• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.1
• /
• pp.37-43
• /
• 2009

In this study, the physical properties of base paper for the manufacture of mulching mat for afforestation seedling were investigated. The base paper for mulching mat was prepared by stock conditions of PAE and AKD addition into the screened slurry of KOCC for the strengthening effects of wet tensile and burst strength. The optimum additions of PAE and AKD were considered at 2% and 0.5%, respectively. The accelerated aging by ISO 5630-1 and wet heat aging method under hot water for 2 kinds of commercial mulching and wet strength paper were compared with the base paper prepared for mulching mat manufacture. The accelerated aging test for the base paper prepared for mulching mat manufacture resulted in the same tendency of physical properties as two kinds of commercial products. However, the results of wet heat aging test under hot water indicated that the physical strength for base paper prepared was much higher than others. In addition, the opacity behavior for base paper prepared was enough effects to obstruct weeds growth by isolating transmission of sunlight.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.4
• /
• pp.85-92
• /
• 2014

The disposal of the paper mill sludge and the paper mill sludge ash become more important issue, because the environment regulation becomes more strict. In this study, the new mulching system was developed by using the paper sludge ash. The soil surface hardening mechanism for mulching with paper sludge ash, red clay and coal ash was evaluated. Since the CaO in the paper sludge ash provided the harden structure with water, the surface hardening mulching structure could cover the field surface and prevent the germination of weeds. More than 50 w.t.% of red clay and 10 w.t.% of paper sludge ash were required to create the solid soil surface structure for mulching. The field test with the new soil surface hardening mulching system for three months showed the generation of weeds could successfully be inhibited by the system.

• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.1
• /
• pp.73-78
• /
• 1983

In order to investigate the relation between weather factors, soil water, and tobacco yield grown by nonnulching and mulehing cultivations, a regression analysis was conducted for data collected from 8 years (1971 to 1978) for a flue-cured variety of Hicks. The soil water was calculated by Smith's method. 1 . Tobacco yield was largely correlated to soil water deficit during draught time for nonmulclung cultivation; $Y=6.146+8.6185\times-0.0925$\times2(R=0.935)^{***})$ 2. Tobacco yield was more largely correlated to soil water in flexible draght time interval than in fixed time interval during maximum growing phase.3. This field test was supposed that the optimal soil water condition was 65%field caps city. In this condition tobacco yield was 197. 1-216.5kg/10a for non-mulching cultivation. But the soil water deficit in draught season was little matter for mulching cultivation. The relation between xield and evaporation during May to June was Y: -1199.55+9.4 353$\times$:O. 0155$\times$2 (R=0.904") Maximum tobacco yield was expected to 223.6-251.4kg/10a for mulching cultivation. 5 . Tobacco required high temperature and light even in drying season (maximum growing phase) for mulching cultivation.tion.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.6
• /
• pp.227-237
• /
• 2015

From January 2013 to October 2015, weed invasion control techniques was tested in the test road of Jungbunaeryuk expressway so as to collect preliminary data for the management methods of the upper exterior banking of expressway shoulders. Then, monitoring was conducted and its results are as follows. Mat (sheet), solidifying agent, and mulching (wood chips) were applied for the test and their initial effects of preventing weed invasion were all excellent. It was found that the homogeneity of the wood chip mulching method needs to improve. In the mat method and the mulching method were found to have the most excellent economic feasibility and aesthetics, respectively. The covering degree was found to be the highest at 80% in the control site, followed by the wood chip site at 20% and the solidifying agent site and the non-woven fabric site at 5% each. As for species diversity, the control had the largest variety of species. Two years after the construction, many different species of plants invaded and were growing. Plants including weed didn't tend to invade the slopes applied with non-woven fabric. In addition, weed didn't invade the solidifying agent site and the aesthetics of the upper exterior banking of expressway shoulders was found to be excellent. The wood chip site was found to require consistent management for preventing weed invasion. The mat (sheet) site, the solidifying agent site, and the wood chip mulching site were found to have excellent weed prevention effects. As time passed, the mat (sheet) site and the solidifying agent site showed better weed prevention effects. However, they need consistent monitoring for further application.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.6
• /
• pp.43-55
• /
• 2020

The study was performed in order to derive the management methods of revegetation space on embankment upper in the shoulder of expressway. The pilot study was conducted in 2013 on the test road section of the Jungbu Inland Expressway (Smart Highway) and continues to be monitored until 2020. In the test, three commonly used methods for weed control were applied. In the early two to three years, most of the methods were effective in controlling weeds. However, at the end of six years, weed suppression effects were different for each treatment. Vegetation coverage was 90% in the untreated control, 70-80% wood chip mulching method, 50-60% solidification method, and 20% sheet mulching method. The sheet method was found to be the most effective given the low vegetation coverage was effective in controlling weeds. The wood chip mulching method is promoting weed growth over time, and weeds are invading as the effect of soil hardening is reduced in the place where the soil hardener is treated. Among the methods applied in the test, mulching the sheet is the most effective, but it is important to use a durable sheet. In the future, it is necessary to find ways to control weeds on road shoulders, considering both economic and environmental aspects. For the proper management in the shoulder of expressway set target zone is needed. Clear standards for weed control on expressway should be established. And the technology to be applied must be durable for 3 years or more and must be able to suppress the amount of weeds to a level of 20% or less.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.6
• /
• pp.139-151
• /
• 2007

