• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.906-911
• /
• 2001

In this paper, LPI(low probability of intercept) and AJ(anti jamming) performance of the chirped BPSK system are analyzed. In the chirp method the cyclostationary of the signal is eliminated, since the instantaneous frequency is varied randomly within the whole spread bandwidth. Therefore, chirp method is considered for good LPI system against DAM(delay-and-multiplier) or SC (squaring circuit) interceptor which detects the chip rate or carrier frequency. Longer chirp duration makes the LPI performance better. From the simulation results, the chirp method has better AJ performance than DS(direct sequence) system in the PBNJ(partial band noise jammer) channel. At the same JSR(jammer to signal power ratio) level, chirped BPSK system has more robust AJ performance against MTJ(multi-tone jammer) than PBNJ.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1283-1288
• /
• 2015

In general, IC chip circuit which is operating a cryptographic computation tends to radiate stronger electromagnetic signal to the outside. By using a power detecter such as a loop antenna near cryptographic device, the encryption key can be identified by probing a electromagnetic signal. To implement a method against non-invasive type attack, multi dielectric slab structure on IC chip to suppress radiated electromagnetic signal was introduced. Multiple dielectric slab was implemented by suitably configured to have the Bragg reflection characteristics, and then the reflection response was computed and verified its effectiveness. As a result, the thickness of the dielectric coating was 2mm and the reflection response characteristics for the vertical incidence was achieved to be 91% level.

• Journal of Information Processing Systems
• /
• v.16 no.2
• /
• pp.508-521
• /
• 2020

We compared a novel encoding Lempel-Ziv complexity (ELZC) with three common complexity algorithms i.e., approximate entropy (ApEn), sample entropy (SampEn), and classic Lempel-Ziv complexity (CLZC) so as to determine a satisfied complexity and its corresponding quality indices for assessing quality of multi-lead electrocardiogram (ECG). First, we calculated the aforementioned algorithms on six artificial time series in order to compare their performance in terms of discerning randomness and the inherent irregularity within time series. Then, for analyzing sensitivity of the algorithms to content level of different noises within the ECG, we investigated their change trend in five artificial synthetic noisy ECGs containing different noises at several signal noise ratios. Finally, three quality indices based on the ELZC of the multi-lead ECG were proposed to assess the quality of 862 real 12-lead ECGs from the MIT databases. The results showed the ELZC could discern randomness and the inherent irregularity within six artificial time series, and also reflect content level of different noises within five artificial synthetic ECGs. The results indicated the AUCs of three quality indices of the ELZC had statistical significance (>0.500). The ELZC and its corresponding three indices were more suitable for multi-lead ECG quality assessment than the other three algorithms.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.8
• /
• pp.741-746
• /
• 2007

In this study, transfer path identification and output estimation are simulated by multi-dimension spectral analysis method (MDSA). Multi -input/single-output system give expression the vehicle suspension which each inputs are correlated reciprocally. In case of correlating with inputs, the system needs separating the each input signal by MDSA. Main simulations are about finding effective input by coherent output spectrum and selecting optimal input's number by multiple coherence function. Also, by shielding transfer path of each input, transfer path characteristic is identified in terms of overall integrated contribution level.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.85-90
• /
• 2018

This paper compares the equalization algorithm of CR-MMA (Constellation Reduction-Multi Modulus Algorithm) and FC-MMA (Fast Convergence-Multi Modulus Algorithm) for the compensation of channel's distortion in transmitting the 2 dimensional 16-QAM signals. The CR-MMA adaptive equalizer use the error signal by reduce the nonconstant modulus signal to constant modulus signal in order to updates the tap coefficient, and the FC-MMA adptive equalizer use the error signal applying the modified dispersion constant considering the number of symbol level instead of signal point reduction. These two algorithm are known to its superior to the convergence characteristic among the MMA series equalizer. In this paper, the other equalization performance including the convergence characteristic was compared by computer simulation. As a result of computer simulation, FC-MMA has more good performance in the residual isi, maximum distortion and SER performance than CR-MMA, but not in convergence speed.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.775-779
• /
• 1999

This paper presents design of AGC(Automatic Gain Control) and DC offset remover suitable for cable modem which makes use of QAM(Quadrature Amplitude Modulation) scheme. Since QAM has multi-level signal characteristic, for high-order QAM, the constellation is dense and the distance of decision boundary between adjacent symbols is short. So AGC and DC offset remover must be designed optionally for preventing performance degradation. AGC is designed into feedback type and is related to the STR(Symbol Timing Recovery)and Paff interpolation algorithm. Whereas AGC need to perform average power detection during many symbols by comparison with the reference power, DC offset remover uses only the instant polarity decision such that simple implementation can be achieved with good performance. Though the AGC and DC offset remover are simulated here only for 256 QAM scheme for convenience'sake, it can be applied to other multi-level QAM or PSK modulation scheme.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.711-714
• /
• 2005

In this paper, we proposed the electric circuit using one common arm of H-Bridge Inverters to reduce the number of switching component in multi-level PWM inverter combined with H-Bridge Inverters and Transformers. and we proposed the switching method that can be same rate of usage at each transformer. Also, we tested the proposed prototype inverter to clarify the proposed electric circuit and reasonableness of control signal.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.95-101
• /
• 2005

In this paper, we proposed the electric circuit using one common arm of H-Bridge Inverters to reduce the number of switching component in multi-level PWM inverter combined with H-Bridge Inverters and Transformers. and we proposed the switching method that can be same rate of usage at each transformer. Also, we tested the proposed prototype inverter to clarify the proposed electric circuit and reasonableness of control signal.

• Journal of Korea Multimedia Society
• /
• v.11 no.6
• /
• pp.869-874
• /
• 2008

The work of creating character motion needs the higher professional technology and sense and the creating work of realistic and natural motion possess the most part of production term. In this paper we introduce the easy and convenient 3D animation authoring tool which makes the motion based on whole-body inverse kinematics and motion editing function. The proposed 3D animation authoring tool uses the forward kinematics using quaternion and whole-body inverse kinematics to determine the rotation and displacement of skeleton. Also, it provides the motion editing function using multi-level B-spline with quasi-interpolant. By using the proposed tool, we can make 3D animation easily and conveniently.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.76-82
• /
• 2011

In this paper, we propose the technique to detect the location and size of the small target in multi-resolution image using cubic facet model. The input image is reduced by the multi-resolution and we obtain the multi-resolution images. We apply the facet model and the local maxima conditions to the multi-resolution images of each level. And then, we detect the location of the small target. We estimate that the location at the maximum of the $D_2$ which means the local maxima value of the facet model in the multi-resolution images is the location of the small target. We can detect the small target of the various size about the multi-resolution images of each level. In this paper, we experimented in the various infrared images with the small target. The method using the typical facet model applies a mask. However, the proposed method applies a mask in the multi-resolution images. We verified to vary the mask size and differ the size of the small target. The proposed algorithm can detect the location and size of the small target.