• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.465-466
• /
• 2006

A single-wall carbon nanotube (SWCNT) has been studied as a material of Nano-Eletro-Mechanical-System (NEMS) device together with various nanowires. In order for oscillation of a multi-wall carbon nanotube (MWCNT) or a single-walled carbon nanotube (SWCNT) on plane surface, it needs suspension of a CNT across trench electrodes. So we propose fabrication method of a MWCNT resonator using dielectrophoresis and show successful results of suspeneded MWNT. Thin electrodes with large gaps could not suspend small diameter MWNT but thicker electrodes could. Thin MWNT could be suspended only when the electrode gap was reduced.

• Smart Structures and Systems
• /
• 제18권2호
• /
• pp.217-231
• /
• 2016

The present work aims to develop piezoresistive sensors of excellent piezoresistive response attributable to change in nanoscale structures of multi-wall carbon nanotube (MWNT) embedded in cement. MWNT was distributed in a cement matrix by means of polymer wrapping method in tandem with the ultrasonication process. DC conductivity of the prepared samples exhibited the electrical percolation behavior and therefore the dispersion method adopted in this study was deemed effective. The integrity of piezoresistive response of the sensors was assessed in terms of stability, the maximum electrical resistance change rate, and sensitivity. A composite sensor with MWNT 0.2 wt.% showed the lowest stability and sensitivity, while the maximum electrical resistance change rate exhibited by this sample was the highest (96 %) among others and even higher than those found in the literature. This observation was presumably attributed by the percolation threshold and the tunneling effect. As a result of the MWNT content (0.2 wt.%) of the sensor being near the percolation threshold (0.25 wt.%), MWNTs were close to each other to trigger tunneling in response of external loading. The sensor with MWNT 0.2 wt.% was able to maintain the repeatable sensing capability while sustaining a vehicular loading on road, demonstrating the feasibility in traffic flow sensing application.

• Bulletin of the Korean Chemical Society
• /
• 제29권7호
• /
• pp.1386-1390
• /
• 2008

Artemisinin, the effective ingredient of Chinese herb Artemisia annua L (Qinghao in Chinese), has been proved to be effective to antimalarial. Herein, a reliable, sensitive and convenient electrochemical method was developed for the determination of artemisinin utilizing the excellent properties of multi-wall carbon nanotube (MWNT). The electrochemical behavior of artemisinin was investigated. It is found that the reduction peak current of artemisinin remarkably increases and the peak potential shifts positively by 240 mV at the MWNT film-modified electrode. These phenomena indicate that the MWNT film exhibits efficient catalytic activity to the electrochemical reduction of artemisinin. The effects of pH value, amount of MWNT, scan rate and accumulation time were examined. The limit of detection (S/N = 3) is as low as 10 $\mu$ g $L^{-1}$. Finally, this newly developed method was used to determine the content of artemisinin in Artemisia annua L.

• 한국정밀공학회지
• /
• 제24권3호
• /
• pp.134-139
• /
• 2007

We report the suspension of individual multi-walled carbon nanotubes (MWNTs) from the bottom substrate using deep trench electrodes that were fabricated using optical lithography. During drying of the solution in dielectrophoretic assembly, the capillary force pulls the MWNT toward the bottom substrate, and it then remains as a deformed structure adhering to the bottom substrate after the solution has dried out. Small-diameter MWNTs cannot be suspended using thin electrodes with large gaps, but large-diameter MWNTs can be suspended using thicker electrodes. We present the statistical experimental results for successful suspension, as well as the feasible conditions for a MWNT suspension based on a theoretical approach.

