• 전기학회논문지
• /
• 제60권2호
• /
• pp.431-434
• /
• 2011

In this paper, bandwidth enhanced design of dielectric resonator antenna fabricated in multi-layer substrate is introduced. The proposed dielectric resonator antenna is operating with fundamental TE101 mode and higher-order TM111 mode. Each resonance frequency is dependent on resonator dimensions. As increasing the height of radiating aperture, the higher-order TM111 mode resonance frequency approach the fundamental TE101 mode resonance frequency and the antenna bandwidth increase by double resonance. Three different aperture height size antennas that operated at 7GHz are fabricated in FR4 multi-layer substrate. Measured 10 dB matching bandwidth is 8 percent for single resonace antenna and 18 percent for double resonance antenna.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.840-845
• /
• 2005

This paper presents a robust optimal design method for a periodic structure type of MEMS resonator that is vulnerable to mode localization. The robust configuration of such a MEMS resonator to fabrication error is implemented by changing the regularity of periodic structure. For the mathematical convenience, the MEMS resonator is first modeled as a multi pendulum system. The index representing the measure of mode variation is then introduced using the perturbation method and the concept of modal assurance criterion. Finally, the optimal intentional mistuning, minimizing the expectation of the irregularity measure for each substructure, is determined for the normal distributed fabrication error and its robustness in the design of MEMS resonator to the fabrication error is demonstrated with numerical examples.

• 한국소음진동공학회논문집
• /
• 제15권8호
• /
• pp.931-938
• /
• 2005

This paper presents a robust optimal design method for a periodic structure type of MEMS resonator that is vulnerable to mode localization. The robust configuration of such a MEMS resonator to fabrication error is implemented by changing the regularity of periodic structure For the mathematical convenience, the MEMS resonator is first modeled as a multi-pendulum system. The index representing the measure of mode variation is then introduced using the perturbation method and the concept of modal assurance criterion. Finally, the optimal intentional mistuning, minimizing the expectation of the irregularity measure for each substructure, is determined for the normal distributed fabrication error and its robustness in the design of MEMS resonator to the fabrication error is demonstrated with numerical examples.

• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.81-87
• /
• 2000

A new resonator that is fabricated by single polysilicon layer process is presented. The resonator can move in two orthogonal direction on the plane parallel to the substrate. And the resonant frequencies of the two modes are intrinsically designed to be identical since the overall structure of the resonator is symmetric about the two directions of motion. Since the resonator ideally has two identical vibration mode, it can be applied to various micro-devices that requires multi DOF motion, especially to microgyroscopes. To investigate the feasibility of application of the resonator, dynamic model of the resonator including the nonlinear behavior of driving electrodes is derived and evaluated with the fabricated one, and the self-tuning characteristics are proved though experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1527-1529
• /
• 2002

본 논문은 저손실 소형 대역통과 여파기인 기지국용 RF/Microwave 수동소자의 다중 공진 모드(Multi-Mode)에 관한 연구로 한개의 유전체 공진기(Dielectric Resonator)로 두개의 공진 모드(Dual-Mode)를 형성하고 그의 결합량을 조절하여 대역통과 여파기를 설계 및 제작하고, 기지국용 Dual-Mode 대역통과 여파기의 소형화, 경량화를 50%이상 향상시켜 양질의 Dual-Mode 공진 특성을 관찰하였다.

• 한국전자파학회논문지
• /
• 제23권5호
• /
• pp.598-605
• /
• 2012

본 논문에서는 이중 모드 공진기 간의 개구 결합을 이용한 적층형 이중 대역 대역 통과 여파기를 제안하였다. 이중 모드 공진기 사이에 위치한 두 개의 개구를 통해 두 개의 결합 경로가 형성된다. 이를 이용하여 공진기의 모양에 변형을 주지 않고 개구의 크기 조절만으로 결합량을 조절할 수 있다. 또한, 이중 모드 공진기의 스터브 사이의 개구를 이용하여 두 번째 대역의 대역폭을 첫 번째 대역에 영향을 주지 않으면서 추가적으로 조절할 수 있다. 개구를 통한 결합 방법에 대해 이론적인 해석을 하였다. 제안된 구조를 이용하여 2.4 GHz WLAN, 3.5 GHz WiMax에서 동작하는 여파기를 설계 및 제작하였다. 제작된 여파기는 각각 2.45 GHz, 3.5 GHz의 중심을 기준으로 9 %, 8 %의 대역폭을 갖는다.

