• 로봇학회논문지
• /
• 제13권4호
• /
• pp.265-271
• /
• 2018

The recent prosthetic technologies pursue to control multi-DOFs (degrees-of-freedom) hand and wrist. However, challenges such as high cost, wear-ability, and motion intent recognition for feedback control still remain for the use in daily living activities. The paper proposes a multi-channel knit band sensor to worn easily for surface EMG-based prosthetic control. The knitted electrodes were fabricated with conductive yarn, and the band except the electrodes are knitted using non-conductive yarn which has moisture wicking property. Two types of the knit bands are fabricated such as sixteen-electrodes for eight-channels and thirty-two electrodes for sixteen-channels. In order to substantiate the performance of the biopotential signal acquisition, several experiments are conducted. Signal to noise ratio (SNR) value of the knit band sensor was 18.48 dB. According to various forearm motions including hand and wrist, sixteen-channels EMG signals could be clearly distinguishable. In addition, the pattern recognition performance to control myoelectric prosthesis was verified in that overall classification accuracy of the RMS (root mean squares) filtered EMG signals (97.84%) was higher than that of the raw EMG signals (87.06%).

• 한국통신학회논문지
• /
• 제21권6호
• /
• pp.1587-1595
• /
• 1996

We obtained the predicted and measured results for the reflection coefficient and radiation pattern of Ka-band (20- GHz) corrugated horn, which is usually used for feeder of reflector antenna for satellite communication, using suface impedance condition. In order to predict the reture losses of corrugated horn, we analyzed propagation constant of hybrid mode in the corrugated waveguide and then obtained the total reflection coefficient using the circuti theory of multi-step transformer. We also got the radiation pattern of corrugated horn with small flare angle, considering the phase deviation and integrate transverse field on aperture. A test model of corrugated horn antenna for Ka-band designed using theory and program displayed performance and the results agree with the theoretical prediction.

• 마이크로전자및패키징학회지
• /
• 제11권1호
• /
• pp.13-19
• /
• 2004

본 논문은 wireless LAN 주파수 대역 (5725∼5825 MHz)에서의 다차원패턴기술(Photonic Band Gap : PBG)을 이용한 Yagi-Uda 안테나와 결합하여 광대역 마이크로스트립 패치 안테나를 구현하였으며, PBG Cell을 이용한 안테나와 이용하지 않은 안테나를 비교 분석하였다. PBG 구조를 적용한 안테나에서의 대역폭이 약 30 MHz 정도 더 넓게 나왔으며, 안테나의 이득 또한 1dB정도 더 높게 나왔는데 이는 Ground 면에 2차원적인 다차원 패턴 구조를 적용하여 안테나 표면을 따라 전파하는 전자파의 전송이 억제되도록 표면파의 발생을 효과적으로 차단했기 때문으로 분석된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.479-484
• /
• 1999

Rice crop has relatively short growing season during the summer in Korea and, therefore, it is often difficult to acquire cloud-free imagery on time. This study was attempt to define the temporal characteristics of radar backscattering observed from satellite L-band SAR data on different growing stages of rice crop. Six scenes of multi-temporal JERS SAR data were obtained from the transplanting season to the harvesting month of October. Six layers of multi-temporal SAR data were registered on a common geographic coordinate system. Using topographic maps, field collected data, and Landsat TM data, several sample rice fields were delineated from the imagery and their relative radar backscatters were calculated by using a set of reference targets. The temporal pattern of radar backscattering was very distinctive by the growing stage of rice crop. It was also separable between two types of rice fields having different cultivation practices. Considering the temporal characteristics of radar backscattering observed from the study, it is obvious that a certain date of the growing season can be more effective to delineate the exact area of the cultivated rice crop field.

• 천문학논총
• /
• 제30권2호
• /
• pp.59-60
• /
• 2015

High resolution, multi-wavelength images from the Dutch Open Telescope were used to study the detailed mechanisms that might be involved in the multiple layer solar atmosphere observed in high cadence multi-wavelength observations. With the exceptional data observed for active region NOAA 10789 on 2005 July 13th, we study the changing pattern of the fibril using multi-wavelength tomography of the $H{\alpha}$ line center and blue wing, Ca II H, and the G Band. It is believed that a long fibril that is rooted in the umbra, with longer apparent periodicity, may be due to morphological changes. To determine this, we conduct phase difference and coherency analysis between points along the fibril to understand how the wave propagates.

