In order to prevent the corrosion of component contacted primary water designed alloy 600 material in the nuclear power plant. But the primary water stress corrosion cracking(PWSCC) of alloy 600 and weld area occurs continuously due to the residual stress. The leakage accident resulted from PWSCC in the drain nozzle of the steam generator of domestic power plants. Heater sleeves of the pressurizer are welded with alloy 600 weld material and therefore exposed to the primary water environment. PWSCC occurred in heater sleeve material and weld area of many foreign power plants. The current issue of domestic nuclear power plants are consequently concentrated to PWSCC of similar material. In order to improve the detection and the sizing of the PWSCC in the welding sleeve of the pressurizer, the automatic UT system and multi-directions probe sets have been developed. The experimental studies have been performed using the mock-up block containing artificial reflectors(ID connected EDM notch) and semi-artificial cracks made from thermal fatigue. The automatic UT System is applied in the detection and the length sizing of the ID/OD on the tube and the J-groove weld area of the artificial reflectors and results of the detection and the sizing are compared respectively. Also, the developed automatic UT system is successfully accomplished to inspect the heater sleeve and the J-groove weld area on the pressurizer for the detection of PWSCC.
Several research works for finding and optimizing the methods of dispensing high viscosity phosphor used in the fabrication of white LED's are currently in progress. High viscosity phosphor dispensing with a high accuracy is crucial because the dispensing rate and uniformity directly affect parameters such as the CIE chromaticity diagram, color temperature and luminous flux of white LED's. This study presents a novel method of dispensing high viscosity phosphor using electrohydrodynamic printing. The dispensing rate was optimized less than 0.01 mg phosphor using experiments and optimizing the process parameters including the standoff distance from the nozzle to the substrate, ink supply pressure, and multi-step pulsed waveform magnitude ratio. The dispensing rate was measured by dispensing 20 dots using drop-on-demand with the optimized parameters, and the experiments were repeated 10 times to maximize the data accuracy. The average dispensing rate that can be reliably used for high viscosity phosphor dispensing was 0.0052 mg.
본 논문은 석재의 표면 마감 시 다양한 패턴의 무늬를 가공하기 위한 전용기에 대한 연구이다. 기존의 평범한 무늬에 대하여 기능 및 예술성을 부여하여 석판의 활용 범위를 확대 발전시키고자 한다. 이에 본 연구에서는 Water-Jet을 이용하여 석재의 표면 가공 시 다양한 패턴에 대한 적용이 가능한 전용기를 개발하였다. 전용기는 석판을 이송하는 이송 기구, 다양한 패턴 무늬 생성을 위한 노즐 이송 기구, 초고압수를 이용한 멀티노즐 기구, 모션 제어를 위한 제어시스템, 그리고 패턴 무늬 선택을 위한 S/W로 구성되어 있다. 개발되어진 전용기에 대한 다양한 패턴 무늬에 대한 실험을 통하여 성능 평가를 하였다. 이를 통하여 다양한 종류의 패턴 무늬 가공이 가능하며, 가공 오차 ${\pm}0.5mm$의 정밀도를 갖는 전용기를 개발하였다.
본 논문은 오존 방식 선박평형수 처리의 핵심 장치인 이젝터에 대하여 회전 운동하는 구동 유체가 기체-액체 이젝터의 효율에 미치는 영향에 관한 연구이다. 이젝터는 오존을 구동 노즐을 통해 분사되는 고압 액체(선박평형수)와 주변부의 저압 기체 간의 운동량 교환으로 발생되는 부압에 의해 기체(오존)를 흡입시키는 장치이다. 기존의 이젝터는 단순한 형태로 구동 유체가 분사되지만, 본 논문에서는 구동 노즐부에 회전 유도장치를 적용하여 구동 유체가 회전 운동하며 분사될 수 있도록 한다. 구동 유체의 회전 운동 유무에 따른 유동 특성을 파악하기 위하여 전산유체해석을 이용하였으며, 구동 유체의 압력과 유량, 흡입부에 발생하는 흡입 유체의 부압과 흡입 유량, 그리고 토출 압력이 예측되었다. 그 결과를 바탕으로 회전유도 장치가 적용된 이젝터의 효율은 22.25%로 산출되었으며, 구동 유체의 회전 운동이 없는 이젝터에 비해 약 1.7%의 효율이 향상되었다. 마지막으로 전산유체해석의 타당성을 검증하고자 실험 장치를 구축하여 회전 유도 장치가 적용된 이젝터에 대한 실험을 수행하였으며, 전산유체해석 결과와 비슷한 결과를 얻을 수 있었다.
