. A multiple stage membrane process was developed and analysed with the numerical analysis so that the mole fraction of methane in the final product could be kept higher than 0.95 and simultaneously the recovery of methane was also maintained higher than 99% from the biogas using 3 polysulfone hollow fiber membrane modules which were properly connected. As the feed pressure of the biogas, the mole fraction of methane in the biogas and the membrane area in the membrane module are increased, the methane mole fraction of the final product are found to be increased. However, a proper membrane area in the module should be carefully selected in order to achieve the satisfactory goal of 0.95 mole fraction of methane and 99% recovery of methane from the biogas. Even if the multiple membrane process is utilized with the properly selected membrane modules, the limited operating ranges have to be applied in the following parameters : the feed pressure, the flow rate, the mole fraction of methane in the biogas to get both the target methane concentration and the recovery rate of methane.

• Korean Journal of Poultry Science
• /
• v.30 no.3
• /
• pp.197-202
• /
• 2003

Feeding probiotics in broiler chicks still critical in several aspects. Thus, this study was conducted to investigate the impact of feeding multiple probiotics on performance, intestinal microflora, blood cholesterol and ND antibody vaccine titer in broiler chicks. Three hundred twenty one day old male broiler chicks(cobb ${\times}$ cobb) were divided into four levels of multiple probiotics(0, 0.1, 0.2, 0.3%) with five replicates for 35 days. Basal diets contained 21.5, 19.0% CP and 3,100 kcal/kg ME for starting and finishing period, respectively. Weight gain, feed intake and feed conversion were measured weekly. The number of Salmonella, E. coli, Lactobacillus, and yeast were examined from ileum and cecum at the end of experiment. ND vaccine titer, cholesterol were detected from sera. Weight gain of birds fed probiotics were 669.33, 679.75 at the level of 0.1 and 0.2% supplemental groups for starting period. It was also improved in those treatments for finishing period and higher than control for total period. Feed conversion tended to be improved compared to that of control by the supplementation of probiotics for the first three weeks and seemed to show the similar tendency for the rest of two weeks. It was 1.611, 1.621 for the entire feeding period and improved compared with control. Total salmonella, was not decreased in ileal digesta of birds fed the probiotics compared with control, whereas the number of yeast increased in 0.1% treatment. However, the number of Lactobacillus and yeast in cecum was higher than control. Even though the blood cholesterol seem to high in 0.1% probiotics treatment, the ratio of HDL to total cholesterol showed higher than control. ND vaccine titer of birds fed probiotics were significantly higher than control (P<0.05). These results 0.1% multiple probiotics would be possible to improve the performance of broiler chicks and ND vaccine titer.

• Smart Structures and Systems
• /
• v.18 no.6
• /
• pp.1233-1250
• /
• 2016

Cracks in plate-like structures are some of the main reasons for destruction of the entire structure. In this study, a novel two-stage methodology is proposed for damage detection of flexural plates using an optimized artificial neural network. In the first stage, location of damages in plates is investigated using curvature-moment and curvature-moment derivative concepts. After detecting the damaged areas, the equations for damage severity detection are solved via Bat Algorithm (BA). In the second stage, in order to efficiently reduce the computational cost of model updating during the optimization process of damage severity detection, multiple damage location assurance criterion index based on the frequency change vector of structures are evaluated using properly trained cascade feed-forward neural network (CFNN) as a surrogate model. In order to achieve the most generalized neural network as a surrogate model, its structure is optimized using binary version of BA. To validate this proposed solution method, two examples are presented. The results indicate that after determining the damage location based on curvature-moment derivative concept, the proposed solution method for damage severity detection leads to significant reduction of computational time compared with direct finite element method. Furthermore, integrating BA with the efficient approximation mechanism of finite element model, maintains the acceptable accuracy of damage severity detection.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1247-1257
• /
• 2000

Offset-fed dish antennas are considered. Offset-fed dish antennas are widely used for DBS reception, the problem of offset-fed dish antenna has, however, received little attention because of its complicated and asymmetric geometry. A Fourier-transform technique and Physical Optics are employed to express the fields radiated from offset-fed reflector and feed horn aperture. The simultaneous equations are solved to obtain a solution in a fast convergent series, thus facilitating the numerical computation. For given parameters such as diameter of reflector, focal length, offset height of reflector center, exact solutions are derived. Since offset-fed dish antenna has an application as multi-beam antenna using multiple feed, a brief feasablity of dual beam antenna for Korea-SAT (116$^{\circ}$E, EIRP 59 dBW) and Orion-SAT (139$^{\circ}$E, EIRP 54 dBW) is given in Conclusion.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.11
• /
• pp.7-16
• /
• 2010

In this study, wire was used as the filler material for the laser repair welding, and the phenomenon in which the supplied filler material was melted and beaded down into the specimen was examined with varying laser powers and welding speeds. The optimal processing condition was found to be the laser power of 1,300 W, the welding speed and feed wire supply speed of 0.5 ml/in and the defocused distances of +2mm. At this time, the heat input(E) was $65{\sim}75\;J/mm^2$, and no internal defect occurred. When repair welding was carried out as the optimal processing for the part that had an external defect with the radius of 2mm, the filler metal was melted, resulting in the volume smaller than the defect part and thus causing the part unfilled. Therefore, it was found to be necessary to carry out repair welding two to three times by multiple passes rather than does it only once by single pass.