• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.113.3-113
• /
• 2001

In this paper, we have designed the VHDL module of DS/SS QPSK wireless modem processor for digital data communication. The spread spectrum method is used for modern processor, because this method guarantees good frequency efficiency and higher security. Also, it guarantees good performance in digital communication system under multi-path interferences. The differential encoder and decoder are used for simple circuit composition in the signal detection. For the synchronization of receiver, matched filter and power detector are used. And the IF modulation/demodulation of QPSK method is used in the digital level. The transmitter of VHDL modem processor consists of differential encoder, PN code generator, and QPSK ...

• 전자공학회논문지A
• /
• 제33A권11호
• /
• pp.19-31
• /
• 1996

Spread spectrum method gurantees good performance in digital communication system under multi-path interference and jamming signals. The purpose of this paper is to develop the wireless modem using DS/SS techinque. The transceiver consists of a spread spectrum DQPSK transmitter and a mtching receiver. The system operates with the chipping rate set to 4 Mcps and the number of chips/symbol at 64, making the data rate 62.5 Kbps using QPSK modilation. The receiver section uses a digital matched filter for fast acquisition of burst signals and uses the comparing the BER of proposed system iwth that of narrow bnd system under various additive white gaussian noises. It is showen that the proposed sysem has better performance than narrow band system. When jamming signals is added to the suggested DS/SS system, we also show that the experimental performance (BER) of the suggested wireless modem is almost same as theroretical performance.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.7-10
• /
• 2010

In this paper, we design a modem SoC (System on Chip) for low power consumption and high speed wireless communications. Among various schemes of high speed communications, an MB-OFDM (Multi Band-Orthogonal Frequency Division Multiplexing) UWB (Ultra-Wide-Band) chip is designed. The MB-OFDM uses wide-band frequency to provide high speed data rate. Additionally, the system imposes no interference to other services. The 90nm CMOS (Complementary Metal-Oxide Semiconductor) technology is used for the SoC design. Especially, power management mode is implemented to reduce the power consumption.

• 한국의상디자인학회지
• /
• 제13권4호
• /
• pp.167-177
• /
• 2011

As today the world has been globalized, each country and race has been trying its best to preserve and develop its own unique culture to have its identity. Same exertion has been added in the areas of fashion and textile such as developing traditional textile or fabrics and applying them to the materials of modem fashion. The Korean traditional gold foil is one of invaluable cultural heritages, and another means to elevate the wearer's social status, and its beauty and artistic quality is very excellent. So, in order to preserve and develop of the Korean traditional gold foil, the exertion of developing the gold foil into multi-purpose modem fashion material which is endurable and practical by using the image of Korean traditional gold foil should be done. The purposes of this study are to preserve Korean traditional gold foil, to develop Korean textile and fashion industry by utilizing Korean traditional gold foil images in modem fashion. The results are as follows: textile designs applied plant motives of Korean traditional gold foil were carried out, modem fashion materials of Korean traditional gold foil image were developed by Jacquard weave. They were to certify that those were registered on the register of the Korean of design registrations from commissioner the Korean Intellectual Property Office, and developed fabrics of Korean gold foil image were examined the utility for modern fashion materials through using them in the modem wearing, interior goods and fashion items.

• 제어로봇시스템학회논문지
• /
• 제15권3호
• /
• pp.346-352
• /
• 2009

UTC (Coordinated Universal Time) has been made by the comparison results and the statistical analysis of primary clocks maintained by national standard institutes. Some kinds of technique have been used for international time transfer; since 1980s the study on methods and development of time transfer has conducted with activation of GPS application. And the more accurate and easier method made it use the official time transfer method for the generation of UTC. But recently TWSTFT (Two-Way Satellite Time and Frequency Transfers) as well as GPS time transfer are increasing in number because the TWSTFT is able to improve the accuracy and precision of time comparison owing to the elimination of the ionospheric and tropospheric delay errors thanks to the reciprocal propagation path. In this paper, we introduce the TWSTFT results by a multi-channel modem comparing with GPS P3-code.