본 논문에서는 Part I에 소개된 요소모델들을 통합하여 핀틀 추력기 성능 특성을 분석하였다. 성능해석 모델 검증을 위하여 케로신/과산화수소 액체 핀틀 추력기의 실험결과와 비교 분석하였다. 검증한 결과를 바탕으로 핀틀 추력기 내부의 비정상 열유동장의 물리적 특성을 분석하였으며 필름효과를 확인하였다. 또한 추력기의 형상인자와 작동인자가 성능특성에 미치는 영향을 파악하기 위하여 OAT 방법과 scatter plot 방법을 이용해 민감도 분석을 수행하였다. 액적직경, 필름유량, O/F비, 노즐목 직경의 4가지 인자를 이용해 특성속도, 연소실 압력, 비추력의 변화에 대한 영향을 관찰하였다.
Pressure relief valve (PRV) is one of the important control valves used in nuclear power plants, and its sealing performance is crucial to ensure the safety and function of the entire pressure system. For the sealing performance improving purpose, an explicit function that accounts for all design parameters and can accurately describe the relationship between the multi-design parameters and the seal performance is essential, which is also the challenge of the valve seal design and/or optimization work. On this basis, a surrogate model-based design optimization is carried out in this paper. To obtain the basic data required by the surrogate model, both the Finite Element Model (FEM) and the Computational Fluid Dynamics (CFD) based numerical models were successively established, and thereby both the contact stresses of valve static sealing and dynamic impact (between valve disk and nozzle) could be predicted. With these basic data, the polynomial chaos expansion (PCE) surrogate model which can not only be used for inputs-outputs relationship construction, but also produce the sensitivity of different design parameters were developed. Based on the PCE surrogate model, a new design scheme was obtained after optimization, in which the valve sealing stress is increased by 24.42% while keeping the maximum impact stress lower than 90% of the material allowable stress. The result confirms the ability and feasibility of the method proposed in this paper, and should also be suitable for performance design optimizations of control valves with similar structures.
순산소 연소와 배가스 재순환(FGR : Flue Gas Recirculation) 기술은 $CO_2$ 저감 목적으로 많은 연구자들의 관심을 받아왔다. 본 연구는 다공 동축 버너를 이용하여 산소 공급비(OFR : Oxygen Feeding Ratio)에 따른 순산소 연소 특성과 동일 조건에서 FGR 시스템을 모사하기 위하여 공급 위치에 따른 $CO_2$ 첨가 효과의 특성을 비교하는 데에 초점을 맞추었다. 순산소 연소는 당량비 0.93 에 해당하는 연료 유량 15lpm 일 때 OFR 전 영역에서 안정적이었고, 화염 구조와 길이는 OFR 에 따라 변동하였다. 순산소 연소에 $CO_2$ 를 첨가할 때, 안정, 천이, 준평형, 불안정 그리고 날림 등의 다양한 안정화 모드가 관찰되었으며, 연소로 내의 전반적인 온도분포가 감소하였고, 특히 case 4 에서 1800 K 이하로 떨어져 최대 감소 효과를 보였다. 노즐 끝단으로부터 높이에 따른 $CO_2$ 농도는 첨가된 $CO_2$ 의 체적 비율에 따라 변동하였다.
