• 천문학회보
• /
• 제35권2호
• /
• pp.37.1-37.1
• /
• 2010

A high redshift quasar is useful to investigate the early part of our universe. Since they are one of the brightest objects in the early universe, they can provide us with clues of the growth of super massive black holes and the early metal enrichment history. To discover the high redshift quasars, we designed a survey of wide area and moderate depth; Infrared Medium-deep Survey (IMS), a J-band imaging survey of ~200 deg2 area where the multi-wavelength data sets exist. To obtain the J-band data, we are using the United Kingdom Infra-Red Telescope (UKIRT), and so far we have covered~40 deg2 with Y- or J-bands over 36 observing nights. We used color-color diagrams of multi-wavelength bands including i, z, Y, J, K, $3.6{\mu}m$ and $4.5{\mu}m$ to select high redshift quasars. The major challenge in the selection is many M/L/T dwarfs, low redshift galaxies, and instrumental defects that can be mistaken as a high redshift quasar. We describe how such contaminating sources can be excluded by adopting multiple color-color diagrams and eye-ball inspections. So far, our selection reveals one quasar candidates at z~7 and a few candidates at z~6. In this poster presentation, we will update the current status of the quasar selection in the IMS fields.

• 마이크로전자및패키징학회지
• /
• 제7권1호
• /
• pp.1-5
• /
• 2000

기판과의 동시소성에 의한 고주파 MCM-C (Multi Chip Module-Cofired)용 저항을 제작하고 DC 및 6 GHz 까지의 RF 특성을 측정하였다. 기판은 저온 소성용 기판으로서 총 8층으로 구성하였으며, 7층에 저항체 및 전극을 인쇄하고 via를 통하여 기판의 최상부까지 연결되도록 하였다. 저항체 페이스트, 저항체의 크기, via의 길이 변화에 따라서 저항의 RF 특성은 고주파일수록 더욱 DC 저항값에서 부터 변화되는 양상을 보였다. 측정결과로부터 내부저항은 저항용량에 관계없이 전송선로, capacitor, inductor성분이 저항성분과 함께 혼재되어 있는 하나의 등가회로로 표현할 수 있으며, 내부저항의 구조 변화에 의한 전송선로의 특성임피던스 $Z_{o}$의 변화가 RF 특성을 크게 좌우하는 것으로 보여진다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.988-995
• /
• 2020

Air gun shock systems are commonly used as alternative explosion energy sources for underwater explosion (UNDEX) shock tests owing to their low cost and environmental impact. The airbag inflator of automotive airbag systems is also very useful to generate extremely rapid underwater gas release in labscale tests. To overcome the restrictions on the very small computational time step owing to the very fine fluid mesh around the nozzle hole in the explicit integration algorithm, and also the absence of a commercial solver and software for gas UNDEX of airbag inflator, an idealized airbag inflator and fluid mesh modeling technique was developed using nozzle holes of relatively large size and several small TNT charges instead of gas inside the airbag inflator. The objective of this study is to validate the results of an UNDEX response analysis of one and two idealized airbag inflators by comparison with the results of shock tests in a small water tank. This comparison was performed using the multi-material Arbitrary Lagrangian-Eulerian formulation and fluid-structure interaction algorithm. The number, size, vertical distance from the nozzle outlet, detonation velocity, and lighting times of small TNT charges were determined. Through mesh size convergence tests, the UNDEX response analysis and idealized airbag inflator modeling were validated.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.45-53
• /
• 2004

An experimental study was carried out to obtain the fundamental data about the effects of radicals induced injection on premixture combustion. A constant volume combustor divided to the sub-chamber and the main chamber was used. The volume of the sub-chamber is set up to occupy less than 1.5％ of that of whole combustion chamber. Radial twelve narrow passage holes are arranged between the main chamber and the sub-chamber. The products including radicals generated by spark ignition in the sub-chamber will derive the simultaneous multi-point ignition in the main chamber. While the equivalence ratio of pre-mixture in the main chamber and the sub-chamber is uniform. We have examined the effects of the sub-chamber volume, the diameter of passage hole, and the equivalence ratio on the combustion characteristics by means of burning pressure measurement and flame visualization. In the case of radical ignition method(RI), the overall turning time including the ignition delay became very short and the maximum burning pressure was slightly increased in comparison with those of the conventional spark ignition method(SI), that is, single chamber combustion without the sub-chamber. The combustible lean limit by RI method is extended to more ER=0.25 than that by SI method. Therefore the decrease of every emission including NOx and the improvement of fuel consumption is anticipated due to lean burn.

• 한국정밀공학회지
• /
• 제29권8호
• /
• pp.834-839
• /
• 2012

Recently, mechanical components with miniaturized size, complex shape and fine surface are on demand from industries such as mobile electronics, medical devices and defense. The size of them is smaller than several millimeters, the shape has micro-holes, curve, or multi-step and the surface is mirror-like. This features are not able to be machined with the conventional machining, therefore electro-discharge machining (EDM), cutting, and laser machining have been applied. If the technologies are assisted by vibration, high aspect ratio and good surface are to be achieved. In this paper, prior and current researches of vibration-assisted machining are reviewed. Machining mechanisms with vibration-assisting are explained, their effects are shown, and vibrating apparatuses are discussed. Especially, comparison between with and without vibration assisting is presented. This review shows the vibration-assisted machining is effectively fabricate the components with small and complicated shape and fine surface finish.

