• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1611-1616
• /
• 2010

The purpose of this research was to determine the effect of surfactant micelles on lipid oxidation in W/O/W multiple emulsions. The content of ferric irons and hydroperoxide in the continuous phase in W/O/W multiple emulsions was measured as a function of Brij micelle. The concentration of ferric iron and hydroperoxide in the continuous phase increased with increased storage time (1~6 days). Lipid oxidation rates, as determined by the formation of lipid hydroperoxides, TBARs and headspace hexanal, in the W/O/W multiple emulsions containing ferric iron decreased when 3% surfactant micelles were exceeded. These results indicate that excess surfactant micelles could alter the physical location and prooxidant activity of iron in W/O/W multiple emulsions.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.135-140
• /
• 2009

The wide deployment of wireless access technologies and the integration of various access network interfaces into a single terminal, allows mobile end-users to be always connected to the IP network, and to use those interface simultaneously. In this paper the CTE provides various access network interfaces capabilities, allowing reception of data over multiple service providers with different characteristics. Considerations for multiple network and service provider environments are regarded as essential for the successful deployment of convergence services in Next Generation Network (NGN). Event Driven Service (EDS) is regarded as a typical convergence service converging different functions of multiple service providers. This paper first describes the deployment model of NGN convergence services for multiple service provider environments. It also covers the service scenario of EDS, a convergence service for multiple service provider environments in NGN. Multiple provider environments stimulates the unified identifier management, namely ubiquitous identification (U-ID), to enable users to be provided convergence services without awareness of multiple provides. Then the designed structure and procedures of U-ID based EDS are given. Finally, the implementation results tested on Korea Advanced Research Network (KOREN) are described.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.12
• /
• pp.1592-1599
• /
• 2000

Objective : Multiple cerebral aneurysms reportedly account for 14-33% of all cerebral aneurysms. However, multiple separate aneurysms on single parent artery are uncommon. The majority of these are found on middle cerebral artery(MCA). Multiple aneurysms arising from anterior communicating artery(ACoA) are rare. We report 5 cases of multiple aneurysms developed separately on single artery and describe angiographic and operative findings of these lesions. Materials and Methods : Among 127 patients of cerebral aneurysms operated in our hospital, only 5 had multiple aneurysms on single parent artery. Results : Among 5 cases, 4 were diagnosed preoperatively and the only one was found intraoperatively. Two were found on MCA bifurcation, one on M2 and two on ACoA. All separate aneurysms developed on single parent artery were treated successfully with multiple clipping. Conclusion : Multiple cerebral aneurysms, developed separately on single parent artery, are uncommon. Furthermore, those arising from ACoA are very rare. Despite the advanced technology in radiological examinations, multiple cerebral aneurysms may not be detected on preoperative study only. Close proximity or smaller size of the lesion may be responsible for the preoperative false negative angiographic findings.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.6
• /
• pp.123-129
• /
• 2017

In this paper, we proposed a smart multiple-tap system which a remote user with smartphone can control multiple-taps in order to reduce standby-power consumption more conveniently when plugged-in electric appliances are turned-off. Recently, several researches of smart multiple-tap using IoT technology has reported. However, in these researches, an additional device like as a server computer is necessary, or multiple-taps could be only remotely controlled by smartphone and not directly controlled by on/off switch. The proposed smart multiple-tap system does not need any additional device only if it has a WiFi router, and it can be used for user as well as remote control using smartphone application and physically direct control using contact switches like existing multiple-taps. Our approach is to develop a smart multiple-tap device capable of WiFi communication can each serve as a server or a client, and can be operated by the hybrid switch combining the on/off contact switch and the relay switch. We implemented the prototype of the proposed system composed of the smart multiple-tap device and the smartphone application, and the test of the prototype validates the proposed system.

