• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1225-1227
• /
• 1996

In this paper, we delelop 4-axis motion controller using TMS320c30 DSP chip and build a 5-axis vertical articulated robot control system. The 4-aixs controller uses a DSP, a high-speed AID and a D/A converter to implement advanced robot control algorithms. The robot control system uses VME-bus and VxWorks realtime multi-tasking operating system. We use RCCL type to implement robot languages.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.235-243
• /
• 2012

In this study, we developed two legged multi-joint robot by using wireless servo motor that was applied by wireless sensor network technology, which is widely used recently, and performed an experiment of walking method of two legged multi-joint robot. We constructed the star network with servo motors which were used at each joint of two-legged robot. And we designed the robot for operation by transmission of joint control signal from main control system or by transmission of the status of each joint to the main control system, so it operates with continuously checking the status of joints at same time. We developed the humanoid robot by using wireless digital servo motor which is different from existing servo motor control system, and controlled it by transmitting the information of angles and speeds of robot joints to the motor(node) as a feedback through main control system after connecting power and setting up the IDs to each joint. We solved noisy problem generated from wire and wire length to connection point of the control device by construction of the wireless network instead of using existing control method of wiring, and also solved problem of poor real time response to gait motion by controlling the position with continuous transmission of control signals to each joint. And we found that the effective control of robot is able by performing the simulation on walking motion in advance with the developed control algorithm which was downloaded into installed memory. Also we performed the stable walking with two-legged robot by attaching pressure sensor to robot sole. And we examined the robot gait operated by application of calculated algorithm on robot movement to each joint. In this study, we studied the method of controlling robot gait motion by using wireless servo motors and measured the torque applied to each joint, and found that the developed wireless servo motor by ZigBee sensor network offers easier control of two legged robot gait and better circuit configuration of it than the existing wired control system could do.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1938-1943
• /
• 2005

Network human-robot interface is an important research topic. In home application, users access the robotic system directly via voice, gestures or through the network. Users explore a system by using the services provided by this system and to some extend users are enable to participate in a service as partners. A service may be provided by a robot, a group of robots or robots and other network connected systems (distributed sensors, information systems, etc). All these services are done in the network environment, where uncertainty such as the unstable network connection, the availability of the partners in a service, exists. Moreover, these services are controlled by several users, accessing at different time by different methods. Our research aimed at solving this problem to provide a high available level, flexible coordination system. In this paper, a multi-agent framework is proposed. This framework is validated by using our new concept of slave agents, a responsive multi-agent environment, a virtual directory facilitator (VDF), and a task allocation system using contract net protocol. Our system uses a mixed model between distributed and centralized model. It uses a centralized agent management system (AMS) to control the overall system. However, the partners and users may be distributed agents connected to the center through agent communication or centralized at the AMS container using the slave agents to represent the physical agents. The system is able to determine the task allocation for a group of robot working as a team to provide a service. A number of experiments have been conducted successfully in our lab environment using Issac robot, a PDA for user agent and a wireless network system, operated under our multi agent framework control. The experiments show that this framework works well and provides some advantages to existing systems.

• Journal of Korea Multimedia Society
• /
• v.16 no.6
• /
• pp.689-699
• /
• 2013

There are four methods such as 1:1, 1:N, N:1, and N:N in the tele-operating system for control the remote side robot. The operator must know the information of surroundings of the robot, collision possibility of the mobil equipment, and force feedback of the manipulator. The time delay problem occurs in the tele-operating and it causes vibration and expressive power of the manipulator owing to bidirectional force feedback. N:N control technique having been developed lately has a switching algorithm for the operator to select the target robot or it's partial equipment. When multi-operators work together to accomplish a task with multi-robots, the switching facility must be offered. And the automatic tuning skill to generalize the operator's tendency is needed also. We describes the methodologies and skills for developing a haptic-based tele-operating environments to makes it possible to control the remote multi-robots with multi-operators in this paper.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.217-224
• /
• 2009

