• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1423-1428
• /
• 2012

In this paper, we investigated an implementation of anti-fire monitoring system based on the RS-485 communication to support local area coverage within a range of 1 Km range. We developed a Multi Point Communication Protocol supporting input/output information processing and control up to 8128 terminal check points, which provides an interface between the anti-fire monitoring system receiver and multiplex transponders. Additionally, a multiplex transponders controller has been designed for the implemented system to comply with the government regulation on fire protection, especially to monitor, report and control 1016 terminal check points within the time limit.

• Journal of Korea Multimedia Society
• /
• v.20 no.3
• /
• pp.511-519
• /
• 2017

This Paper introduces the design and communication method between PLC (Programmable Logic Controller) and Arduino based on MODBUS Protocol. MODBUS connection can be established in a new or existing system very easily, therefore we used this protocol in our proposed system. In the field of automatic devices, multi-function serial port such as RS232, RS422, RS485, and so on creates a great convenience to the developer. This proposed system used RS485 as a key mediator for data exchanging on a connected network. We also believe that it will reduce the development cost in various automated industry because this system can be reused or can be implemented any such PLC installed machines. RS485 is used as a communication interface between PLC (as a slave) and Arduino (as a master), through which a reliable network is created for safe and fast communication. Furthermore, RS485 allows multiple devices(up to 32) to communicate at half duplex on a single pair of wires and provides a long connectivity area (up to 1200 meters) as compare to other device, which makes it a user-friendly for various devices in the automated industry. Moreover, Arduino can play as a mediator by connecting third party device and setup a communication network with PLC.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.2
• /
• pp.105-114
• /
• 2015

Heated glasses are widely used to prevent surface condensation and freezing in ship and building windows. This study proposes a heated glass temperature control system composed of power and control circuits to control the temperature of heated glasses. The proposed temperature control system adopts a digital controller instead of a conventional analog controller. Thus, the proposed system has better characteristics, such as precise setup and control of glass temperature, setup and control of output power, and control mode change between ON/OFF and phase controls. The system can also implement multi-functional control algorithms. The control characteristics are not dependent upon external disturbances, such as ambient temperature and electrical noises. Furthermore, the proposed temperature control system utilizes the power line communication (PLC) method to control the number of heated glasses without any extra communication lines. The system proposes a new communication protocol with strong immunity to electrical switching noises. A new sensorless algorithm is used to detect the temperature of the heated glass. This study presents the design guidelines in detail and its effectiveness are confirmed by implementing a 4-kw prototype temperature control system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.53-62
• /
• 2010

Recently, various industrial embedded systems including vehicles controlled electronically are evolving to distributed multi-micro controller system. Accordingly, there is a need for standard CAN(Controller Area Network) protocol that ensures high stability and reliability of communication and is simple to construct object-oriented system with high control efficiency. CAN communication interface used general-purpose processor doesn't have many limitations in various application development because of fixed hardware architecture. This paper design and implement a CAN communication interface system based on FPGA. It is verified function and performance of system through monitoring communication with existing AT90CAN128 controller. Implemented CAN communication interface can be reused in development of application systems based on FPGA. And it provides low-cost, small-size and low-power design advantages.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.200-202
• /
• 2004

This paper deals with the real-time monitoring and control system using PC, PDA(Win CE embedded device) and PCS(based BREW platform). The camera attached to the server captures the moving target, and the captured frame of color image is encoded in JPEG for image compression at the server. The client(PC, PDA, PCS) receives the image data from the remote server and the received image is decoded from decompression. We use the TCP/IP protocol to send the image frames. The client can control the position of the camera by sending the control command to the server. Two DC servo motors for the camera are controlled in any directions, up-down and left-right, by the controller which is communicating with the server via the serial communication to get the control command. In this way, on the client we can monitor the moving images at the server and also control the position of the camera.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.18 no.1
• /
• pp.45-54
• /
• 1993

Monitoring processor in a circuit switched network is considered. Monitoring processor monitors communication links offers a grade of service in each link to controller. Such an information is useful for an effective maintenance of system. Two links with asymmetric system parameters and multi-symmetric links are respectively considered. Each links is to be an independent M /M/ 1/ 1/ type. Markov modeling technique is used to represent a model of monitoring processor with FCFS steering protocol. Performance measures considered are ratio of monitored jobs in each link, availability of minitoring processor and throughput of virtual processor in each link. The value of the performance meausres are compared with existing and simulation results.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.219-220
• /
• 2009

Many surveillance cameras used in security system are controlled with RS-485 communication protocol. In this situation, if RS-485 connection can be replaced with wireless connection using sensor network technology, an installation will become ease because of no wired connection and also a deployment of cameras will become free. This paper explains about the design of wireless sensor node and the necessary implementation for an operation, which can be replacing RS-485 connection for the development of CCTV control system based on wireless sensor network. The hardware platform of sensor node was designed based on MicaZ and the software was developed based on TinyOS. To control surveillance cameras deployed on wide area, the supporting of multi-hop also was implemented. With the result of experiment deploying on real environment, it was revealed that the controller could control cameras quickly with wireless.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.8
• /
• pp.689-695
• /
• 2004

This paper presents a robot system that combines computer network and an autonomous mobile robot where RTOS is installed. We propose a wireless communication protocol, and also implement it on the RTOS of the robot system. Main controller of the robot processes the control program as a task type in the real-time operating system. Peripheral devices are driven by the device driver functions with the dependency of the hardware. Because the client and server program was implemented to support the multi-platforms by Java SDK and Java JMF, it is easy to analyze programs, maintain system, and correct the errors in the system. End-user can control a robot with a vision showing remote sight over the Internet in real time, and the robot is moved keeping away from the obstacles by itself and command of the server received from end-user at the local client.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.182-189
• /
• 2016

In this paper, we propose a buoy system based on multi-hop relay networks for ocean observation. The proposed system consists of various sensor modules, a gateway, wireless communication modules, and a remote monitoring site. The sensor modules are integrated with various communication interfaces and connected to the gateway of the proposed buoy system with an unified protocol based on controller area network (CAN)-bus. In order to communicate with the remote monitoring site and extend the coverage, the proposed system uses long-term evolution (LTE) router and XBee mesh network modules. The field test results show that the proposed system can extend the coverage using the proposed multi-hop relay network.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.46-53
• /
• 2012

The traffic in research network for the new structure of the network and new service research has the various properties. From the perspective of a specific traffic point of view, transmission of traffic with different requirements using a single routing protocol is an obstacle to satisfy requirements. In this study, we classify the properties of the traffic into two types. We propose the way that we can get the overall optimization effect, the experiment proves it by providing independent multiple forwarding path by applying optimized algorithm by types. In order to distinguish each type of traffic we use the ports on the switch and in order to implement independent path we apply OpenFlow system. In other words, we present the measure that can be implemented to improve the satisfaction of the traffic by making multiple paths by OpenFlow controller according to the type of traffic and by enforcing in Forwarder.