• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.6
• /
• pp.67-76
• /
• 1997

In radar signal processing, an A/D converter with sufficient dynamic range and high sampling speed is required to detect the weakest target signals in heavy clutter and ECM environments. As the sampling frequency increases, the amount of digital data transfered to the signal processing module is also increased. To overcome these massive data transfer burden, we need an A/D conversion module with an enough data transfer rate. In this paper, we proposed an implementation scheme of a new A/D conversio module that can be used in multi-mode 3-D phased array radar signal processing system, and evaluated the performance. The proposed A/D conversion module is implemented with a standard A/D converter and a 6U-standard VME bus.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.1
• /
• pp.1-4
• /
• 2002

We studied the technique which can control the real system without additional hardware drivers using virtual machine driver operated on the windows operating system. We showed the feasibility of the proposed scheme under the error and the delay of a sampling time on the multi task processing through the load test of the experiment using graphic user interface.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.32-34
• /
• 2008

Latin Hypercube sampling strategy(LHS)는 출력변수에 의한 목적함수들의 기댓값의 추정을 위한 입력변수를 생성하는데 사용할 수 있는 샘플링 포인트 추출 방법으로, 샘플링 포인트의 "quality"를 향상시켜준다. multi-objective Pare optimization 에 근거한 LHS와 ($1+\lambda$) 진화기법으로 이루어진 최적화 algorithm을 제안 하였고, 이를 이용하여 6MW BLDC 전동기의 코깅토크를 최소화 하였다, 총 2단계의 최적 설계를 통해 초기형상의 코킹토크에 비해 19%로 감소하였다.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.408-413
• /
• 2011

In this paper, a real-coefficient approach to Adaptive Frequency Sampling (AFS) technique is developed for efficient equivalent circuit modeling of RF components. This proposed method is advantageous than the vector fitting technique and the conventional AFS method in terms of fewer samples leading to a lower order of a rational function on a given data and to a direct conversion to an equivalent circuit for PSPICE(Personal Simulation Program with Integrated Circuit Emphsis) simulation, respectively. To validate the proposed method, the distributed equivalent circuit of a presented multi-layered RF low-pass filter is obtained using the proposed real-coefficient AFS, and then comparisons with EM simulation and circuit simulation for the device under consideration are achieved.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.1
• /
• pp.52-60
• /
• 2008

Staggered dimples printed on opposite walls of an internal cooling channel are formulated numerically and optimized to enhance heat transfer performance. Nusselt number and friction factor based objectives are considered and a weighted average surrogate model is used to approximate the data generated by numerical simulation. The dimpled channel shape is defined by three geometric design variables, and the design point within design space are selected using Latin hypercube sampling. A weighted-sum method for multi-objective optimization is applied to integrate multiple objectives into a single objective. By the optimization, the objective function value is improved largely and heat transfer rate is increase much higher than pressure loss increase due to shape deformation. Channel with vertically non-symmetric optimum dimples is tested and found that the best appears if dimples on opposite wall are displaced by one quarter of dimple spacing.

• ETRI Journal
• /
• v.34 no.3
• /
• pp.369-378
• /
• 2012

In this paper, we propose new adaptive search range motion estimation methods where the search ranges are constrained by the probabilities of motion vector differences and a search point sampling technique is applied to the constrained search ranges. Our new methods are based on our previous work, in which the search ranges were analytically determined by the probabilities. Since the proposed adaptive search range motion estimation methods effectively restrict the search ranges instead of search point sampling patterns, they provide a very flexible and hardware-friendly approach in motion estimation. The proposed methods were evaluated and tested with JM16.2 of the H.264/AVC video coding standard. Experiment results exhibit that with negligible degradation in PSNR, the proposed methods considerably reduce the computational complexity in comparison with the conventional methods. In particular, the combined method provides performance similar to that of the hybrid unsymmetrical-cross multi-hexagon-grid search method and outstanding merits in hardware implementation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.1
• /
• pp.54-59
• /
• 2006

The smart space is composed of the wire and/or wireless network, multi-sensor-based environment, and many various controllers. For the smart space, this paper presents a new design method of multirate digital decentralized controller using the intelligent digital redesign technique. In specific, the proposed method is based on the delta-operator and the multirate sampling and takes the form of the LMIs. To shows the feasibility of the suggested method, the computer simulations for Heating, ventilating, and ai. conditioning (HVAC) system are provided.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.3
• /
• pp.349-355
• /
• 2015

A fully-differential touch-screen sensing architecture is presented to improve noise immunity and also support most multi-touch events minimizing the number of amplifiers and their silicon area. A correlated double sampling function is incorporated to reduce DC offset and low-frequency noises, and a stabilizer circuit is also embedded to minimize inherent transient fluctuations. A prototype of the proposed readout circuit was fabricated in a $0.18{\mu}m$ CMOS process and its differential operation in response to various touch events was experimentally verified. With a 3.3 V supply, the current dissipation was 3.4 mA at normal operation and $140{\mu}A$ in standby mode.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.4
• /
• pp.143-147
• /
• 2007

This paper presents various interval estimation methods of binomial proportion for small n in multi-product small volume production and extremely small ^P like PPM or PPB fraction of defectives. This study classifies interval estimation of binomial proportion into three categories such as exact, approximate, Bayesian methods. These confidence intervals proposed in this paper can be applied to attribute process capability and attribute acceptance sampling plan for PPM or PPB.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.2
• /
• pp.152-156
• /
• 2007

This paper proposes a method for real-time control of both capacitors and ULTC in a distribution system to reduce the total power loss and to improve the voltage profile over the course of a day. The multi-stage consists of the off-line stage to determine dispatch schedule based on a load forecast and the on-line stage generates the time and control sequences at each sampling time. It is then determined whether one of the control actions in the control sequence is performed at the present sampling time. The proposed method is presented for a typical radial distribution system with a single ULTC and capacitors.