• 산업기술연구
• /
• 제21권A호
• /
• pp.17-26
• /
• 2001

The fatigue strength of SM55C has significantly decreased by 83% compared with atmosphere where distilled exists due to strong erosive action of acid fog. The reason is inferred in a way that strong acid erosive material such as acid fog act and give rise to multi-site crack on the surface. Several fatigue clacks occurred under the acid fog repeat the process of division and unification on the surface and form a long non-propagating crack throughout the circumference of experimented steel. However, in the depth, many parts do not show much trace of unification, and the depth is not as big as the one of normal crack shape. 10% of $CaCl_2$ causes strong erosive reaction to material. Then eventually make the life of fatigue shooter. On the other hand, 20% of $CaCl_2$ beings about oxidized material organic crack closing due to weak erosive reaction.

• 한국건축시공학회지
• /
• 제1권2호
• /
• pp.174-178
• /
• 2001

This study was performed to control the thermal crack of the mat footing slab in the multi-purposed buildings. In this study, we executed the mixing design of concrete to satisfy the workability and the quality according to the site conditions. And, we evaluated quantitatively about the possibility of thermal crack by using hydration heat analysis system. Finally, we proposed the optimal mixing conditions, curing methods and curing period which all factors are considered. As a result, the optimal mixing conditions were : W/B 41%, unit binder 375kgf/$\textrm{m}^3$, FA replacement ratio 20%. Lowest thermal stress was 22.0kgf/$\textrm{cm}^2$ and at that time thermal crack index was over 1.5, when the coefficient of thermal conductivity was lowest among the curing conditions. And, the total curing time was estimated at 6.7 days according to curing steps.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.533-538
• /
• 2001

This study was peformed to control the thermal crack of the mat footing slab in the multi-purposed buildings. In this study, we executed the mixing design of concrete to satisfy the workability and the quality according to the site conditions. And, we evaluated quantitatively about the possibility of thermal crack by using hydration heat analysis system. Finally, we proposed the optimal mixing conditions, curing methods and curing period which all factors are considered. As a results, the optimal mixing conditions were : W/B 41%, unit binder 375kg/$cm^{2}$, FA replacement ratio 20%. Lowest thermal stress was 22.0kgf/$cm^{2}$ and at that time thermal crack index was over 1.5, when the coefficient of thermal conductivity was lowest among the curing conditions. And, the total curing time was estimated at 6.7 days according to curing steps.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.284-292
• /
• 2005

Material flaws in the from of pre-existing defects can severely affect the crack initiation. Stress distribution and crack initiation life of engineering materials such as monolithic aluminum alloy and Al/Glass fiber laminate may be different according to the defect location. The aim of this study is to evaluate effects of relative location of defects around the circular hole in monolithic aluminum and Al/Glass fiber laminates under cyclic bending moment. Stress distribution and crack initiation behavior near a circular hole are considered. Results of Finite Element (FE) model indicated the features of different stress field due to the relative defects positions. Especially, the defects positions at ${\theta}=0^{\circ}\;and\;{\theta}=30^{\circ}$ was strongly effective in stress concentration factor ($K_t$) and crack initiation behavior.

• 대한기계학회논문집A
• /
• 제31권3호
• /
• pp.344-354
• /
• 2007

The objective of this study is to investigate the effect of arbitrarily located defect around the circular hole in the aircraft structural material such as Al/GFRP laminates and monolithic Al alloy sheet under cyclic bending moment. The fatigue behavior of these materials may be different due to the defect location. Material flaws in the from of pre-existing defects can severely affect the fatigue crack initiation and propagation behavior. The aim of this study is to evaluate effects of relative location of defects around the circular hole in monolithic Al alloy and Al/GFRP laminates under cyclic bending moment. The fatigue behavior i.e., the stress concentration factor($K_t$), the crack initiation life($N_i$), the relationship between crack length(a) and cycles(N), the relationship between crack growth rate(da/dN) and stress intensity factor range(${\Dalta}K$) near a circular hole are considered. Especially, the defects location at ${\theta}_1=0^{\circ}\;and\;{\theta}_2=30^{\circ}$ was strongly effective in stress concentration factor($K_t$) and crack initiation life($N_i$). The test results indicated the features of different fatigue crack propagation behavior and the different growing delamination shape according to each location of defect around the circular hole in Al/GFRP laminates.

• 한국산업융합학회 논문집
• /
• 제8권3호
• /
• pp.161-168
• /
• 2005

This study is analysis for adjacent structures and ground movement by deep excavation work. Underground Inclinometer has shown that deformation of increment is minor within to allowable limit. According to the measurements result of slope and crack for adjacent structures, a detached house showed bigger than hospital structure to deformation of increment. Variation of underground water level didn't effect so much to ground and adjacent structures movement because underground water flows in rock and didn't give the water press to propped walls. Measurement data of strut variation is within tolerance limit. Because excavation site's wall was strengthened suitably. This study will contribute in establishment of measurement standard and information-oriented construction during deep excavation in multi-layered ground including rock masses.

• Advances in concrete construction
• /
• 제14권1호
• /
• pp.57-70
• /
• 2022

The spiral case concrete (SCC) used in the underground powerhouse of large hydropower stations is complex, difficult to pour, and has high requirements for temperature control and crack prevention. In this study, based on the closed-loop control theory of "multi-source sensing, real analysis, and intelligent control", a new intelligent cooling control system (ICCS) suitable for the SCC is developed and is further applied to the Wudongde large-scale underground powerhouse. By employing the site monitoring data, numerical simulation, and field investigation, the temperature control quality of the SCC is evaluated. The results show that the target temperature control curve can be accurately tracked, and the temperature control indicators such as the maximum temperature can meet the design requirements by adopting the ICCS. Moreover, the numerical results and site investigation indicate that a safety factor of the spiral case structure was sure, and no cracking was found in the concrete blocks, by which the effectiveness of the system for improving the quality of temperature control of the SCC is verified. Finally, an intelligent cooling control procedure suitable for the SCC is proposed, which can provide a reference for improving the design and construction level for similar projects.