• Advances in materials Research
• /
• 제1권2호
• /
• pp.129-146
• /
• 2012

Polycrystalline diamond is an ideal material for parts with micro-holes and has been widely used as dies and cutting tools in automotive, aerospace and woodworking industries due to its superior wear and corrosion resistance. In this research paper, the modeling and simultaneous optimization of multiple performance characteristics such as material removal rate and surface roughness of polycrystalline diamond (PCD) with ultrasonic machining process has been presented. The fuzzy logic and taguchi's quality loss function has been used. In recent years, fuzzy logic has been used in manufacturing engineering for modeling and monitoring. Also the effect of controllable machining parameters like type of abrasive slurry, their size and concentration, nature of tool material and the power rating of the machine has been determined by applying the single objective and multi-objective optimization techniques. The analysis of results has been done using the MATLAB 7.5 software and results obtained are validated by conducting the confirmation experiments. The results show the considerable improvement in S/N ratio as compared to initial cutting conditions. The surface roughness of machined surface has been measured by using the Perthometer (M4Pi, Mahr Germany).

• 한국정밀공학회지
• /
• 제27권1호
• /
• pp.105-112
• /
• 2010

Weldlines are generated during the injection molding process when two or more melt flows are brought into contact. The weldlines are unavoidable in the cases of presence of holes or inserts, multi-gated delivery systems, significant thickness change, etc. At the welded contact region, a 'V'-shaped notch is formed on the surface of the molded part. This 'V'-notch deteriorates not only surface appearance but also mechanical strength of the molded part. To eliminate or reduce weldlines so as to improve the weldline strength, the mold temperature at the corresponding weld locations should be maintained higher than the glass transition temperature of the resin material. The present study implements high-frequency induction heating in order to rapidly raise mold surface temperature without a significant increase in cycle time. This induction heating enables to local mold heating so as to eliminate or reduce weldlines in an injection-molded plastic part. The effect of induction heating conditions on the weldline strength and surface appearance of an injection-molded part is investigated.

• 천문학회보
• /
• 제38권2호
• /
• pp.69.1-69.1
• /
• 2013

We describe a survey of quasars in the early universe beyond z=5, which is one of the main sciences of the Infrared Medium-deep Survey (IMS) performed by the Center for the Exploration of the Origin of the Universe (CEOU). We use multi-wavelength archival data such as SDSS, CFHTLS, UKIDSS, and SWIRE, which provide deep images over wide areas sufficient enough for searching high redshift quasars. In addition, we carried out a J-band imaging survey at the United Kingdom InfraRed Telescope (UKIRT) with a depth of ~23 AB and survey area of ~100 $deg^2$, which makes IMS the most suitable survey for finding high redshift quasars at z~7. Also for the quasar candidates at z~5.5, we are conducting observations with the Camera for QUasars in EArly uNiverse (CQUEAN), which are efficient for selecting robust quasar candidate samples in this redshift range. We used various color-color diagrams suitable to the specific redshift ranges, which can reduce the contaminating sources such as M/L/T dwarfs, low redshift galaxies, and instrumental defects. The high redshift quasars we are confirming can provide us with clues to the growth of super massive black holes since z~7. Also by expanding the quasar sample at 5

• 상하수도학회지
• /
• 제28권2호
• /
• pp.217-223
• /
• 2014

In order to suggest the methodology for improving the equity of flow distribution in open channel with multiple outlet, CFD simulations were carried out for actual scale distribution channel being operated in domestic G_WTP(Water Treatment Plant). Also, before and after installing the longitudinal multi hole(diameter=250 mm, 116 holes) baffle suggested by this research, turbidity measurements data were collected for evaluating the effects of hydraulic modification for inlet flow equity. From the both results, total turbidity of settled water was lowered by 30 % and equity of flow distribution was improved about 60 % compared with before hydraulic structure modification.

• Elastomers and Composites
• /
• 제46권2호
• /
• pp.94-101
• /
• 2011

종래의 방사선 차단막은 납판이나 납 분말을 과량 배합하여 사용되고 있기 때문에 무거울 뿐만 아니라 인체중독의 위험성이 있다. 또한 작은 핀홀이 존재할 경우 방사선의 직접 투과 위험성이 있는 단점이 있다. 본 특집에서는 최근 선진국을 중심으로 연구가 활발한 다층구조의 고분자 방사선 차단막 기술에 대해 특허분석과 문헌고찰을 중심으로 소개한다. 특히 판상형 나노무기입자를 이용한 방사선 차단 및 내구성 향상에 대한 새로운 개념을 소개한다.