• 한국군사과학기술학회지
• /
• 제14권2호
• /
• pp.222-231
• /
• 2011

In this paper, we have proposed a method which can make it possible to stably transmit and receive data like the ARC-164 radio frequency hopping environment as a S/W packet modem with PSK modulation. This is a method that the S/W packet modem with PSK digital modulation and the use of PC sound cards change over from data to voice signals and then transmit/receive data. We confirmed not only that it is possible to solve the slow speed communication with the use of sending data through multi-channels and PSK modulation that has the ability to methodically improve transmission rates, but also that it is possible to send the state of frequency hopping stably. In conclusion, we've confirmed both tactical values that though the transmission rate may be a tad slow, a state of frequency hopping of more than 94% confidence plus voice and data can be sent via radio at the same time. In this paper, the proposed S/W packet modem is only an implemented S/W component, so when we apply it to aircraft that we don't consider EMC problems with, then we have the advantage of a wider use of conventional UHF/VHF/HF radio that is possible to voice communication. If we recognize these operational requirements, we can apply for a lot of field equipment efficiently.

• 한국항행학회논문지
• /
• 제14권3호
• /
• pp.328-335
• /
• 2010

본 논문에서는 2개의 송수신 안테나를 갖는 $2{\times}2$ MIMO-OFDM 기반 무선 LAN 기저대역 수신 모뎀을 위한 효율적인 수신 알고리즘 및 면적 효율적인 하드웨어 구조를 제시한다. 수신기 성능향상을 위해 효율적인 시간 동기 알고리즘과 MML 알고리즘 기반 MIMO 심볼 검출기 구조를 제안한다. 또한, 제안된 심볼 검출기는 IEEE 802.11n 무선 LAN 규격에 정의된 대로 MIMO 전송 기법 중 공간 다이버시티 모드뿐 아니라 공간 다중화 모드를 모두 지원하며, 다단 (multi-stage) 파이프라인 구조와 극좌표 형태의 복소수 승산 방법을 사용하여 연산블록의 공유와 연산기의단순화를 진행하였고, 이를 통해 하드웨어 복잡도를 크게 감소시켰다. 제안된 하드웨어 구조는 하드웨어 설계 언어(HDL)를 이용하여 설계 되었고, 0.13um CMOS standard 셀 라이브러리 통해 합성되었다. 그 결과 기존의 설계 구조와 비교시 56% 감소된 하드웨어 복잡도로 구현 가능함을 확인하였다.

• 대한전자공학회논문지SD
• /
• 제45권3호
• /
• pp.86-93
• /
• 2008

다양한 무선 통신 표준 규격을 수용하는 멀티모드 단말기 모뎀은 가변적인 워드 길이와 광범위한 데이터율을 처리한 수 있는 다기능 산술 연산 회로를 필요로 한다. 일반적으로 이런 목표를 위한 하드웨어는 요구되는 최고 성능을 달성하도록 설계되어지므로 종종 전력 소모 측면에서 낭비적인 요소가 있으며 특히 낮은 데이터율에서 심화되는 경향이 있다. 따라서 동작 속도와 전력에 적합한 산술 연산 치로는 무선 통신 응용 분야에서 매우 필수적인 요소이다. 본 논문에서는 계층적인 캐리스킵 로직을 기본 구성 블록으로 하는 전력 효율적 다기능 가산기 구조를 제안하고 다양한 동작 모드에서의 면적, 성능, 전력 효율을 보임으로써 효과를 입증하였다.

• 대한의용생체공학회:의공학회지
• /
• 제29권3호
• /
• pp.191-197
• /
• 2008

This research focused on the development of wireless telemetry system that can monitor heart rates of multiple rehabilitation patients in real time without constraint. The whole system consists of the multiple patient's side devices (PSDs) and one central monitoring system (CMS). The PSD consists of a microphone, amplifier, filter, microcontroller, and RF (Radio Frequency) modem. In addition, the PSD was designed to be wearable and low power consumption. The CMS consists of an RF modem and general PC and it was designed to monitor heart rates from multiple patients simultaneously. The system warns an alarm signal when a patient's heart rate exceeds the pre-set range for each patient. This system can be useful to monitor the heart rate of exercising rehabilitation patients and control the patients condition and the exercising level.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.238-241
• /
• 2007

We present an innovative method of multi-physics application involving energetic materials. Energetic materials are related to reacting flows in extreme environments such as fires and explosions. They typically involve high pressure, hish temperature, strong non-linear shock waves, and high strain rate deformation of metals. We use an Eulerian methodology to address these problems. Our approach is naturally free from large deformation of materials that makes it suitable for high strain-rate multi-material interaction problems. Furthermore we eliminate the possible interface smearing by using the level sets. We have devised a new level set based tracking framework that can elegantly handle large gradients typically found in reacting gases and metals. We show several work-in-progress applications of our algorithm including the Taylor impact test, explosive venting and additional confined explosion problems of modem interest.