• Journal of Electrochemical Science and Technology
• /
• v.2 no.1
• /
• pp.14-19
• /
• 2011

Quasi-equilibrium profiles are analyzed through galvanostatic intermittent titration technique (GITT) and potentiostatic intermittent titration technique (PITT) to study the charge/discharge mechanism in multicomponent olivine structure ($LiMn_{1/3}Fe_{1/3}Co_{1/3}PO_4$). From GITT data, the degree of polarization is evaluated for the three regions corresponding to the redox couples of $Mn^{2+}/Mn^{3+}$, $Fe^{2+}/Fe^{3+}$ and $Co^{2+}/Co^{3+}$. From PITT data, the current vs. time responses are examined in each titration step to find out the mode of lithium de-intercalation/intercalation process. Furthermore, lithium diffusivities at specific compositions (x in $Li_xMn_{1/3}Fe_{1/3}Co_{1/3}PO_4$) are also calculated. Finally, total capacity ($Q^{total}$) and diffusional capacity ($Q^{diff}$) are obtained for some selected voltage steps. The entire study consistently confirms that the charge/discharge mechanism of multicomponent olivine cathode is associated with a one-phase reaction rather than a biphasic reaction.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.1
• /
• pp.27-32
• /
• 2002

In this study, estimate of Mechanical Properties depending on Injected direction in Polymer for Automobile Application. The used materials is polyamid(nylon6), polypropylene(PP) of a simple component and its mixed, reinforced glass fiber(15%) in polyamid. One side direction of a simple component is highest strength and the two sides direction of multicomponent appear lowest strength. This is caused by effects of weldline, imperfect fusion and impregnation of multicomponent. To improve mechanical properties, it is necessary to minimize of weldline, compatibility, perfect fusion and impregnation in multicomponent polymer.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.221-230
• /
• 2005

Interfacial interactions and interphases played a key role in multicomponent materials irrespectively of the number and type of their components or their actual structure. They were equally important in particulate filled polymer, polymer blends, fibers-reinforced advanced composites, nanocomposites or biomimetic materials. Recognition of the role of the main factors influencing interfacial adhesion and proper surface modification could lead to significant progress in many fields of research and development, as well as in related technologies. Although the role and importance of interfaces and interphases were the same for all multicomponent materials, the surface modification could be always selected according to the objectives targeted, as well as to the characteristics of the particular system. In this wort therefore, several types of surface modification were performed to improve the interfacial interactions between two components in composite system and their results for the composites were investigated.

• Korean Journal of Materials Research
• /
• v.21 no.7
• /
• pp.371-376
• /
• 2011

We report on the effects of $TiO_2$ doping power on the characteristics of multicomponent $TiO_2$-ITO (TITO) electrodes prepared by a multi-target sputtering system with tilted cathode guns. Both as-deposited and annealed TITO electrodes showed linearly increased sheet resistance and resistivity with increasing $TiO_2$ doping power. However, the TITO electrodes exhibited a fairly high optical transmittance regardless of the $TiO_2$ doping power due to the high transparency of the $TiO_2$. Although the annealed TITO showed much lower sheet resistance and resistivity relative to the as-deposited samples, the electrical properties of the annealed samples exhibited similar dependence on the $TiO_2$ power to the as-deposited samples. In addition, it was found that doping of an anatase $TiO_2$ in the ITO electrode prevented the preferred (222) orientation of the TITO electrodes. Although the TITO electrode showed higher sheet resistance and resistivity than that of the pure ITO electrode, it offers a very smooth surface and usage of a low-cost Ti element. It is thus considered a promising multicomponent transparent conducting electrode for cost-efficient flat panel displays and photovoltatics.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.05a
• /
• pp.51-51
• /
• 1997

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.72.4-72
• /
• 1998

• Journal of Powder Materials
• /
• v.26 no.5
• /
• pp.375-382
• /
• 2019

Homogeneous multicomponent indium gallium zinc oxide (IGZO) ceramics for transparent electrode targets are prepared from the oxides and nitrates as the source materials, and their properties are characterized. The selected compositions were $In_2O_3:Ga_2O_3:ZnO$ = 1:1:2, 1:1:6, and 1:1:12 in mole ratio based on oxide. As revealed by X-ray diffraction analysis, calcination of the selected oxide or nitrides at $1200^{\circ}C$ results in the formation of $InGaZnO_4$, $InGaZn_3O_6$, and $InGaZn_5O_8$ phases. The 1:1:2, 1:1:6, and 1:1:12 oxide samples pressed in the form of discs exhibit relative densities of 96.9, 93.2, and 84.1%, respectively, after sintering at $1450^{\circ}C$ for 12 h. The $InGaZn_3O_6$ ceramics prepared from the oxide or nitrate batches comprise large grains and exhibit homogeneous elemental distribution. Under optimized conditions, IGZO multicomponent ceramics with controlled phases, high densities, and homogeneous microstructures (grain and elemental distribution) are obtained.

• The Korean Journal of Ceramics
• /
• v.6 no.1
• /
• pp.58-63
• /
• 2000

The preparation of Y-doped $SrZrO_3$powder by ultrasonic spray pyrolysis was investigated as a representative system, in order to produce fine, single phase multicomponent oxide powders. A precursor solution containing metal nitrates, citric acid and ethylene glycol was atomized glycol was atomized with an ultrasonic spray nozzle. Gel particles formed by organic functional groups were pyrolyzed and subsequently calcined at $800^{\circ}C$ to obtain well-crystallized, single perovskite phase. Most of large particles exhibited macroscopic pores and weak agglomeration between primary particles. However, strong agglomeration was observed in the surfaces of large particles. The effect of the microstructures of these particles on size reduction to submicron particles was described.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.11-11
• /
• 2004

Under the coordination of GKSS a new European project in the field of membrane development started recently. This project focuses on the development of novel nanostructured materials for selective material transport and separation. Two classes of materials will be developed in this project: nanostructured organic/inorganic hybrid materials and functional self-organized supramolecular copolymers.(omitted)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.126-126
• /
• 2012

In past decades, the themal inkjet (TIJ) printer has been widely used as one of the most well-known digital printing technology due to its low cost, and high printing quality. Since the printing speed of TIJ printers are much slower than that of laser printers, however, there has been intensive efforts to raise the printing speed of TIJ printers. One of the most plausible methods to raise the printing speed of TIJ printers is to adopt a page-wide array TIJ printhead. To accomplish this goal, the high efficiency inkjet heating resistor films should be developed to settle the high power consumption problem of a page-wide array TIJ printhead. In this study, we investigated noble metal based multicomponent thin film resistor films prepared by atomic layer deposition (ALD) for a high efficiency inkjet printhead. Design concept, preparation, material properties of noble metal based multicomponent thin films will be discussed in terms of mutlfunctionality.