• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.337-337
• /
• 2004

As one of researches for the P ＆ T purposes, a basic experiment on the recovery of actinide elements from the mixture with rare earth elements by means of electrorefining using a liquid cadmium cathode in the LiCl-KC1 eutectic melt was carried out. In order to examine the behaviors of electrodeposition of metal ions on a liquid electrode, recovery experiments of rare earth metals resulting from forming electrodeposits were performed by a galvanostatic electrolysis method at various current densities. A cyclic voltammetric technique was applied to determine reduction-oxidation potential of each metal element in the melt and to detect the changes of the multi component melt composition for on-line monitoring. Also, a collaboration study with RIAR was completed to test the preliminary feasibility on a recovery of actinide elements from the mixture with rare earth elements using a liquid cadmium cathode and actinide metals. Experimental results showed that the ratio of actinides to rare earths, 9: 0.5∼1 led to the rare earth content of about 5∼10 wt% in the deposit.

• 천문학회보
• /
• 제38권2호
• /
• pp.32-32
• /
• 2013

The Korean VLBI Network (KVN) as a world-first multi-frequency VLBI system is operated at four bands of 22, 43, 86, and 129 GHz simultaneously. The performances of both single dish and VLBI network were already confirmed through single dish researches and VLBI evaluation test observations. The VLBI common use of the KVN at 22/43 GHz bands has been started from this autumn. The combined network of KVN and Japanese VERA (KaVA) will start the common use from the first half of next year. Here we present several observational results in the fields of star forming regions, late-type stars, and active galactic nuclei using the KVN and KaVA. The fringes of 44 GHz $CH_3OH$ (Class I) masers were detected from 26 sources for the first time using the KVN and imaging observations are under performing. Simultaneous observations of SiO and $H_2O$ masers toward about 1000 evolved stars showed the different maser properties between SiO and $H_2O$ masers according to the evolutionary stages of AGB and post-AGB stars. The catalog of correlated flux densities were established from a 43 GHz (Q-band) survey of 637 extragalactic sources. At 22 GHz (K-band), flux density measurement and fringe survey for new sources were performed toward a large number of sources. In addition, the large program of KVN and/or KaVA under planning is introduced.

• 소성∙가공
• /
• 제14권8호통권80호
• /
• pp.675-680
• /
• 2005

This study was aimed at the design of the dies for the automobile part for the engine oil leakage prevention using the computer simulation to shorten the period of production, on the basis of the process planning which was designed by the field experts. In the computer simulation,'eesy-2-form' of 2D FEM simulation package and 'eesy-DieOpt' have been used, which are the commercial process analysis and die design program. Through the simulation of 'eesy-2-form', we could know the propriety of the forming process, the inner pressure of the die and the suitable fitting pressure between the insert and the sleeve which was not showing any positive tangential stresses in the insert. Through the simulation of 'eesy-DieOpt', we could know the number of the stress ring, the diameter ratios, the stresses of the die, the shrink fitting tolerance and temperature in the condition of the already determined maximum outer die diameter of the multi-stage former. The validity of the die design using the computer simulation was analyzed by the experiments and the results were satisfactory. As the results of this study, the new and easy die design system for cold forging has been developed.

• Carbon letters
• /
• 제11권3호
• /
• pp.211-215
• /
• 2010

Multi-walled carbon nanotube (MWCNT)/poly(vinyl alcohol) (PVA) nanocomposite hydrogels were prepared by freezingthawing method for the electro-responsive transdermal drug delivery. MWCNTs were used as the functional ingredient to improve both mechanical and electrical properties of MWCNT/PVA nanocomposite hydrogels. The morphology of nanocomposites revealed the uniform distribution of MWCNTs and the good interfacial contact. The compression moduli of hydrogel matrices increased greatly from 40 to 1500 kPa by forming MWCNT/PVA nanocomposites. The swelling ratio of MWCNT/PVA nanocomposites decreased as the content of MWCNTs increased under no electric voltage applied. However, the swelling ratio of MWCNT/PVA nanocomposites increased as the content of MWCNTs increased under electric voltage applied and the applied electric voltage increased. The drug was released in the electro-responsive manner through the skin due to the electro-sensitive swelling characteristics of MWCNT/PVA nanocomposite hydrogels.

• 조명전기설비학회논문지
• /
• 제28권10호
• /
• pp.16-26
• /
• 2014

This paper proposes new 13-level inverter topology and DC/DC converter buck-boost structure topology for multilevel, compounding uni-directional and bi-directional switches, and proposes high-efficient multilevel inverter system in which the proposed two PCS(Power Conditioning System) was connected in series. In proposed multilevel inverter of forming a output 13-level phase voltage by using total 18 switching parts, Then bi-directional switch has a characteristic of reducing conduction loss and controlling the reactive power effectively by separating electrically from the neutral point. DC/DC converter for supplying in dependent 3 DC voltage to the proposed multi-level inverter generates 180-degree phase shifted PWM by the symmetrically combined structure of 2 buck-boost converter and twice switching frequency efficiency can be obtained, meanwhile, the converter can step up/down the output voltage and 20% output can be generated comparing the input voltage. This proposed system is verified with the simulation and laboratory test.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.247-253
• /
• 2004