To protect the surface of ground-cutting slopes and ground-raised slopes and to recover environment-friendly slopes at the national road expansion construction between Gamchon and Yaechon, test-construction work was done using several modes of hydro-seeding measures to select a suitable construction method through the field survey; the results were as follows : As a result of survey on physio-chemical characteristics of soil, the average soil inclination on ground-raised slopes was from 4.73 mm to 5.37 mm; the average soil acidity was from pH 6.47 to 6.73; the average soil humidity was within the scope of 0.57~1.70 %,; the average soil inclination on ground-cutting slopes was 9.17~10.43mm; the average soil acidity was pH 6.67~6.77 and the average soil humidity was within the scope of 0.53~1.27 %; considered overall, they showed generally satisfactory base materials for plant breeding. As a result of the number of sprouting individuals, the average sprouting number of individuals on test spots executed by Coir net with Seed spray construction methods and the average number of sprouting individuals on other test spots executed by furrow-digging with Seed spray and Straw mat-mulching measures were 1,172 number of per square meter and 970 number of per square meter respectively; thus they showed higher numerical value comparing with other test spots. Likewise, the average number of sprouting individuals on test spots of the ground-cutting slopes executed by Coir net with Seed spray method and the average number of sprouting individuals on other test spot executed by furrow-digger with Seed spray and Straw mat-mulching measures were found to be 1,107 number of per square meter and 1,105 number of per square meter respectively, whose numerical value showed rather higher other test spots. As a result of a survey on living plants' breeding index [dried weight], the weight in dried state on test spots executed by Coir net with Seed spray method and other test spots executed by furrow-digger with Seed spray and Straw mat-mulching measures on both ground-raised and ground-cutting slopes was found to be higher and showed similar characteristics statistically. As a result of survey on the surface-covering degree of ground-raised slopes, nine weeks after test construction, test spots executed by Coir net with Seed spray method and other test spots executed by furrow-digger with Seed spray and Straw mat-mulching measures showed commonly more than 70% of surface-covering degree, but other test spots showed only below 35% of surface covering degree; especially in case of test spots by Verdvol seed spray measures, they showed 10% of the lowest surface-covering. Surface-covering degree on the test spot of ground-cutting slopes nine weeks after test construction showed more than 75% both executed by Coir net with Seed spray construction method and executed by furrow-digger with Seed spray and Straw mat-mulching measures. As a result of survey on appearing plants on the test spots, there dominates Eragrostis curvula both on ground-raised slopes and on ground-cutting slopes with other seeding plant life's lower breeding and there appear intruders, such as Setaria viridis Beauv, Digitaria sanguinalis Scop, and Chenopodium album var.centrorubrum Makino. As for water-borne excavation and soil's washing-away on the slopes, there happened less washing-away and water-borne excavation with good breeding of plant life on test spots executed both by Coir net with Seed spray construction method and by furrow-digger with Seed spray and Straw mat-mulching measures, but there happened much more soil's washing-away along with water-home excavation at the test spot executed by Seed spray with measures. After the research results of test construction sites are examined overall, it's presumed that furrow-digger with Seed spray and Straw mat-mulching measures [interval between lines is 40cm, 5cm in depth] will be preferred to prevent erosion and water-home excavation of slopes located within the construction sites.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.5
• /
• pp.59-66
• /
• 2020

Recently, cultivation and management technologies have been needed to adapt due to climate change, which is causing abnormal weather conditions. One technique is to increase the utilization of evergreen broad-leaved species with high ornamental value. A total of five treatments were installed (1m×22.5m), including 60g/㎡ and 80g/㎡ using two types mulching material with an overlapping and hole-drilling mulching method and these were compared to un-mulching treatment a total of planted 92㎡ attheWol-aTestSiteForestattheForestforBiomaterialsResearchCenterinJinju-si, Gyeongsangnam-dofor 10monthsusing3-years-oldQuercusglaucaThunb. In comparison with the control site, the 60g/㎡ overlapping method was about 1.9 times higher than the root collar diameter, but there was no statistical significance between the treatments. Healthy seedlings were found to meet these conditions due to high biomass values and below and T/R ratios of 3.0 or lower and H/D ratios of 7.0 or lower. Comparing the values of LWR, SWR, and RWR, which can be evaluated for seedling due to the mulching treatments, as compared to the control, the growth of the ground areas including leaves and stems was enhanced, but the growth of the underground areas containing roots tended to have high control values. Based on this, the SQI value, which can be evaluated for the comprehensive quality of seedlings, was found to be significantly different between the control site and the mulching treatment sites, confirming that the growth and growth improvement effects were achieved with mulching treatments. The chlorophyll content analysis showed that there was a significant difference from the control site, and it was judged that weed generation in the control acted as an environmental stress, causing a decrease in chlorophyll content. It was found that the overlapping 80g/㎡ of polypropylene mulching material generated about 4 times fewer weeds than the control, and the manpower required for the mulching test field and weeding were equal at 3.3 people/100㎡/1 day. Mulching treatments have demonstrated a significant difference in the promotion of growth and quality of the seedlings and are judged as an alternative that can reduce the economic burden incurred by the purchase of the supplies and the manpower required to weed forestry plantations.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.6
• /
• pp.556-562
• /
• 2013

