• International Journal of Aeronautical and Space Sciences
• /
• 제17권4호
• /
• pp.518-525
• /
• 2016

This paper presents the characteristics of non-fundamental multi-mode combustion instability and the effects of high-harmonic components on the Rayleigh criterion. Phenomenological observations of multi-harmonic-mode dynamic pressure waves regarding the intensity of harmonic components and the source of wave distortion have been explained by introducing examples of second- and third-order harmonics at various amplitudes. The amplitude and order of the harmonic components distorted the wave shapes, including the peak and the amplitude, of the dynamic pressure and heat release, and consequently the temporal Rayleigh index and its integrals. A cause-and-effect analysis was used to identify the root causes of the phase delay and the amplification of the Rayleigh index. From this analysis, the skewness of the dynamic pressure turned out to be a major source in determining whether multi-mode instability is driving or damping, as well as in optimizing the combustor design, such as the mixing length and the combustor length, to avoid unstable regions. The results can be used to minimize errors in predicting combustion instability in cases of high multi-mode combustion instability. In the future, the amount of research and the number of applications will increase because new fuels, such as fast-burning syngases, are prone to generating multi-mode instabilities.

• 한국추진공학회지
• /
• 제12권3호
• /
• pp.68-75
• /
• 2008

이전에 개발된 병렬 해석 코드를 이용하여 원형 관내에서의 삼차원 데토네이션 파 전파 특성을 관찰 하였다. 일련의 해석을 통하여 직경이 일정한 원형 관에서 반응 속도 상수 값 k에 의존하는 데토네이션 셀 생성 메커니즘을 알 수 있었다. 삼차원 유동에 대한 비정상 유동의 해석 결과는 two-, three-, four-cell 구조의 메커니즘을 잘 보여주었으며, 반응속도 상수 k가 증가함에 따라 생성되는 셀 수가 증가하고 셀의 폭과 길이는 감소하였다. 모든 다중-셀 모드에서 데토네이션 파의 구조와 그을음막 기록은 횡단파의 움직임에 의하여 만들어지며, 데토네이션 파면은 주기적으로 일정한 다각형 및 풍차 형상을 가지게 된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.111-111
• /
• 2012

In this talk, we represent a novel approach to investigating intra-nanorod surface plasmon coupling with control over block compositions. The multi-component rod-like nanostructures, which consist of optically active components (Au and Ag) and optically less active component (for example, Ni) in UV-vis-NIR spectral window, showed interesting optical response depending on each block length and the total length of the structure. By controlling the composition and relative lengths of the blocks that comprise these structures, we can tailor the overall optical properties. Depending on the relative fraction of Au and Ag blocks, the intensity of the transverse modes varied without noticeable peak shifts. However, the strong intraparticle surface plasmon coupling resulted in the collective appearance of longitudinal LSP modes, including higher-order modes. The experimental observations were confirmed by theoretical calculation, using a discrete dipole approximation method. In addition, we will briefly discuss how single nanorod solar cells can be synthesized by using by using electrochemical deposition and AAO hard templates.

• 한국전기전자재료학회논문지
• /
• 제34권1호
• /
• pp.44-49
• /
• 2021

Recently, infrared (IR) and near-infrared (NIR) light-emitting diodes (LEDs) were widely used for home medical applications owing to its low output power and wide exposed area for curing. For deep penetration of the light under the skin, multiple LEDs with wavelengths of 700~10,000 nm were located on a flexible printed circuit board. When multiple wavelengths of LEDs were soldered on a circuit board, the lifetime of LED module highly depends on LEDs with a short lifetime. The mean time to failure (MTTF) was able to calculate with the experimental results under high temperature and the Arrhenius model. The results of this study could help companies to approve the warranty of LED modules and its product.

• Smart Structures and Systems
• /
• 제22권4호
• /
• pp.481-493
• /
• 2018

Ultrasonic guided waves have attracted increasing attention for non-destructive testing (NDT) and structural health monitoring (SHM) of bridge cables. They offer advantages like single measurement, wide coverage of acoustical field, and long-range propagation capability. To design defect detection systems, it is essential to understand how guided waves propagate in cables and how to select the optimal excitation frequency and mode. However, certain cable characteristics such as multiple wires, anchorage, and polyethylene (PE) sheath increase the complexity in analyzing the guided wave propagation. In this study, guided wave modes for multi-wire bridge cables are identified by using a semi-analytical finite element (SAFE) technique to obtain relevant dispersion curves. Numerical results indicated that the number of guided wave modes increases, the length of the flat region with a low frequency of L(0,1) mode becomes shorter, and the cutoff frequency for high order longitudinal wave modes becomes lower, as the number of steel wires in a cable increases. These findings were used in design of transducers for defect detection and selection of the optimal wave mode and frequency for subsequent experiments. A magnetostrictive transducer system was used to excite and detect the guided waves. The applicability of the proposed approach for detecting and locating wire breakages was demonstrated for a cable with 37 wires. The present ultrasonic guided wave method has been found to be very responsive to the number of brokenwires and is thus capable of detecting defects with varying sizes.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2011년도 정기 학술대회
• /
• pp.282-284
• /
• 2011

