• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.628-636
• /
• 2006

This paper presents 3D infinite elements in Cartesian coordinates for the elastodynamic problem in multi-layered half-space. Five kinds of infinite elements are developed by using approximate expressions of multiple wave components for the wave function in exterior far-field soil region. They are horizontal, horizontal-corner, vertical, vertical-corner and vertical-horizontal-corner elements. The elements can be used for the multi-wave propagating problem. Numerical example analyses are presented for rigid disk, square footings and embedded footing on homogeneous and layered half-space. The numerical results obtained show the effectiveness of the proposed infinite elements.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.533-540
• /
• 2002

Recently, geogrid reinforcement has been applied tn the subgrade of the roadway and the railway on the compressible layered soil, and the relevant reserch on the reinforcing mechanism has been performed. In this study, mechanics of geogrid reinforcement and the parameters for the improvement of bearing capacity are evaluated and presented based on the case histories of the field load test on the geogrid-reinforced layered subgrade

• Journal of the Korean Geotechnical Society
• /
• v.19 no.3
• /
• pp.5-13
• /
• 2003

The soil nailing is one of the useful support-system in urban excavation because of the presence of other structures in the vicinity Since the soil nailing system was introduced, model experiments and theoretical studies have been performed to investigate behavior of soil nailed wall. However, there are few data in the case of multi-layered soil strata just like Seoul Metropolitan area in Korea. The feed back analyses are carried out using the measured wall displacement data for soil nailing construction sites with multi-layered strata in order to analyze the distance and the coefficients of extension zone of ground behind soil nailed wall. As a result, the distance of extension zone increased with increasing of the final excavation depth and the ratio of the distance to the final excavation depth was shown to be about 94% of the final excavation depth. Also, the coefficients of extension zone increased with enlargement of soil layer thickness and converged into constant value of 1.05. On the other hand, the maximum vertical displacements by the feed back analysis and Caspe's method were shown to be approximately 80%, 150~280% of the maximum horizontal displacement respectively.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.304-311
• /
• 2004

In this paper, three dimensional dynamic infinite elements are developed for the soil-structure interaction analysis in multi-layered halfspace. For the efficient discretization of 3-D for field regions, five types of dynamic infinite elements are developed. They are the horizontal, vertical, upper horizontal conner, lower vertical conner and conner of conner infinite elements. The shape functions of the infinite elements are based on the approximate expressions of the analytical solutions of the propagating waves in the infinite region. Numerical example analyses are presented for demonstrating the effectiveness of the proposed infinite elements.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.79-86
• /
• 2003

In this paper, three dimensional dynamic infinite elements are developed for the soil-structure interaction analysis in multi-layered halfspace. For the efficient discretization of 3-D for field regions, five types of dynamic infinite elements are developed, they are the horizontal, vertical, upper horizontal conner, lower vertical conner and conner of conner infinite elements. The shape functions of the infinite elements are based on the approximate expressions of the analytical solutions of the propagation wave in the infinite region. Numerical example analyses are presented for demonstrating the effectiveness of the proposed infinite elements.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.2
• /
• pp.129-144
• /
• 2010

The earth pressure acting on the vertical shaft is less than that acting on the retaining wall due to three dimensional arching effect. Thus, it might be essential to estimate the earth pressure actually acting on the shaft when designing the vertical shaft. In this paper, large-sized model tests were conducted as Part II of companion papers to verify the newly suggested earth pressure equation proposed by Kim et al. (2009: Part I of companion papers) that can be used when designing the vertical shaft in cohesionless soils as well as in c-$\phi$ soils and multi-layered soils. The newly developed model test apparatus was designed to be able to simulate staged shaft excavation. Model tests were performed by varying the radius of vertical shaft in dry soil. Moreover, tests on c-$\phi$ soils and on multi-layered soils were also performed; in order to induce apparent cohesion to the cohesionless soil, we add some water to the dry soil to make the soil partially-saturated before depositing by raining method. Experimental results showed a load transfer from excavated ground to non-excavated zone below dredging level due to arching effect when simulating staged excavation. It was also found that measured earth pressure was far smaller than estimated if excavation is done at once; the final earth pressure measured after performing staged excavation was larger and matched with that estimated from the newly proposed equation. Measured results in c-$\phi$ soils and in multi-layered soils showed reduction in earth pressures due to apparent cohesion effect and showed good matches with analytical results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4C
• /
• pp.109-116
• /
• 2011

In this study, dynamic response of a vertical shaft subjected to seismic loads was evaluated by three-dimensional Finite Element (FE) approach. The emphasis was on quantifying the ground conditions, input motions and direction of motions. A series of parametric analyses were carried out. From the results of FE analysis, more than 1.7 times increase in shear force and bending moment is obtained when the stiff layer was thinker than the soft layer. And all of the maximum values were occurred near the interface between the soil layers. The dynamic behavior of vertical shaft was significantly influenced by the different frequencies of the input motion, and normalized acceleration of surrounding soil was 3 times larger than vertical shaft.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5C
• /
• pp.283-292
• /
• 2008

In this research, finite difference (FD) scheme for the interface of the layer between different soil characteristics was suggested. Based on the suggested scheme, FD analysis program for the consolidation analysis of the multi-layered and smeared soil was developed. And the applicability of the program was investigated by the FD analysis conducted for the various soil conditions. Analysis results showed that the permeability near the drainage boundary had a dominant effect on the consolidation rate. And the consolidation rate of the soil with the constant permeability in smeared area was retarded more than the soil with the linear variation of permeability in smeared area. Simple assumption of the constant variation of permeability in smeared area could be used when the decreasing rate of permeability in smeared area was relatively low. But exact assumption of the permeability variation in smeared area should be considered when the decreasing rate of permeability in smeared area was relatively high. Finally, based on the analysis result on Busan area, the analysis considering multi-layered soil should be needed to exactly evaluate time for the completion of consolidation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.3
• /
• pp.47-58
• /
• 1991

This paper presents dynamic infinite elements for soil-structure interaction analysis. In order to discretize the far field of the unbounded soil media, axisymmetric infinite elements which are capable of propagating multi-waves are proposed. An efficient numerical integration scheme for constructing the element characteristic matrices of the infinite elements in developed based on Gauss-Laguerre quadrature. The efficiency of the infinite elements is demonstrated by comparing the computed impedances of rigid circular footings on an elastic half space and on a layered half spaces with those obtained analytically.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1997.03a
• /
• pp.73-80
• /
• 1997