• Journal of the Korean Society of Safety
• /
• v.19 no.1
• /
• pp.23-30
• /
• 2004

Modern production systems are very complex by request of automation, and failure modes that occur in thisautomatic system are very various and complex. The efficient fault diagnosis for these complex systems is essential for productivity loss prevention and cost saving. Traditional fault diagnostic system which perforns sequential fault diagnosis can cause catastrophic failure during diagnosis when fault propagation is very fast. This paper describes the Real-time Intelligent Multiple Fault Diagnosis System (RIMFDS). RIMFDS assesses current machine condition by using sensor signals. This system deals with multiple fault diagnosis, comprising of two main parts. One is a personal computer for remote signal generation and transmission and the other is a host system for multiple fault diagnosis. The signal generator generates various faulty signals and image information and sends them to the host. The host has various modules and agents for efficient multiple fault diagnosis. A SUN workstation is used as a host for multiple fault modules and agents for efficient multiple fault diagnosis. A SUN workstation is used as a host for multiple fault diagnosis and graphic representation of the results. RIMFDS diagnoses multiple faults with fast fault propagation and complex physical phenomenon. The new system based on multiprocessing diagnoses by using Hierarchical Artificial Neural Network (HANN).

• Bulletin of the Korean Mathematical Society
• /
• v.48 no.3
• /
• pp.445-454
• /
• 2011

In this paper, we first find a raising operator and a lowering operator for multiple Bessel polynomials and then give a differential equation having multiple Bessel polynomials as solutions. Thus the differential equations were found for all multiple orthogonal polynomials that are orthogonal with respect to the same type of classical weights introduced by Aptekarev et al.

• Journal of electromagnetic engineering and science
• /
• v.11 no.3
• /
• pp.183-185
• /
• 2011

A multiple charging method for a wireless power transfer system (WPTS) in the near-field region is proposed. We analyzed the frequency characteristics of multiple receivers in the near-field region. The results suggested that the time division WPTS can achieve efficient and equal power transmission at multiple receivers. We conclude that this system has an advantage for charging multiple receivers.

• CELLMED
• /
• v.13 no.15
• /
• pp.58.1-58.6
• /
• 2023

Objective: Report on the case of improvement of multiple alopecia areata through implementation of Ortho-Cellular Nutrition Therapy (OCNT). Methods: A Korean female in her 50s suffering from multiple alopecia areata. Results: Multiple alopecia areata was improved following implementation of OCNT. Conclusion: Application of OCNT can be helpful to multiple alopecia areata.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1300-1304
• /
• 2003

The following paper deals with a control problem of a mobile robot in home network environment. The home network causes the mobile robot to communicate with sensors to get the sensor measurements and to be adapted to the environment changes. To get the improved performance of control of a mobile robot in spite of the change in home network environment, we use the fuzzy inference system with multiple reward reinforcement learning. The multiple reward reinforcement learning enables the mobile robot to consider the multiple control objectives and adapt itself to the change in home network environment. Multiple reward fuzzy Q-learning method is proposed for the multiple reward reinforcement learning. Multiple Q-values are considered and max-min optimization is applied to get the improved fuzzy rule. To show the effectiveness of the proposed method, some simulation results are given, which are performed in home network environment, i.e., LAN, wireless LAN, etc.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.439-445
• /
• 2016

In this paper, we consider subcarrier-index modulation (SIM) for precoded orthogonal frequency division multiplexing (OFDM) with a few activated subcarriers per user and its generalization to multi-carrier multiple access systems. The resulting multiple access is called sparse index multiple access (SIMA). SIMA can be considered as a combination of multi-carrier code division multiple access (MC-CDMA) and SIM. Thus, SIMA is able to exploit a path diversity gain by (random) spreading over multiple carriers as MC-CDMA. To detect multiple users' signals, a low-complexity detection method is proposed by exploiting the notion of compressive sensing (CS). The derived low-complexity detection method is based on the orthogonal matching pursuit (OMP) algorithm, which is one of greedy algorithms used to estimate sparse signals in CS. From simulation results, we can observe that SIMA can perform better than MC-CDMA when the ratio of the number of users to the number of multi-carrier is low.