• 한국위성정보통신학회논문지
• /
• 제7권2호
• /
• pp.76-79
• /
• 2012

위성의 전력 시스템은 전력의 생산, 변환 및 분배를 담당하는 주요한 시스템으로, 임무 수명뿐 아니라 임무 횟수, 시기 등의 설계에 사용된다. 이중 전력의 변환을 담당하는 변압기의 부하와 입력 조건에 따라 안정화 설계가 이루어 져야 하지만, 실지 궤도상에서 Test 및 check-out을 진행할 수 없는 특성으로 다양한 입출 조건 변화에 대한 성능 및 안전성을 확인하기위한 방법이 요구된다. 일반적으로 위성 컨버터는 다양한 부하 조건에 따라 설계되므로, 부피 및 설계의 효율성을 위해 다중 출력 및 여러 개의 stage를 거쳐서 전력 변환이 이루어지게 된다. 하지만, 이로 인해 분석에 많은 어려움을 지니게 되어 직관적인 회로의 파악은 쉽지 않게 된다. 또한 일반적인 분석으로는 모든 상태 방적식의 해를 구하기 쉽지 않아서 실제 운용 시에 가해질 수 있는 소자에 대한 영향성에 대한 분석이 힘들 수 있게 된다. EDF model은 fundamental 주파수 분석을 통해 모든 소자에 대한 분석이 가능한 방법이며 multi-stage의 경우에도 입력 모델링으로 한꺼번에 1st stage와 2nd stage의 분석이 가능한 방법이다. 본 논문에서는 EDF 방법을 통한 modeling과 시뮬레이션 modeling을 비교하여 적용의 타당성을 분석하고, 이를 통해 제어기를 설계하여 multi-stage 컨버터의 직관적인 회로 분석이 가능함을 확인 하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1081-1083
• /
• 2003

The CC's main objective is to manage and control the various operation of the MSC camera. The CC has capability to control the various camera operation modes such as INIT mode, WAIT mode, STANDBY mode, READY IMAGING, DEFAULT READY IMAGING, IBIT and IMAGING mode as well as to manage the interface of the PMU. This paper also shows not only the design concepts in the both of the hardware and the operational software, but also the implementation results for the various CC functions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.664-667
• /
• 2001

A flat-type L$_1$-B$_{8}$ Mode Ultrasonic motor(USM) uses longitudinal-bending multi-mode vibrator which is constructed with the metal-piezoceramic composite thin plate vibrator. Especially, the characteristics of vibrating displacement of the vibrator are important for the fabrication of USM. So, in this study, we tried to analyze them by the FEM(finite element method) simulation program. ANSYS 5.6 we used is a finite element software enabling the analysis of 2 or 3 dimensional structure of piezoelectric materials. Using this made us analyzing the resonance frequency and calculating displacement of vibrator and then the position of the projection.n.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.697-700
• /
• 2003

This paper presents design and analysis of step-down piezoelectric transformer for application to AC-adapters. These transformers are consist of rectangular type and disk type multilayered piezoelectric ceramic plate. This piezoelectric transformer operated in third thickness resonance vibration mode. Finite element methode(FEM) was used for analysing transformer. Vibration mode and electric field of piezoelectric transformer were simulated at resonance frequency. As results, rectangular type transformer's output voltage was higher than the disk type. But disk type transformer's current was lagger than rectangular type. These results are assumed that disk type transformer's mixed vibration mode influence transformer's output characteristics. From these results, we expect that disk type piezoelectric transformer is more adoptable than rectangular plate type piezoelectric transformer for AC adapters.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.29-32
• /
• 1998

A plate-type ultrasonic linear motor using longitudinal and bending multi-vibration mode was designed and fabricated for card-forwarding device. The rotor consisted of piezoelectric ceramic plate and elastic materials. The performances of the motor were measured. As the experimental results, no-load speed of the motor was 0.6 m/s at 80 V in applied voltage. Starting torque was 1.4 mNm and maximum efficiency was 1.2 %.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.861-865
• /
• 1998

A plate-type linear ultrasonic motor using logitudinal and bending multi-vibration mode was designed and fabricated for the application to card-forwarding device. The stator consisted of PZ-PT-PMS piezoelectric ceramic plate and stainless steel. The performances of the motor were measured. As the experimental results, no-load speed of the motor was 0.6m/s when applied voltage was $80\textrm{V}_{rms}$ in resonance frequency. Starting torque was 1.4 mNm and maximum efficiency was 1.2%.

• 한국정보기술학회 영문논문지
• /
• 제9권2호
• /
• pp.1-14
• /
• 2019

This paper considers a multiple-input multiple-output (MIMO) power line communication (PLC) network where interference alignment (IA) technique is used to mitigate the interference that arises in multi-user networks. IA as a precoding technique requires perfect channel state information (CSI) to achieve maximum multiplexing gain. Due to the common-mode reception at the receiver ports, we assume imperfect CSI for the IA precoding design. Here, the CSI is quantized and sent via feedback to the transmit ports. For different levels of CSI quantization, we evaluate the performance of various IA algorithms via Monte Carlo simulations. Simulation results reveal the superior performance of the proposed scheme due to common-mode reception in IA MIMO PLC networks. It is shown that for a quantization level of 5 bits, the CM reception improves the sum-rate by up to 70%.

• 센서학회지
• /
• 제32권4호
• /
• pp.246-251
• /
• 2023

Internet of Things (IoT) systems process signals from various sensors using signal processing algorithms suitable for the signal characteristics. To analyze complex signals, these systems usually use signal processing algorithms in the frequency domain, such as fast Fourier transform (FFT), filtering, and short-time Fourier transform (STFT). In this study, we propose a multi-mode sensor signal processor (SSP) accelerator with an FFT-based hardware design. The FFT processor in the proposed SSP is designed with a radix-2 single-path delay feedback (R2SDF) pipeline architecture for high-speed operation. Moreover, based on this FFT processor, the proposed SSP can perform filtering and STFT operation. The proposed SSP is implemented on a field-programmable gate array (FPGA). By sharing the FFT processor for each algorithm, the required hardware resources are significantly reduced. The proposed SSP is implemented and verified on Xilinxh's Zynq Ultrascale+ MPSoC ZCU104 with 53,591 look-up tables (LUTs), 71,451 flip-flops (FFs), and 44 digital signal processors (DSPs). The FFT, filtering, and STFT algorithm implementations on the proposed SSP achieve 185x average acceleration.

• Journal of Astronomy and Space Sciences
• /
• 제12권1호
• /
• pp.54-65
• /
• 1995

We present a design study for a remote sensing camera system which can be operated in multi-channel mode simultaneously with several bandpass filters. The camera control electronics is based on the multiplexed driving concept, which can provide a variety of flexibility for system control parameters and its individual optimisation. The design can also be applied to any system with linear sensors or frame sensors according to its functional requirements. The system design parameters have been examined, including modification of driving waveforms for different types of sensors, waveforms for low-nosie readout circuit in analog chain, and synchronisation with other signal processing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.215-219
• /
• 2000

In multi-purpose lathe, the design of tilting turret slide system has on important and critical role enhance accuracy of the machining process. Tilting turret unit is traveled by 3-axis slide systems. There is a need to design this part very carefully. In this research, 3-axis sliding system with tilting turret is modeled by considering the element dividing, material proprties, and boundary conditions using MSC/PATRAN. Mode and frequency analysis of each structures such as saddle, careg, and turret are simulated by MSC/MASTRAN, for the purpose of developing the effective design.