• 산업기술연구
• /
• 제20권A호
• /
• pp.257-267
• /
• 2000

It was difficult to apply conventional excavation methods in some sections from Seoul to Pusan high speed rail road construction of 1 lot 2, due to highway concrete road, gas pipe, water pipe and nearby factories with automatic control system machine. To excavate safely and efficiently in these sections new blast patterns were employed within allowable blast vibration level, by test blast and controlled vibration by sequential blast. Behaviors of the rock mass including convergence and displacement around tunnel were measured with construction works and the crack width in concrete wall was also monitored for controlling allowable limits. The results can be summarized as follow : 1. The allowable blast vibration level in structure site is less 1.0cm/sec for highway concrete, 0.5 cm/sec for gas pipe, water pipe and building housing and 0.3 cm/sec for automatic control system machine. 2. The convergence displacement, single rod extensometer and multi rod extensometer around tunnel and cracks in concrete wall were measured, it was confirmed that the measured values were converged within allowable level. 3. The empirical formular of ground vibrations with 90% confidence lines for PD-3 was given as follow. $$V_{90%}=45.549({\frac{D}{\sqrt{W}}})^{-1.353}$$

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.243-254
• /
• 2019

본 연구에서는 지금까지 공동주택 지하주차장 상부 슬래브에 적용하여 누수하자가 발생된 방수공법들의 문제점과 상부 슬래브의 특성을 고려한 요구조건을 검토하고, 이에 적합한 성능(안)을 선정하여 복합형 폴리우레아 공법을 대상으로 그 적합성 여부를 판단하고자 하였다. 검토결과, 공동주택 지하주차장 상부슬래브에는 (1) 균열 및 거동 대응성, (2) 바탕면 일체성, (3) 수직부 수밀 안정성, (4) 누름층 시공 용이성, (5) 충격 및 누름 대응성, (6) 차량 이동하중에 대한 대응성 등의 성능검토가 필요하겠다. 연질, 경질의 복합형 폴리우레아를 대상으로 요구조건에 해당하는 5가지 항목에 대한 평가를 진행한 결과 모두 조건에 부합하는 것으로 확인되었으며, 단일 공법으로 적용함에 있어 문제점이 있던 재료들을 복합화 함으로서 각 재료의 장단점을 보완하여 효과적으로 적용할 수 있음을 확인하였다. 단, 실제 현장에 적용하기 위해서는 향후 Mock-up 평가 등 현장 적용성에 대한 추가적인 평가가 이루어져야 할 것이며, 복합화에 따른 경제성 및 유지관리성 측면에서의 검토를 통해 실제 시장 적용성 여부에 대한 후속적인 연구가 필요하겠다.

• 생명과학회지
• /
• 제25권2호
• /
• pp.237-242
• /
• 2015

탄산칼슘 형성세균에 의한 건축물 균열보수 및 그들의 내구성 증진은 기존 화학제에 비해 친환경적이며, 영구적이라는 측면에서 그들의 응용에 대한 연구는 중요한 위치를 차지하고 있다. 그러나 균열복구 기전이 세균의 대사에 의한 calcite crystal 형성과정에서 기인되는 것으로, 대사과정 중 산 형성으로 시멘트 기반 콘크리트 건축물에 대한 위해 가능성 논란이 지속 제기되었다. 따라서 본 연구는 시멘트 모르타르에 대한 생물학적 부식능이 있는 방제대상 미생물을 결정하고 시멘트 콘크리트 건축물에의 안전한 적용을 위한 다기능성 탄산칼슘 형성세균을 평가하기 위해 수행되었다. 이를 위해 첫째, 건축물에서 분리된 균사형 진균, 효모, 세균 균주들을 대상으로 chalky test를 실시하여 $CaCO_3$에 대한 가용화능을 평가하였다. 그 결과 건축물에서 분리된 세균 균주의 경우 가용화 능이 없는 것으로 평가되었으며, C. sphaerospermum KNUC253 및 P. prolifica KNUC263 균주가 $CaCO_3$에 대한 가용화 활성을 보여, 시멘트 기반 건축물 표면에서 방제되어야 균주로 판단된다. 둘째, 독도 토양 및 건축물에서 분리되어 시멘트 표면 진균생장 억제효과, 시멘트 표면균열을 수복 및 수분 침투력 감소효과가 보고된 특허등록 균주 A. nicotianae KNUC2100, B. thuringiensis KNUC2103, S. maltophilia KNUC2100 및 B. aryabhatti KNUC205들이 $CaCO_3$을 가용화하지 않음을 볼 때 산 형성으로 인한 시멘트 모르타르 주성분인 $CaCO_3$에 대한 위해는 없을 것으로 평가된다. 이에 더하여 그들 중 B. aryabhatti KNUC205, A. nicotianae KNUC2100의 경우 건축소재 열화가능성의 판단근거로 널리 활용되고 있는 bio-degradative assay에서 다양한 고분자물질 구성요소에 대해 활성을 나타내지 않아 다양한 건축환경에 대해 활용 가능성을 보여주었다.