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1897-1901
• /
• 2010

Multi-wall carbon nanotube (MWNT)-modified glassy carbon electrodes (GCE) were prepared for simultaneous determination of rutin and quercetin. Microbial carbohydrates, $\alpha$-cyclosophorohexadecaose ($\alpha$-C16) and succinoglycan monomer M3 (M3) were doped into MWNTs to prepare a $\alpha$-C16-doped MWNT-modified GCE (($\alpha$-C16 + MWNTs)/GCE) and a M3-doped MWNT-modified GCE ((M3 + MWNTs)/GCE), respectively. The sensitivities of the ($\alpha$-C16 + MWNTs)/GCE to rutin and quercetin were 34.7 ${\mu}A\cdot{\mu}M^{-1}{\cdot}cm^{-2}$ and 18.3 ${\mu}A\cdot{\mu}M^{-1}{\cdot}cm^{-2}$, respectively, in a linear range of $2\sim8{\mu}M$ at pH 7.2. The sensitivities of the (M3 + MWNTs)/GCE was 2.44 ${\mu}A\cdot{\mu}M^{-1}{\cdot}cm^{-2}$ for rutin and 7.19 ${\mu}A\cdot{\mu}M^{-1}{\cdot}cm^{-2}$ for quercetin without interference.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.692-693
• /
• 2002

Well-aligned multi-wall carbon nanotubes (MWNTs) were fabricated by utilizing a radio frequency plasma-enhanced chemical vapor deposition (rf-PECVD) system from Ni particles at the bottom of anodic alumina nanoholes (AAN). To remove the amorphous graphite layers on the AAN surface and to eliminate the protrusion of MWNT tips, the AAN surface with MWNTs were treated by external rf plasma source. As a result, the AAN surface almost became flat without having any protrusion of MWNT tips. The diameter, length of MWNTs and AAN were investigated by using a scanning electron microscopy (SEM). Raman spectroscopy was also used to characterize wall structure of the carbon nanotube. And the emission properties of the MWNTs were measured for the application of field emission display (FED) in near future.

• Composites Research
• /
• 제30권1호
• /
• pp.7-14
• /
• 2017

In this paper, the inter-lamina shear strength (ILSS) of multi-wall carbon nanotube (MWNT) reinforced carbon fiber reinforced plastics (CFRP) and thin-ply composites were verified under low earth orbit (LEO) space environment. CFRP, MWNT reinforced CFRP, thin-ply CFRP and MWNT reinforced thin-ply CFRP were tested after aging by using accelerated ground simulation equipment. The used ground simulation equipment can simulate high vacuum ($2.5{\times}10^{-6}torr$), atomic oxygen (AO, $9.15{\times}10^{14}atoms/cm^2{\cdot}s$), ultraviolet light (UV, 200 nm wave length) and thermal cycling ($-70{\sim}100^{\circ}C$) simultaneously. The duration of aging experiment was twenty hours, which is an equivalent duration to that of STS-4 space shuttle condition. After the aging experiment, ILSS were measured at room temperature ($27^{\circ}C$), high temperature ($100^{\circ}C$) and low temperature ($-100^{\circ}C$) to verify the effect of operation temperature. The MWNT and thin-ply shows good improvement of ILSS at ground condition especially with the thin-ply. And after LEO exposure large degradation of ILSS was observed at MWNT added composite due to the thermal cycle. And the degradation rate was much higher under the high temperature condition. But, at the low temperature condition, the ILSS was largely recovered due to the matrix toughening effect.

• 한국정보전자통신기술학회논문지
• /
• 제16권1호
• /
• pp.8-17
• /
• 2023

기존 liquid crystal display(LCD) 공정에서 Indium Tin Oxide(ITO) 투명전극과 폴리이미드 배향막의 러빙 공정은 액정을 정렬하고 전계를 인가하기 위하여 필수적인 공정이다. 하지만 ITO의 증착은 높은 진공을 요구하며, 러빙 공정은 정전기에 의해 소자가 손상될 수 있는 단점이 존재한다. 본 논문에서는 기존 ITO 투명전극을 대체하기 위하여 PEDOT:PSS와 Multi-wall carbon nanotube(MWNT)를 혼합하여 PEDOT:PSS 나노복합체를 제조하고, 러빙 공정을 대체하기 위하여 나노 주름 구조 몰드를 통한 나노임프린팅을 통하여 박막을 형성함으로써 기존 액정 디스플레이의 투명전극과 배향막 두 가지 박막을 PEDOT:PSS/MWNT 나노복합체 박막 하나만으로 기능하게 하여 공정을 단순화 하였다. 전사된 나노 주름을 따라 액정이 잘 배향됨을 확인하였으며, 이를 기반으로 만들어진 액정 셀에서 박막 내 MWNT의 함량이 높아질수록 박막의 전기전도도가 증가하여 낮은 구동 전압과 빠른 응답 속도를 갖는다는 것을 확인하였다. 본 연구를 통해 공정 단순화와 용액공정에 의한 공정 단가 절감, 기존 러빙 공정의 단점을 해결하는데 기여 할 수 있을 것으로 기대된다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.25.2-25.2
• /
• 2010