Based on graphene oxide and multi-walled carbon nanotube layers, a wireless bi-layer actuator that can be remotely controlled with an electromagnetic induction system has been developed. The graphene-based bi-layer actuator exhibits a large one-way bending deformation under eddy current stimuli due to asymmetrical responses originating from the temperature difference of the two different carbon layers. In order to validate one-way bending actuation, the coefficients of thermal expansion of carbon nanotube and graphene oxide are mathematically formulated in this study based on the atomic bonding energy related to the bonding length. The newly designed graphene-based bi-layer actuator is highly sensitive to electromagnetic wave irradiation thus it can trigger a new actuation mode for the realization of remotely controllable actuators and is expected to have potential applications in various wireless systems.

• 한국연안방재학회지
• /
• 제4권1호
• /
• pp.1-6
• /
• 2017

Most of the short period waves are blocked by the breakwaters when the short period irregular waves propagate into the ports. However, nonlinear irregular wave numerical experiments show that the long waves generated by the nonlinear interaction is predominant in the port. Seiches phenomenon in Geumjin Fishing Port is very similar to 60 and 300 second harbor oscillations. By arranging the inner breakwater of the proper length in the inside of the port, it is possible to effectively reduce seiches, as well as the short-period wave, and significantly improve the harbor tranquility. In the case of rectangular basin type such as the Geumjin Fishing Port, the multi-directional irregular wave numerical model should be used for the investigation and countermeasures for the harbor tranquility.

• Journal of Communications and Networks
• /
• 제16권3호
• /
• pp.305-310
• /
• 2014

Optimal position of access point (AP) is important for multi-gigabit wireless transmission in terahertz (THz) wireless local area network (WLAN)-type applications, where there exist the THz characteristic multiple clusters in channel propagation. By considering the multiple clusters in THz indoor communications, this paper investigates the optimal AP position when two APs are issued for increasing the system capacity. Numerical results reveal that the central position of each AP within each half service region, which offers the shortest cumulated path length for line-of-sight paths, is optimal to achieve the maximal system capacity.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 춘계학술발표회 초록집
• /
• pp.128-129
• /
• 2007

$ZnS/Na_3AlF_6$ multi-layer thin film were produced by evaporation system. ZnS were selected as a high refractive index material and $Na_3AlF_6$ were selected as low refractive index material. Optical properties including color effect were systematically studied in terms of different optical thickness by spectrophotometer. In oder to compare with experimental data, the Essential Macleod Program(EMP) was adopted that simulation program. The thin film consisting of $ZnS/Na_3AlF_6$ multi-layer show the wave length of $530{\sim}600nm$, typically color range between purple, blue, green. It was confirmed that this experimental result was well matched with simulation data.

• 한국항행학회논문지
• /
• 제24권2호
• /
• pp.85-91
• /
• 2020

최근 다양한 환경에서 무인기를 효율적으로 운용하기 위한 목적으로 멀티모드 레이다 시스템이 고안되었으며, 이는 PD (pulse Doppler) 방식과 FMCW (frequency modulated continuous wave) 방식을 통합하여 활용할 수 있다는 장점을 가진다. 멀티모드 레이다 시스템의 하드웨어 구조의 경우 FFT (fast Fourier transform) 프로세서와 IFFT (inverse fast Fourier transform) 프로세서가 필수적이지만, FFT 프로세서는 큰 복잡도를 갖는 구조 중 하나로 FFT 프로세서의 복잡도를 감소시키는 방향으로의 구조 설계가 필요하다. 또한, 다양한 거리 해상도를 요구하는 레이다 응용 환경을 고려했을 때, FFT 프로세서는 가변 길이의 연산을 지원할 필요가 있다. 이에 본 논문에서는 멀티모드 레이다 신호처리 프로세서 거리 추정부의 FFT 프로세서와 IFFT 프로세서를 16~1024 포인트의 가변 길이 연산을 지원하는 단일 FFT 프로세서의 하드웨어로 설계하여 제안한다. 제안된 FFT 프로세서는 MATLAB 기반 알고리즘 설계를 수행한 뒤, 그 결과를 토대로 Verilog-HDL (hardware description language)을 활용하여 RTL (register transfer level) 설계가 수행되었으며, 논리 합성 결과 총 총 7,452개의 logic elements, 5,116개의 registers로 구현 가능함을 확인하였다.