최근 고속철도, 지하철, 댐, 항만, 고속도로, 도심지의 주상복합건물 등 대형 건설공사가 진행되면서 약액주입공법, 고압분사주입공법, 혼합처리공법 등이 다양하게 적용되고 있으나 침투성, 강도, 내구성, 환경성, 주변지반의 융기, 지하매설물에 대한 영향, 산업폐기물발생 등 많은 문제점이 지적되어 왔다. 이에 본 연구에서는 특수 주입선단장치 및 변성실리케이트 재료를 개발하여 주입재료의 혼합이 용이하고 주입중 주입재의 역류 및 주입노즐의 막힘이 없이 연속작업이 가능하며, 분말도 $6,000cm^2/g$이상인 마이크로시멘트를 사용 침투효과를 증가시켰다. 또한, 겔형성반응재는 내구성과 환경성에 영향을 끼치는 $Na_2O$ 함량을 대폭 낮춘 변성실리케이트를 개발하여 지하수에 의한 용탈현상을 최소화하고, 장기의 고강도, 고침투, 고내구성, 친환경성이 요구되는 곳에 적합한 마이크로 무기질급결재를 개발하여 실용화에 대한 연구를 수행하였다. 연구결과 일축압축강도, 투수성, N치 및 TCR, RQD 등이 개선됨을 알 수 있었으며, 향후 본 연구결과를 바탕으로 특수 주입선단장치를 활용한 다양한 현장적용성 시험을 추후 시행하여 타공법과 공학적 특성을 비교, 검토하고자 한다.
본 연구에서는 미생물 반응으로 생성된 탄산칼슘을 현장조건과 유사한 장비로 제작하여 모래지반에 주입함으로 모래지반의 강도 개선 및 주입범위를 평가하고자 하였다. 본 연구를 분석하기 위해 단층토(Sand, SP, SW)는 D 150mm ${\times}$ H 200mm로 3가지 case를 제작하였고, 다층토(SW/SP, SP/SW)는 D 150mm ${\times}$ H 300mm로 제작하여 2가지 case를 Dr 30%인 연약지반으로 제작하여 1일 동안 주입실험을 수행하였다. 포켓관입시험기로 일축압축강도를 측정하였고, 주입노즐 주변의 구근형성을 통해 주입범위를 살펴보았다. 또한, XRD분석 통해 공시체내의 성분분석을 진행하였다. 그 결과, 다층토에서 SP/SW에서 전구간에 걸쳐 약 500kPa의 강도와 15cm 두께의 고결을 확인하였다. 이는 바이오그라우팅 기술이 지반의 간극 상태와 크기에 따라 주입 효과에 상당한 영향이 있음을 확인 할 수 있었다.
The concentration characteristics of atmospheric particle matters (PM) including $PM_{2.5},\;PM_{10}$, and TSP were evaluated through the measurement data of PM_{2.5}$ (fine particulate), PM_{10-2.5}$ (coarse particulate), and PM_{over-10}$ collected using a MCI (multi-nozzle cascade impactor) sampler of a three-stage filter pack in spring of 2006 in Iksan area. During the sampling period of 10-15 March and 24 days from 8 April to 2 May, 32 samples for PM of each size fractions were collected, and then measured for PM mass concentrations and water-soluble inorganic ion species. Average concentrations of $PM_{2.5},\;PM_{10}$, TSP were $57.9{\pm}44.1mg/m^3$, $96.6{\pm}89.1mg/m^3$, and $114.8{\pm}99.7mg/m^3$, respectively. Water-soluble inorganic ion fractions to PM mass were found to be 36.5%, 18.0%, and 11.1% for $PM_{2.5}$, $PM_{10-2.5}$ and $PM_{over-10}$, respectively. By showing the high concentrations of PM samples during Asian dust events, those three fractions of PM were distinguished between the samples of Asian dust event and the samples of no event. However, the increase of PM concentrations observed during Asian dust events showed a different pattern for some Asian dust events. The differences of those three fractions in the size distribution may depend on differences on place of occurrence of Asian dust storm and course of transport from China continent to Iksan area in Korea. However, the extent of PM mass contribution during Asian dust events was generally dominated by the coarse particles rather than the fine fraction of PM. The variations of water-soluble inorganic ion species concentration in those three PM fractions between the samples of Asian dust event and the samples of no event were also discussed in this study.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.