CNT(Carbon Nanotube)는 특이한 구조 및 뛰어난 물성을 갖고 있어, 여러가지 분야에 응용 가능한 신소재로서 연구되어 왔다. 또한 모양 및 구조에 따라 기계, 전기, 화학적인 특성이 달라 다양한 분야에서 활용이 가능하다. 외국에서는 FED tip, TR, 디스플레이 소자, 수소저장체, 고강도 복합체 및 대 표면적 전극 등 CNT의 다양한 특성을 이용한 응용이 연구되고 있는 반면, 국내에서는 이론연구와 합성연구에 편중되어 있다. 본 연구에서는 열 화학 기상법 (Thermal CVD)을 이용하여 MWNT(Multi-wall nano tube)를 성장시켜 촉매두께, 온도, gas변수에 따른 CNT의 양상을 분석하였다. Ni catalyst는 DC magnetron sputter를 이용하여 5~50nm 두께로 증착하였으며, 성장온도는 $800^{\circ}C$에서 $950^{\circ}C$까지 변화시켰다. 기판의 pre-treatment 로 ammonia($NH_3$) gas를 주입한 후, carbon precursor인 methane($CH_4$) gas와 $H_2$ dilute gas를 1:4의 비율로 주입하여 CNT를 성장시켰다. FE-SEM과 TEM, 그리고 XRD를 이용해 성장된 CNT의 형상 및 구조를 분석한 결과, 낮은 온도에서는 100nm이상의 두께를 갖는 수직형상의 MWNT가 성장되었으며, $900^{\circ}C$이상의 높은 온도에서는 20nm이하의 amorphous carbon nano rod가 성장되었다. 각각의 MWNT, carbon nano rod는 온도가 높을수록 직경이 증가하는 추세를 나타냈으며, Ni catalyst가 얇아질수록 수직형상을 갖는 결과가 나타났다. 또한 ammonia gas의 pre-treatment여부에 따라 CNT의 수직 형상이 좌우되는 결과를 확인하였다. 향후 성장된 MWNT의 최적 조건을 도출하여 디스플레이 소자인 FED(Field Emission Display)분야 등에 응용 가능할 것으로 전망된다.

• 접착 및 계면
• /
• 제11권4호
• /
• pp.174-180
• /
• 2010

다중벽탄소나노튜브를 표면처리하여 polymethylmethacrylate (PMMA) 기재에 첨가하여 제조한 고분자 복합재료에서 탄소나노튜브의 표면처리가 계면 및 열전도도에 미치는 효과를 고찰하였다. Coagulation 방법과 atomic transfer radical polymerization (ATRP) 방법을 사용하여 탄소나노튜브를 표면 처리 하여 사용하였으며, ATRP 방법을 적용하여 제조한 복합재료는 coagulation 방법을 사용하여 제조한 복합재료보다 높은 열전도도와 투과도를 가졌다. 순수 PMMA의 열전도도가 0.21 W/mK인데 비하여 ATRP 방법으로 처리한 1 wt%의 탄소나노튜브를 첨가하였을 경우 0.38 W/mK로 열전도도가 향상되었다. 탄소나노튜브와 PMMA기재의 계면을 주사전자현미경을 이용하여 관찰한 결과 탄소나노튜브의 표면처리에 의해 기재 내에 분산이 향상되고 고분자기재-탄소나노튜브 계면에서의 접촉이 용이해져 포논산란이 감소되어 광 투과성을 가지면서 열전도도가 향상된 것으로 보인다.