• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.58-60
• /
• 1999

In the industrial field the necessity of the linear motion is increasing. We selected a moving magnet coreless type LDM, which have the advantages, such as long stoke, brushless, no cogging force. Actually, the design is accomplished using FEM analysis for the basic configuration of a magnetic circuit, and characteristic equations for coil design. In the course of design, we have estimated airgap flux density and thrust. We fabricated coreless type LDM and experimented static test. We compared measurement values with FEM analysis values.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.12
• /
• pp.1529-1534
• /
• 2013

A voice coil actuator with a rotating moving magnet has been developed for a miniaturized mobile robot. The actuator has simple structure comprising a magnet, a coil, and a yoke. Actuator performance is predicted using a linearized theoretical model, and dynamic performance based on the air-gap between the magnet and the coil is predicted using motor constant and restoring constant obtained through finite element simulations. The theoretical model was verified using a prototype with 60 Hz resonance and 80 Hz bandwidth. We found that an input of 1.5 V can make the actuator rotate by $20^{\circ}$ statically. The driving configuration of the proposed actuator can be simplified because of its implementation of open-loop control.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.115-117
• /
• 2006

The detent force by end-effect has a bad influence on moving coil type Permanent Magnet Linear Synchronous Motor(PMLSM). So, the reduction of detent force by end-effect is especially required for improvement of thrust characteristics. In this paper, in order to reduce detent force by end-effect the auxiliary teeth is installed at the end part of mover and it is optimized by using neural network.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.788-793
• /
• 2002

Hybrid type slim tilt actuator and 6-wire supported are developed for DVD recording in the optical disc drive of notebook PC, which can compensate the inclination of disc and objective lens. The hybrid actuator uses the actuating method of moving coil in the focus and track direction and that of moving magnet in the tilt direction. Comparing with 6-wire supported actuator and hybrid type actuator, we can choose an actuator for slim super combo pickup. Two actuator are designed through the modal analysis and magnetic field analysis and experimental results shows dynamic characteristics. Finally, it is verified that the actuator can compensate the disc tilt of ${\pm}0.4^{\circ}$.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.105-107
• /
• 1999

This paper presents results of FEA and tests on the characteristics of moving coil type LOA due to the static field excitation method. In case the static field is generated by NdFeB permanent magnet, the static thrust is almost 6 times than that by electromagnet. Therefore under the same power, the volume becomes small according to using permanent magnet for the generation of static field.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.742-744
• /
• 2001

Moving flat core LOA consists of iron flat core as a mover and electric magnet as a stator and operated by electromagnetic force between mover and stator. In a moving flat core type, it takes advantage of doing not have to be equipped with power supply device, having a lower manufacturing cost. But it has a lower linearity and precision. In this paper, a static characteristics of LOA were studied and analyzed using FEA. Experiments, electromagnetic force and inductance according to air gap and input currents, were carried by exciting coil. And we compared these results one another.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.198-200
• /
• 2009

This paper presents the numerical simulation results on the moving type electrodynamic suspension (EDS) simulator. Superconducting EDS system is generated by the interaction between the magnetic field made by the induced the eddy current in the ground conductor and the moving magnetic field made by onboard superconducting magnet. The levitation force of EDS system, which is proportional to the strength of the moving magnetic field, becomes saturated according to the increase of the velocity Especially, the levitation force is influenced by the structure of HTS magnet and ground conductor. The 3-D numerical analysis with FEM was used to find the distribution of the magnetic field, the optimal coil structure, and the calculation of the levitation force.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.614-616
• /
• 2001

This paper describes the current control simulation of the Linear Oscillatory Actuator and then, the dynamic simulation algorithm considering the armature reaction effect. Thirdly, the control algorithm is proposed to reciprocate a load without mechanical spring at the required stroke and position.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.284-286
• /
• 2000

This paper presents the results of monitoring for measuring characteristics of Linear Oscillatory Actuator we used LabVIEW software. The results is divided into two parts, thats is part for electrical quantity calculation, mechanical quantify calculation detecting part.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2943-2946
• /
• 2003

In this paper are described the indirect induction healed boiler and induction boated hot air producer using the voltage-fed series resonant high-frequency inverter which can operate in the frequency range from 20［kHz］to 50［kHz］. A specially designed induction heater, which is composed of laminated stainless assembly with many tiny holes and interconnected spot welding points between stainless plates, is inserted into the ceramic type vessel with external working coil. This working coil is connected to the inverter and turbulence fluid through this induction heater to moving fluid generates in the vessel. The operating performances of this unique appliance in next generation and its effectiveness are evaluated and discussed from a practical point of view.