• 조명전기설비학회논문지
• /
• 제14권6호
• /
• pp.58-68
• /
• 2000

본 논문에서는 다대식 가열로내의 산소 농도 변화를 표현하는 모델이 제안되었다. 설계된 모델은 크게 '잔류 가스에 대한 모델'과 '산소에 대한 모델'의 두가지로 구성되었다. 각각의 모델은 산소농의 변동에 관여하는 네가지 요인들올 화학, 유체 이론적 관계식과 퍼지 이론을 이용하여 설계되었다. 고려된 네가지 요인들은 버너에서 의 연소반응, 연소대간의 유체 이동, 가열로 내부로부터 외부로의 유체 흐름 및 출입구를 통한 외부 공기의 유입 등이다. 모의 실헝 결과블 통해 제안된 모델로 계산된 각 연소대내의 산소 농도 변화가 설제 조업시 발생하는 유형과 유시함을 알 수 있었다.

• 한국전자파학회논문지
• /
• 제27권10호
• /
• pp.945-948
• /
• 2016

최근 프리미엄급 스마트폰들은 대부분 메탈 프레임을 채용하고 있으며, 이는 중저가 스마트폰으로 확산되고 있는 추세이다. 하지만, 메탈 프레임은 스마트폰 내 디지털 부품에서 발생하는 전자파 노이즈의 좋은 전달 경로가 되어, 스마트폰 상단부 또는 하단부에 위치한 무선 안테나에 전자파 간섭을 일으키는 원인이 될 수 있다. 본 논문에서는 메탈 프레임에 EBG(Electromagnetic Band Gap) 구조를 적용하여 안테나로의 전자파 간섭을 줄일 수 있는 방법을 제안하였다. $7{\times}6$ 배열의 다중 비아(Multi-via) EBG 구조를 갖는 메탈 프레임을 설계하였으며, 이를 적용할 경우, 메탈 프레임을 통한 표면 전자파 노이즈 간섭을 20 dB 정도 저감시킬 수 있음을 시뮬레이션을 통해 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.492-498
• /
• 2002

In this paper, we present the simulation results of multi-layer VCO(voltage controlled oscillator), which is composed of resonator, oscillator, and buffer circuit, using EM simulator and nonlinear RF circuit simulator. EM simulator is used for obtaining the EM(Electromagnetic) characteristics of conductor pattern as well as designing the multi-layer VCO. Obtained EM characteristics were used as real components in nonlinear RF circuit simulation. Finally the overall VCO was simulated by the nonlinear RF circuit simulator. The material for the circuit pattern was Ag and the dielectric was Dupont 951AT, which will be applied for LTCC process. The structure of multi-layer VCO is constructed with 4 conducting layer. Simulated results showed that the output level was about 4.5 [dBm], the phase noise was -104 [dBc/Hz] at 30 [kHz] offset frequency, the harmonics -8 dBc, and the control voltage sensitivity of 30 [MHz/V] with a DC current consumption of 9.5 [mA]. The size of VCO is $6{\times}9{\times}2 mm$(0.11 [cc]).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.653-656
• /
• 2002

In this paper, we present the simulation results of multi-layer VCO(voltage controlled oscillator), which is composed of resonator, oscillator, and buffer circuit, using EM simulator and nonlinear RF circuit simulator. EM simulator is used for obtaining the EM(Electromagnetic) characteristics of conductor pattern as well as designing the multi-layer VCO. Obtained EM characteristics were used as real components in nonlinear RF circuit simulation. Finally the overall VCO was simulated by the nonlinear RF circuit simulator. The material for the circuit pattern was Ag and the dielectric was DuPont 951AT, which will be applied for LTCC process. The structure of multi-layer VCO is constructed with 4 conducting layer. Simulated results showed that the output level was about 4.5 [dBm], the phase noise was -104 [dBc/Hz] at 30 [kHz] offset frequency, the harmonics -8 dBc, and the control voltage sensitivity of 30 [MHz/V] with a DC current consumption of 9.5 [mA]. The size of VCO is $6{\times}9{\times}2$ mm(0.11[cc]).

• 한국ITS학회 논문지
• /
• 제13권1호
• /
• pp.61-66
• /
• 2014

본 논문에서는 LTE 700, GSM 850, GSM 900, GSM 1800, GSM 1900, UMTS 대역에서 동작 가능한 안테나를 설계 제작하였다. 작은 크기의 안테나로 광대역 특성을 얻기 위해 다중대역 모노폴 안테나를 기반으로 커플링 구조를 사용하였고 두 개의 slot을 삽입하여 hexa-band 대역폭 특성을 구현하였다. 시뮬레이션에 의한 최적화된 파라미터를 가지고 제작 하였고 제작된 안테나는 $VSWR{\leq}W3:1$에서 Low 주파수대역 410Hz 대역폭 (0.688-1.098GHz)과 High 주파수대역 643MHz 대역폭 (1.607-2.250GHz)이 측정되어 hexa-band(0.698-0.960GHz, 1.710-2.170GHz) 대역폭을 만족하고 높은 이득 (-0.52-4.68dBi) 및 전방향성 (Omni-directional) 방사 패턴을 얻었다.