• 한국정보처리학회논문지
• /
• 제6권11호
• /
• pp.3086-3096
• /
• 1999

To declare conformance of multi-protocol Implementation Under Test(IUT), every layer of the multi-protocol IUT should be tested. According to ISO9646, single-layer test method is applied to testing the highest layer of multi-protocol IUT and single-layer embedded test method is used for the layers by layer all the protocols in a multi-protocol IUT. This paper proposes a new method for testing a multi-protocol IUT. The proposed test method assumes that a multi-protocol IUT is under test and that the interfaces between the layers cannot be controlled or observed by the tester. We apply the proposed test method to TCP/IP and compare the application results with those of the existing test turns out that the proposed test method significantly reduces the number of test cases as well as the number of test events while providing the same test coverage. In addition, the proposed test method shows the capability to locate the layer that is source of failure in testing multi-protocol IUTs.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.275-283
• /
• 2002

In this study, the shaking table tests of block systems on the rigid base have been performed to identify the seismic response and the dynamic behavior of the piled multi-block systems. To understand the characteristics of seismic response of piled multi-block systems, it is necessary to understand the dynamic behavior of single block system. Therefore, the skating table test of the single block system has been performed first. Moreover, by performing the shaking table tests of multi-block systems, the characteristics of dynamic behavior of piled multi-block systems have been analyzed. Also in this study, the distinct element method(DEM) has been used to analyze the nonlinear behavior of the piled multi-block systems. The results of the shaking table tests show that the response of the multi-block systems is very complicated. But by using DEM, the behavior of piled multi-block systems has been predicted and described well.

• 한국항공운항학회지
• /
• 제18권2호
• /
• pp.41-45
• /
• 2010

It is often misled that Multi Pilot License is introduced by International Civil Aviation Organization for the shortage of pilots. The truth is, however, that the license is focused on efficient training of co-pilots in the airline transportation system which an autopilot system is increasing in the Multi Crew environment. ICAO has been researching on the license since 1982, and made it international standard on 2006. Currently, co-pilots trained under Multi-Crew Pilot License courses are continuously increasing over the world. Although the license has introduced to Korea in September 10, 2009, it has not won popular support yet. This paper will lead people to precise understanding of Multi-Crew Pilot License and suggest its introduction plan.

• 한국항해항만학회지
• /
• 제33권4호
• /
• pp.271-275
• /
• 2009

A strategic decision making on location selection for product transportation includes many tangible and untangible factors. To choose the best locations is a difficult job in the sense that objectives usually conflict with each other. In this paper, we consider a multi stage multi criteria transshipment problem with different types of items to be transported from the sources to the destination points. For the optimization of the problem, a goal programming formulation will be presented in which the location selection for each product type will be determined under the multi objective criteria. In the study, we generalize the transshipment model with a variety of product types and finite number of different intermediate nodes between origins and destinations. For the selection of the criteria we selected the costs(fixed cost and transportation cost), location numbers, and unsatisfied demand for each type of products in multi stage transportation, which are the main goals in transshipment modelling problems. The related conditions are also modelled through linear formats.

• 한국컴퓨터정보학회논문지
• /
• 제21권4호
• /
• pp.1-8
• /
• 2016

In small embedded systems including IoT devices, memory size is very small and it is important to reduce memory amount for execution of application programs. For multi-threaded applications, stack may consume a large amount of memory because each thread has its own stack of sufficiently large size for worst case. This paper presents an implementation of single stack multi-threading, called SSThread (Single Stack Thread), by sharing a stack for all threads to reduce stack memory size. By using SSThread, multi-threaded applications can be programmed based on normal C language environment and there is no requirement of transporting multi-threading operating systems. It consists of several library functions and various C macro definitions. Even though some functional restrictions in comparison to operating systems supporting complete multi-thread functionalities, it is very useful for small embedded systems with tiny memory size and it is simple to setup programming environment for multi-thread applications.

• Journal of information and communication convergence engineering
• /
• 제7권2호
• /
• pp.231-234
• /
• 2009

Speckle noise reduction for power Doppler ventricle coherent image for restoration and enhancement using Fast Wavelet Transform with multi-thresholding and multi-filtering on the each subbands is presented. Fast Wavelet Transform divides into low frequency component image to high frequency component image to be multi-resolved. Speckle noise is located on high frequency component in multi-resolution image mainly. A Doppler ventricle image is transformed and inversed with separated threshold function and filtering from low to high resolved images for restoration to utilize visualization for ventricle diagnosis. The experimental result shows that the proposed method has better performance in comparison with the conventional method.

• Journal of Communications and Networks
• /
• 제7권4호
• /
• pp.462-470
• /
• 2005

We propose a multi-rate and multi-BEP transmission scheme using adaptive overlapping pulse-position modulator (OPPM) and optical power controller in optical code division multiple access (CDMA) networks. The proposed system achieves the multi-rate and multi-BEP transmission by accommodating users with different values of OPPM parameter and transmitted power in the same network. The proposed scheme has advantages that the system is not required to change the code length and number of weight depending on the required bit rate of a user and the difference of bit rates does not have so much effect on the bit error probabilities (BEPs). Moreover, the difference of transmitted powers does not cause the change of bit rate. We analyze the BEPs of the four multimedia service classes corresponding to the com­binations of high/low-rates and low/high-BEPs and show that the proposed scheme can easily achieve distinct differentiation of the service classes with the simple system configuration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.422-424
• /
• 1992

In this paper, we are designed a hierachical system controller and builed a robot system for high precision assembly consisting in multi-arms and multi-sensor. For the control of a multi-arms robot system, the robot system are consisted of cell controller, station controller and device. The Operating System of a cell controller is VxWorks for real-time multi-processing. Using by C-language, we are proposed a multi-arms robot control language based a RCCL, and this control language is partially implemented and tested in multi-robot control system.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권1호
• /
• pp.35-41
• /
• 2017

Precise Point Positioning (PPP) method is based on dual-frequency data of Global Navigation Satellite Systems (GNSS). The recent multi-constellations GNSS (multi-GNSS) enable us to bring great opportunities for enhanced precise positioning, navigation, and timing. In the paper, the multi-GNSS PPP with a combination of four systems (GPS, GLONASS, Galileo, and BeiDou) is analyzed to evaluate the improvement on positioning accuracy and convergence time. GNSS observations obtained from DAEJ reference station in South Korea are processed with both the multi-GNSS PPP and the GPS-only PPP. The performance of multi-GNSS PPP is not dramatically improved when compared to that of GPS only PPP. Its performance could be affected by the orbit errors of BeiDou geostationary satellites. However, multi-GNSS PPP can significantly improve the convergence speed of GPS-only PPP in terms of position accuracy.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권12호
• /
• pp.5135-5149
• /
• 2015

Communications among multi-party must be fast, cost effective and secure. Today's computing environments such as internet conference, multi-user games and many more applications involve multi-party. All participants together establish a common session key to enable multi-party and secure exchange of messages. Multi-party password-based authenticated key exchange scheme allows users to communicate securely over an insecure network by using easy-to-remember password. Kwon et al. proposed a practical three-party password-based authenticated key exchange (3-PAKE) scheme to allow two users to establish a session key through a server without pre-sharing a password between users. However, Kwon et al.'s scheme cannot meet the security requirements of key authentication, key confirmation and anonymity. In this paper, we present a novel, simple and efficient multi-party password-based authenticated key exchange (M-PAKE) scheme based on the elliptic curve cryptography for mobile environment. Our proposed scheme only requires two round-messages. Furthermore, the proposed scheme not only satisfies security requirements for PAKE scheme but also achieves efficient computation and communication.