• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.11
• /
• pp.550-556
• /
• 2001

The computerized cardiac analysis system, which acquires and analyzes the electrical activation signal propagating along the surface of the heart, is indispensible equipment for the open heart surgery and electrical cardiac study. In this paper, the design requirement and the electrical circuit analysis are performed to construct the multi-channel cardiac activation pre-amplifier necessary for a signal conditioning circuit. The general 64 channel configuration is expanded into 128 channels to enhance the spatial resolution on the mapped surface of the heart. The 128 channels pre-amplifier consists of input circuit, differential amplifier, right leg driven circuit and isolation part. It has distinct features; high voltage protection, leakage current limitation, isolation and the maximization of common mode rejection ratio with respect to the half-cell potential difference due to different electrode materials. The final pre-amplifier circuit is assembled with 8 boards, each of which composing of 16 channels.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.2
• /
• pp.123-130
• /
• 2007

In this paper, the design requirement and the electrical circuit analysis are performed to construct the multi-channel cardiac activation pre-amplifier necessary for a signal conditioning circuit. The general 64 channel configuration is expanded into 128 channels to enhance the spatial resolution on the mapped surface of the heart. The 128 channels pre-amplifier consists of input circuit, differential amplifier, right leg driven circuit and main-amplifier with notch filter part.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.12
• /
• pp.52-57
• /
• 2011

This paper presents a 4-channel optical transmitter circuit realized in a $0.18{\mu}m$ CMOS technology for high-speed digital interface. Particularly, the VCSEL driver exploits the feed-forward technique, and the pre-amplifier employs the pulse-width control. Thus, the optical transmitter operates at the bias current up to 4mA and the modulation current from $2{\sim}8mA_{pp}$. with the pulse-width distortion compensated effectively. The 4-channel optical transmitter array chip occupies the area of $1.0{\times}1.7mm^2$ and dissipates 35mW per channel at maximum current operations from a single 1.8V supply.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.307-307
• /
• 2010

ICRF 또는 NB 시스템에 의해 가열된 고에너지 이온들을 측정하는 것은 핵융합 플라즈마에서 중요한 과제 중의 하나이다. 특히 ICRF를 이용한 D(H) 플라즈마의 H minority의 가열은 H의 분율에 따라 가열의 정도가 달라지고 이 결과는 이온의 고에너지 측정을 통해서 확인할 수 있으므로 정확한 고속 이온의 측정은 매우 중요하다. 본 연구에서는 고속 이온을 전하 교환된 중성입자로부터 측정하는 중성입자 검출기를 개발하였다. Si 광다이오드인 AXUV3ELA를 기반으로 50-300 keV 범위의 고에너지 H 및 D 이온을 측정할 수 있는 소형의 중성입자 검출기(Compact Neutral Particle Analyzer : CNPA)가 설계 제작되었다. 검출된 신호는 Pre-amp와 shaping amplifier를 통해 증폭되고 shaping 되며 마지막으로 다중채널 분석기(Multi Channel Analyzer : MCA)를 통해서 계수된다. 본 발표에서는 NPA의 구체적인 설계 특성과 함께 Am-241 gamma ray 선원을 이용한 NPA의 시험 및 보정결과를 보고할 예정이다.

• Journal of Biomedical Engineering Research
• /
• v.29 no.3
• /
• pp.191-197
• /
• 2008

This research focused on the development of wireless telemetry system that can monitor heart rates of multiple rehabilitation patients in real time without constraint. The whole system consists of the multiple patient's side devices (PSDs) and one central monitoring system (CMS). The PSD consists of a microphone, amplifier, filter, microcontroller, and RF (Radio Frequency) modem. In addition, the PSD was designed to be wearable and low power consumption. The CMS consists of an RF modem and general PC and it was designed to monitor heart rates from multiple patients simultaneously. The system warns an alarm signal when a patient's heart rate exceeds the pre-set range for each patient. This system can be useful to monitor the heart rate of exercising rehabilitation patients and control the patients condition and the exercising level.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.179-189
• /
• 2000

Recently, due to the increasing interests in deep sea development, all possible efforts to the development of underwater unmanned working vehicles such as AUV(Autonomous Underwater Vehicle) or underwater robot are exerted. This paper proposes a new efficient acoustic-based underwater image data communication system, which ensures a certain level of maximum throughput regardless of the propagation delay of ultrasonic and allowsfast data transmission through the multiple ultrasonic communication channel. Proposed system consists of an acoustic transducer which operates at 136kHz center frequency and it's 10kHz bandwidth, pre-amplifier, $\pi/4 QPSK$(Quadrature Phase Shift Keying) modulation/demodu-lation method, image compressing method using JPEG technique and modified Stop & Wait protocol. The experimental result of the system make it possible to transfer the underwater image as a high throughput at the basin test. The results of test are also verified which allows to desirable transmission performance compared with the existing developed system and the possibility to put the practical use of survey and investigation in the water.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.684-690
• /
• 2010

Recently, the NG(Next Generation) system is studied for supporting convergence of various services and multi mode of single terminal. And a demand of user for taking the various services is getting increased, for supporting these services, many systems being able to transmit a large message have been appeared. In the NG system, it has to be supporting the CDMA and WCDMA besides the tele communication systems using OFDM method with single terminal An intergrated system can be improved with adopting of SoC technique. For adopting SoC technique on the intergrated terminal, we have to solve the non linear problem of HPA(High Power Amplifier). Nonlinear characteristic of HPA distorts both amplitude and phase of transmit signal, this distortion cause deep adjacent channel interference. We adopt a polynomial pre-distortion technique for this problem. In this paper, a noble modem design for NG mobile communication service and a method using polynomial pre-distorter with PAPR technique for counterbalancing nonlinear characteristic of the HPA are proposed.