The traditional small educational multi-joint robots were developed on firmware. In these system's case, we cann't give a chance to educate good practices due on executing just robot's simple movements. But it may be possible for RTOS to control the elaborate movement of the robot with assembling each part on firmware. With this RTOS, we can enhance the efficiency of robot's movements, but too difficult to use the education as increasing the complexity of robot system. To solve the problem, we apply with Design pattern and Refactoring for the Education. Applying robot's design with Design pattern and Refactoring. There may be easily understand what and how to design RTOS for any level ones. We may easily change/upgrade RTOS for new system with this approach. This paper mentions to design RTOS with Design patterns and to apply RTOS's source code with Refactoring.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.321-325
• /
• 1986

A new control scheme for the state space model of the robot system using the theory of optimal multi-variable structure is presented in this paper. It is proposed to optimize multi-dimensional variable structure systems for obtaining the required stabilizing signal by minimizing a performance index with respect to the state vector in the sliding mode. It is concluded the proposed variable structure controller yields better system dynamic performance than that obtained by using the only linear optimal controller inthat responses for a step disturbance have a shorter setting time, no matter what overshoot values and rising time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8933-8939
• /
• 2015

In this paper, we designed a multi humanoid robot control method for performing an exhibition that will maximize the efficiency and user convenience and implementation. In recent years, an increasing number of case and to take advantage of the robots in the field performances and exhibitions, plays, musicals, orchestra performances are also various genres. In concert with the existing small humanoid exhibition to source from outside by using a computer and MP3 player and play, while pressing the start button of communication equipment for the show to start the robot began performing with the zoom. Thus, due to the dual source and robot operation and synchronization does not work well is the synchronization of the start of the concert sound starting point of the robot and robot motion and sound are reproduced separately were frequently occurs when you need to restart the show. In addition, when the center of gravity or lose the robots who were present during the performance problems such as performance or intervene to restart the show. In order to overcome this, in this paper, Multi-small humanoid robot was designed to control the efficiency and the user of the GUI-based human interface S/W to maximize convenience, Zigbee communication to transmit a plurality of data in al small humanoid It was used. In addition, targeting a number of the small humanoid robot demonstrated the effectiveness and validity of the user's convenience by gender actual implementation.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.3
• /
• pp.34-40
• /
• 2001

Robot manipulator has highly nonlinear dynamics. Therefore the control of multi-link robot arms is a challenging and difficult problem. In this paper a decentralized adaptive fuzzy sliding mode scheme is developed for control of robot manipulators. The proposed scheme does not require an accurate manipulator dynamic model, yet it guarantees asymptotic trajectory tracking despite gross robot parameter variations. Numerical simulation for decentralized control of a 3-axis PUMA arm will also be included.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.518-521
• /
• 1995

In this paper, a learning control problem is formulated for cooperating multiple-robot manipulators with uncertain system parameters. The commonly held object is also assumed to be unknown and the multiple-robots themselfs experience uncertain operating conditions such as link parameters, viscous friction parameters, suctions, actuator bias, and etc. Under these conditions, the learning controllers designed for learning of uncertain parameters and robot control inputs for multiple-robot systems are shown to drive the multiple-robot manipulators to follow the desired Cartesian trajectory with the desired internal forces to the unknown object.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.5 s.170
• /
• pp.87-94
• /
• 2005

This paper presents the development of a virtual robot design program. Robot design requires numerical software, robot solution software and multi-body dynamics software to complete several designs. However using a commercialized software implies some disadvantages, such as the waste of time and money it costs to learn how to use the software. We developed a virtual robot design program with which a user can design a robot with rapidity and reliability. The virtual robot design program is composed of robot kinematics module and robot dynamics module. The program is powerful software which may be used to solve various problems of a robot. The 3D animator and a 2D/3D graph of the program can analyze the design results into visual data. The virtual robot design program is expected to increase the competitiveness and efficiency of the robot industry.