• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.8-14
• /
• 2001

We develop a method to analyze dynamic behavior off multi-stage gear train system. The example system consists of three shafts supported by ball bearings at the ends of them and two pairs of spur gear set. For exact analysis, the meshing tooth pair of gear set is modeled as spring and damper having time-dependent meshing stiffness and damping. The bearing is modeled as spring. The result of this analysis is compared to that of other model having mean mesh stiffness. The effect of the excitation force by the unbalance off rotor off motor is also analyzed. Finally, the change ova natural frequency of the whole system due to the change of an angle between three shafts is compared in each case, and from this analysis, the avoiding angle for design is advised.

• 한국지진공학회논문집
• /
• 제21권5호
• /
• pp.227-236
• /
• 2017

This study reviews concepts, theories and formulas included in standards on soil-structure interaction and also shows practical example of application for engineers. Real structures are 3 dimensional and multi degree of freedom but they are often idealized to single degree of freedom for convenience. In this study, detailed procedures to calculate soil spring constants and damping coefficients and method to model soil-structure system are explained. Additionally, case studies to judge fixed base condition and evaluation of applicability of simple analysis method based on response spectra are performed.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.1883-1890
• /
• 2004

It is important to have a precise model for the clutch damper in order to simulate the entire powertrain of a vehicle and predict the responses of the system. In this research, we developed a new model in which the spring used in the clutch damper is divided into a finite number of elements. The model takes many unique properties of arc-shaped springs into consideration and is anticipated to be more precise than conventional simple models. With the model, two meaningful results were presented which can be utilized afterwards. One is a simulation concerning the peak torque transmitted via the clutch damper. The other is a simulation that shows the hysteretic characteristics of the clutch damper.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.409-414
• /
• 2007

Nowadays, with the advancement of computational mechanics, and vehicle dynamics simulation linked up with virtual testing laboratory(VTL) and virtual proving ground(VPG) technologies has become a useful method for analyzing numerous driving performances and diverse noise/vibration characteristics. In this paper, the analytical vehicle model based on multi-body dynamics theory was developed to investigate the vibration characteristics according to various road conditions. For the purpose, the whole vehicle parameters, each vehicle's part parameter, and part connecting elements such as spring, damper, and bush were measured by an experiment. Also, the vehicle dynamics model, which includes the front suspension, rear suspension, steering, front wheel, rear wheel, and body subsystems has been constructed for computer simulation. With the developed vehicle dynamics model, three forces and three moments measured at each wheel center were applied to evaluate and analyze dynamics and vibration characteristics for miscellaneous road conditions.

• 한국산업융합학회 논문집
• /
• 제20권5호
• /
• pp.431-439
• /
• 2017

Since the power transmission line(PTL) passes through the high mountain and heavy snowfall region, it is necessary to keep the stability of the PTL. In this study, PTL is modeled as a mass-spring-damper system by using RecurDyn. The lumped mass model is verified by calculated from the simulation comparing the deflection analysis according to the sag and tension. In order to analyze the dynamic behavior of PTL, a damping coefficient for a multi-body model is derived by using the free vibration test and Rayleigh damping theory. Sleet jump simulation according to the region is performed. The maximum jump height, icing sag and amount of jump are confirmed. Also, the amount of jump and the reaction force at the supporting point according to the tension and load of ice are analyzed, respectively. As a result, it is noted that the amount of jump and reaction force are influenced more by the load of ice than by the tension of PTL.

• 대한기계학회논문집A
• /
• 제34권8호
• /
• pp.1129-1136
• /
• 2010

체결클러치에 부착된 댐퍼스프링은 유체커플링에서 직결로 변환될 때 발생하는 엔진 토크의 진동을 흡수하는 역할을 한다. 본 연구에서는 체결클러치의 성능을 좌우하는 압축스프링 및 지지 판 구조물의 최적설계를 통해서 새로운 설계형상을 제안하였다. 체결클러치와 연결된 엔진, 변속기, 구동축 및 휠, 차체질량 등 주요 부품들을 다 포함하는 다물체 동역학모델을 구성하여 공진 회피에 필요한 스프링상수를 계산하였다. 또한 어닐링 모사법에 의한 스프링 최적설계코드를 개발한 후 스프링상수, 최대충격토크, 수축각도, 스프링개수, 피로강도 등을 입력하여 압축 스프링의 사양을 최적화하였다. 이들 스프링을 지지하는 3 가지의 판에 대해서 컴플라이언스를 최소화하고 체적비를 0.3 이하로 하는 위상최적화를 수행하여 새로운 형상을 제안하였다.