The blueberry eco-friendly farming requires the soil condition of pH 4.2 ~ 5.2 and high in organic matters for stable growth. Most of soil types of blueberry-growing land in Korea, however, belongs to alkaline soils with low organic matter content. As a result, the eco-friendly blueberry growers use peat moss and sulfur powder heavily to improve the soil condition, but the guideline on the effective use of organic materials was not established yet. Therefore, this sturdy was performed to investigate the effect of increasing soil acidity and organic matters by using organic materials. Among 5 organic materials, the pH of soil was lowest in degradable sulfur + bentonite (pH 4.1) and followed by Peat moss+Chaff+Pine Needlesmixtures(pH 4.5), OrganicAcid +vinegar (pH 4.7), Sulfur powder (pH 4.8), Temperature response Elutioner (pH 5.2). The soil organic matter content were increased in the following order: Peat moss+Chaff+Pine Needlesmixtures (8.4%) > degradable sulfur + bentonite (7.8%) > Organic Acid + vinegar (7.2%) > Sulfur powder ${\fallingdotseq}$ Temperature response Elutioner (6.3%). Although different in the degree, all organic materials treated was recognized a good material for improving soil pH and organic matter content. The plant height and stem diameter of blueberry were no clear difference among 5 organic materials. Another study was carried out to investigate amending soils with organic matter by soil mulching with pine needles for soil surface management in blueberry organic cultivation. The effect of increasing the soil pH by pine needle mulching in blueberry eco-friendly farming was recognized in four test fields. Pine needle mulching for soil surface management in blueberry appeared several advantages, such as improving of soil pH and organic matter content. Therefore, pineneedle mulching in blueberry organic farming is considered as the most efficient means of mulching cultivation for amending soil pH, weed suppression and moisture conservation among mulching materials.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.2
• /
• pp.105-113
• /
• 2022

Mulching film was produced by LDPE and LLDPE adding biomass byproducts and MA(maleic anhydride), talc/clay/CaO/CaCO₃. And also surveyed to tensile strength, elongation, TGA and DSC according to the UV irradiation time. The tensile strength and elongation showed 20 N/cm² and 5% after UV irradiation 100 hours, and those was nearly 0 N/cm² and 0% after 200 hours, respectively. TGA of film was showed to peak of polymer itself, and DSC was slightly higher than that of initial value. At the pilot scale test, we were able to see the differentiate of degradation between control and developed film after 12 weeks, and also torn off at several part of mulching film. The degradation of mulching film after growing corn showed similar to a pilot scale test. Above the results, the developed mulching film adding biomass will be to used for agricultural farming.

• Korean Journal of Agricultural Science
• /
• v.47 no.1
• /
• pp.43-58
• /
• 2020

Mulching plastic is used for the purpose of maintaining soil temperature, moisture, and weed and pest prevention in agriculture. Any remaining plastic after use may contaminate the soil and damage crop growth. To solve this problem, mulching plastic wrappers have been studied and developed, but the actual use rate is quite low due to their poor performance and frequent tearing of the plastic on the field. In this study, we developed a tractor attachable mulching plastic wrapper to minimize the tearing of the mulched plastic. The developed mulching plastic wrapper consists of hydraulic motors and pumps, valves, a microcontroller, and sensors. The collecting speed of the plastic mulch was calculated considering the tractor's travel speed and the radius of the collecting drum. A proportional controller was designed to control the rotating speed of the hydraulic motor as the plastic was wound around the collection drum and the radius increased. The performance of an indoor experiment was quite promising because the difference between the collecting speed predicted by the calculation and the actual collecting speed was 2.71 rpm. Based on a field verification test, the speed difference was max. 14.28 rpm; thus, the, proportional integral derivative (PID) controller needs to be considered to control the drum speed precisely. Another issue was found when the soil covered at the edge of the plastic was hardened or the road surface was uneven, the speed control was unstable, and the plastic was torn. In future research, vibrational plows will be equipped to break-up the harden soil for collecting the plastic smoothly.