• ETRI Journal
• /
• 제41권1호
• /
• pp.117-123
• /
• 2019

This paper presents a tri-wideband bandpass filter (TWB-BPF) with compact size, high band-to-band isolation, and multiple transmission zeros (TZs). The proposed TWB-BPF is based on a multiple-mode resonator (MMR), which is interpreted by the method of the even- and odd-mode analysis technique. The MMR can excite 11 resonant modes, where the first two modes comprise the first passband, the next four modes form the second passband, and the last five modes are used to generate the third passband. In addition, 10 TZs are yielded to obtain high band-to-band isolation and wide stopband suppression characteristics up to $14.95f_{c1}$ ($f_{c1}$ is the center frequency of the first passband). To verify the proposed filter, a TWB-BPF with 3-dB fractional bandwidths (FBWs) of 37.4%, 43.5%, and 40.4% is designed, fabricated, and measured.

• ETRI Journal
• /
• 제36권4호
• /
• pp.690-693
• /
• 2014

Compact multi-band bandpass filters using quad-mode stub-loaded resonators are proposed in this letter. Firstly, a novel approach about the mode-splitting characteristics of the quadruple-mode resonator is investigated, which can provide dual-band behavior. Secondly, a quad-band filter is proposed and designed by cascading two quadruple-mode resonators; the upper one operates at 1.8/2.4 GHz (GSM- and WiMax-band) and the lower one at 1.57/2.1 GHz (GPS- and WCDMA-band). Finally, the proposed filters have been fabricated. Respectable agreement between simulation and measurement verifies the validity of this design methodology.

• 마이크로전자및패키징학회지
• /
• 제11권4호
• /
• pp.7-11
• /
• 2004

본 논문에서는 $\lambda$/4 헤어핀 공진기를 2.4 GHz 대역의 LTCC(Low Temperature Co-fire Ceramic) 대역통과 필터의 설계에 적용하였다. $\lambda$/4 헤어핀 공진기는 전송선로의 폭을 일정하게 유지한 상태로 특성임피던스를 변화시킬 수 있어, 등가적으로 SIR(Stepped Impedance Resonator)로 동작한다. $\lambda$/4 헤어핀 공진기는 평행결합 선로와 전송선로 부분으로 구성된다. 따라서 공진기의 두 부분의 특성임피던스는 서로 다른 값을 갖는다. 또한 공진기 사이의 결합량을 조절하기 위하여 사용하는 부가적인 결합 패턴은 결합위치에 따라 결합량을 다르게 할 수 있다. 평행 결합선로의 결합 구조와 부가적인 결합 패턴을 모두 고려한 대역통과 필터를 설계하기 위해서 두 결합구조의 등가회로를 하나의 인버터로 통합하는 과정을 제시하였다. 2.4GHz 대역에서 150 MHz 대역폭의 대역통과 필터를 적층 구조로 설계하여 설계 결과와 잘 일치하는 특성을 얻었다.

• Journal of the Optical Society of Korea
• /
• 제14권1호
• /
• pp.38-41
• /
• 2010

We design and fabricate a widely tunable laser diode made of InGaAsP-InP. The diode is monolithically integrated with a wavelength-selective coupled-ring reflector and semiconductor amplifiers. For realization of a compact size device, deeply etched multi-mode interference couplers and square ring resonators composed of total-internal-reflection mirrors are adopted and fabricated using a self-aligned process. It is demonstrated that the laser diode exhibits single mode operation and 16 nm tuning range with side-mode-suppression-ratio exceeding 20 dB.