• 한국철도학회논문집
• /
• 제20권3호
• /
• pp.311-319
• /
• 2017

철도차량의 1차 현가장치는 윤축과 대차를 구속하는 장치로써 각 방향의 강성에 따라 차량의 동특성에 큰 영향을 미치며, 동특성을 향상시키기 위해서는 각 방향 강성을 다르게 요구하는데 일반적인 현가장치의 형상으로는 각 방향의 강성을 다르게 설계하기란 어렵다. 따라서 본 논문에서는 코니칼 러버 스프링(Conical rubber spring)을 이용하여 각 방향의 강성을 다르게 설계할 수 있도록 최적화 기법을 적용하여 목표값과 해석값의 RMS(Root Mean Square) 값을 이용하여 최적화를 수행하고 최적형상을 토대로 모델의 취약부의 형상을 보완하여 최종 모델을 제안한다. 실제 모델을 개발하여 정하중 시험을 통해 목표 강성값과 약 7.7%의 편차평균을 나타내 최적화 모델의 신뢰성을 입증하였다. 또한 최종 강성값을 다물체 동역학 모델에 적용하여 안정성과 곡선 주행성능 해석을 수행하였으며 적용모델의 임계속도는 대상 모델의 주행 최고속도인 110km/h 보다 높은 190km/h이며 차륜의 마모지수는 기존대비 34% 감소하여 조향 성능이 향상되었음을 확인하였다.

• 한국산업융합학회 논문집
• /
• 제20권5호
• /
• pp.419-424
• /
• 2017

The purpose of this study is to develop a virtual testbed capable of predicting the functional performance of a linear electromagnetic actuator for a high voltage relay in order to reduce its development costs and time. The virtual testbed is defined by a multiphysics coupling approach in order to consider the complex interactions of multi-domains such as the solenoid model of electromagnets, the mass-spring-damper model of mechanical systems, the electric circuit model for an external control unit, and the thermal model for predicting temperature variations. The performances of the existing high voltage relay were estimated by the virtual testbed, and then the effectiveness and validation of the proposed testbed were discussed in comparison with the experimental test results. This study showed that the virtual testbed can be applied in design, optimization, and investigation of high voltage relays.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.109-114
• /
• 2003

It is the common practice to reinforce excessively the secondary tunnel lining due to the lack of rational insights into the ground loosening loads. The main load of the secondary lining for drained-type tunnels is the ground loosening. The main cause of the load for secondary tunnel lining is the deterioration of the primary support members such as shotcrete, steel ribs, and rockbolts. Accordingly, the development of the analysis model to consider the ground-primary supports-secondary lining interaction is very important for the rational design of the secondary tunnel lining. In this paper, the interaction is conceptually described by the simple mass-spring model and the load transfer from the primary supports to the ground and the secondary lining is showed by the characteristic curves including the secondary lining reaction curve for the theoretical solution of a circular tunnel. And also, the application of this model to numerical analysis is verified in order to review the potential tool for practical tunnel problems with the complex conditions like non-circular shaped tunnels, multi-layered ground, sequential excavation and so on.

• 소음진동
• /
• 제7권5호
• /
• pp.853-860
• /
• 1997

For this study, the multi-degree of freedom analysis model of torsional vibration was developed. This model is combined with mass moment of inertia and torsional spring in two wheel drive and four wheel drive vehicle. We compared and analyzed torsional vibration characteristics by natural frequencies and mode shapes which are obtained by free vibration analysis of this model. And we studied torsional vibration contribution of driveline elements by performing the forced vibration analysis of engine excitation torque. The validity of this model is demonstrated by the field test. The reduction effect of the torsional vibration along the driveline design factor is presented by the analytical results.