As a large scale port development in coastal waters proceeds step by step and populations in the vicinity of port are getting increased, the issue on "how to dispose the treated municipal water and wastewater in harbor" brings peoples′ concern. The submarine outfall system discharges the primary or secondary treated effluent at the coastline or in deep water, or between these two. The effluent, which has a density similar to that of fresh water, rises to the sea surface forming plume or jet, together with entraining the surrounding sea water and becomes very dilute. We intended in this paper to investigate the impact on dilution of effluent and the behavior of flume under the conditions of the seasonal and spatial temperature variations, which have not been noticeable in designing effective marine outfall system. To predict and analyze the behaviour and dilution characteristics of plume not just with the effluent temperature, but also with the seasonal variation of temperature of surround water and tidal changes, CORMIX(Cornell Mixing Zone Expert System)-GI have been applied. The results should be used with caution in evaluation the mixing zone characteristics of discharged water. We hope to help for the effective operation of outfall system, probable outfall design, protection of water quality, and warm water discharges from a power plant, etc.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.282-285
• /
• 2006

This paper analyzed the characteristics of the Lossy JPEG of the meteorological satellite image, and analyzed the quality of the Lossy JPEG compression, which is proper for the LRIT(Low Rate Information Transmission) to be serviced to the SDUS(Small-scale Data Utilization Station) system of the COMS(Communication, Oceans, Meteorological Satellite). Since COMS is to start running after 2008, we collected the data of the MTSAT-1R(Multi-functional Transport Satellite -1R) for analysis, and after forming the original image to be used to LRIT by each channel and time zone of the satellite image data, we set the different quality with the Lossy JPEG compression, and compressed the original data. For the characteristic analysis of the Lossy JPEG, we measured PSNR(Peak Signal to Noise Rate), compression rate and the time spent in compression following each quality of Lossy JPEG compression. As a result of the analysis of the satellite image data of the MTSAT-1R, the ideal quality of the Lossy JPEG compression was found to be 90% in the VIS Channel, 85% in the IR1 Channel, 80% in the IR2 Channel, 90% in the IR3 Channel and 90% in the IR4 Channel.

• 한국CDE학회논문집
• /
• 제4권3호
• /
• pp.173-179
• /
• 1999

In reverse engineering, when a shape containing multi-patched surfaces is digitized, the boundaries of these surfaces should be detected. The objective of this paper is to introduce a computationally efficient segmentation technique for extracting edges, ad partitioning the 3D measuring point data based on the location of the boundaries. The procedure begins with the identification of the edge points. An automatic edge-based approach is developed on the basis of local geometry. A parametric quadric surface approximation method is used to estimate the local surface curvature properties. the least-square approximation scheme minimizes the sum of the squares of the actual euclidean distance between the neighborhood data points and the parametric quadric surface. The surface curvatures and the principal directions are computed from the locally approximated surfaces. Edge points are identified as the curvature extremes, and zero-crossing, which are found from the estimated surface curvatures. After edge points are identified, edge-neighborhood chain-coding algorithm is used for forming boundary curves. The original point set is then broke down into subsets, which meet along the boundaries, by scan line algorithm. All point data are applied to each boundary loops to partition the points to different regions. Experimental results are presented to verify the developed method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.277-280
• /
• 2006

The hydroformability of aluminum alloy sheets at elevated temperatures have been investigated in this study. It is necessary to analyze the variations of the mechanical properties that depend on the forming temperature and the heat conduction during warm hydroforming. Therefore, in this study a coupled simulation of plastic deformation and temperature distribution in the warm hydroforming process is performed and compared with experimental data. The multi-purpose code DEFORM-2D can handle this type of calculations but it takes high computation time if contact heat transfer between die, tube and pressure medium occurs. Experiments were conducted by high temperature tribometer(pin-on-disk) allowing measuring the friction coefficients of the aluminum alloys at several temperatures and these results are applied to the coupled simulation by which the optimal process parameters such as internal pressure and preset temperature on hydroformability can be determined. The comparison of the FE analysis with the experimental results has shown that hydroformability given by bulge height, and temperature distribution of the tube specimen make a little difference with the FE results but the trend predicted by simulation agrees well with experiments.

• Fibers and Polymers
• /
• 제1권1호
• /
• pp.32-36
• /
• 2000

An alternative strategy to .educe the percolation threshold of carbon black (CB) in polymer blends was investigated using random copolymer ternary blends of polystyrene (PS), poly(methyl methacrylate)(PMMA), and a styrene-methyl methacrylate random copolymer (SMMA). The target morphology was to selectively locate CB particles in the encapsulating layer of SMMA during melt mixing. The CB used in this study is BP-2000 from Cabot and has a strong selective affinity to PS. Even when the CB was premixed with SMMA, it moves to the PS phase during the melt mixing. However, we also observed the CB particles located at the interface between SMMA and PS phases. Through this study it is found that the interaction between polymers and CB particles is critical for selectively localizing CB particles in multi-component polymer blends. Although appropriate processing condition may retard the movement of CB particles to the polymer phase with affinity, it cannot prevent it completely and locate them to the SMMA phase, which is not thermodynamically favored. To locate CB particles in an encapsulating layer of ternary polymer blends, first of all, polymers forming it should have selective affinity to CB.