• 드라이브 ㆍ 컨트롤
• /
• 제18권2호
• /
• pp.38-45
• /
• 2021

In recent years, the demand for an onboard scale system which can directly monitor load distribution and overload of vehicles has increased. Depending on the suspension type of the vehicle, the onboard scale system could use different types of sensors, such as, angle sensors, pressure sensors, load cells, etc. In the case of a vehicle equipped with leaf spring suspension system, the load of the vehicle is measured by using the deflection or displacement of the leaf spring. Leaf springs have hysteresis characteristics that vary in displacement depending on the load state. These characteristics cause load measurement errors when moving or removing cargoes. Therefore, this study aimed at developing an onboard scale device for cargo vehicles equipped with leaf springs. A sectional modeling method which can reduce measurement errors caused by hysteresis characteristics was also proposed.

• 대한산업공학회지
• /
• 제16권2호
• /
• pp.23-36
• /
• 1990

A unit-load automated guided vehicle system is considered in which a single vehicle is operated on a unidirectional path in a closed loop. The vehicle serves a manufacturing cell moving pallets from one station to another based on the "First-Encountered-First-Serve" dispatching rule. An approximation method is developed to compute the mean waiting time of an arbitrary pallet at each station. Extensive numerical experiments, performed for various problems, yield fairly good results in most of the cases compared with those obtained by simulation method.

• 한국도로학회논문집
• /
• 제10권1호
• /
• pp.135-144
• /
• 2008

주행하는 차량이 도로포장에 가하는 동적 하중은 포장표면의 거칠기에 따라 그 크기가 변화하게 되며 설계하중보다 큰 하중이 재하 될 경우에는 포장의 공용성에 영향을 미치게 된다. 따라서 본 논문에서는 포장표면의 평탄성에 대한 지불규정을 시방에 적용하여 포장의 성능 및 품질향상을 도모하기 위한 기본연구로써 도로포장의 표면에 거칠기가 있을 때 주행차량에 의한 동적 하중 크기의 변화를 분석하였다. 먼저 평탄성이 좋지 않은 오래된 포장과 평탄성이 좋은 새로운 포장에서 구한 평탄성 데이터를 이용하여 구조해석을 수행함으로써 이러한 포장에서 차량이 주행할 때 동적 하중의 크기 변화를 비교 분석하였다. 그리고 차량속도와 표면 거칠기의 진폭 및 파장이 차량 동적 하중 크기에 미치는 영향을 가상의 평탄성 데이터를 구성하여 분석하였다. 이러한 표면 거칠기에 의한 동적 차량하중 크기의 증가는 포장의 응력 및 변형률에 영향을 미치며 궁극적으로 포장의 공용성과 연관되기 때문에 표면 거칠기와 포장의 공용성과의 관계를 유출하는 방법을 제시하였다

• Interaction and multiscale mechanics
• /
• 제4권4호
• /
• pp.273-289
• /
• 2011

The vibration response of the bridges under the moving vehicular load is of importance for engineers to estimate the serviceability of existing bridges and to design new bridges. This paper deals with the three dimensional vibration analysis of prestressed concrete bridges under moving vehicles. The prestressed bridges are modeled by four-node isoparametric flat shell elements with the transverse shearing deformation taken into account. The usual five degrees-of-freedom (DOFs) per node of the element are appended with a drilling DOF to accommodate the transformation of the local stiffness and mass matrices to the global coordinates. The vehicle is modeled as a single or two-DOF system. A single-span prestressed Tee beam and two-span prestressed box-girder bridge are studied as the two numerical examples. The effects of prestress forces on the natural frequencies and dynamic responses of the bridges are investigated.

• 한국도로학회논문집
• /
• 제8권1호
• /
• pp.119-130
• /
• 2006

본 연구는 연속철근콘크리트포장이 주행 차량하중을 받을 때의 거동을 분석하고 철근비가 이러한 거동에 미치는 영향을 연구하기 위하여 수행되었다. 0.6. 0.7. 0.8%의 다른 철근비를 가진 단면을 대상으로 차량하중이 가하질 때의 연속철근콘크리트포장의 거동과 밀접한 연관이 있는 균열부에서의 하중전달률을 평가하여 비교 분석하고, 또한 주행하는 트럭하중에 대한 콘크리트 슬래브의 응력을 비교 분석하여 철근비가 차량하중에 대한 연속철근콘크리트포장의 거동에 미치는 영향을 연구하였다. 균열부에서의 하중전달률을 구하기 위하여 Falling Weight Deflectometer (FWD) 충격하중 재하시험을 수행하였으며 컬링 현상으로 인하여 횡방향균열에서 하중전달효과가 변화하는지 파악하기 위하여 FWD 충격하중 재하시험을 하루 중 다른 세 가지 시간에 수행하였다. 또한 콘크리트 슬래브 및 분리층의 동적 변형률을 측정하기 위하여 차량 동적하중 재하시험을 수행하였다. 연구 결과 연속철근콘크리트포장의 횡방향균 열부에서의 하중전달률은 대체적으로 매우 높으며 측정시간(또는 온도변화)에 따른 변화는 매우 작아 뚜렷한 특징이 없으며 철근비가 다른 구간에서도 뚜렷한 차이가 없었다. 그리고 차량속도가 증가하면 콘크리트 슬래브와 분리층의 변형률이 감소하는 경향을 보였으며 주행이격이 생기면 변형률이 감소하였으나 철근비의 변화에 따른 차량 동적하중에 대한 연속철근콘크리트포장의 변형률의 변화는 뚜렷하지 않았다.

• Smart Structures and Systems
• /
• 제24권5호
• /
• pp.617-630
• /
• 2019

Currently most of the vision-based structural identification research focus either on structural input (vehicle location) estimation or on structural output (structural displacement and strain responses) estimation. The structural condition assessment at global level just with the vision-based structural output cannot give a normalized response irrespective of the type and/or load configurations of the vehicles. Combining the vision-based structural input and the structural output from non-contact sensors overcomes the disadvantage given above, while reducing cost, time, labor force including cable wiring work. In conventional traffic monitoring, sometimes traffic closure is essential for bridge structures, which may cause other severe problems such as traffic jams and accidents. In this study, a completely non-contact structural identification system is proposed, and the system mainly targets the identification of bridge unit influence line (UIL) under operational traffic. Both the structural input (vehicle location information) and output (displacement responses) are obtained by only using cameras and computer vision techniques. Multiple cameras are synchronized by audio signal pattern recognition. The proposed system is verified with a laboratory experiment on a scaled bridge model under a small moving truck load and a field application on a footbridge on campus under a moving golf cart load. The UILs are successfully identified in both bridge cases. The pedestrian loads are also estimated with the extracted UIL and the predicted weights of pedestrians are observed to be in acceptable ranges.

• Smart Structures and Systems
• /
• 제31권2호
• /
• pp.155-169
• /
• 2023

The quasi-static component of the moving vehicle-induced dynamic response is promising in damage detection as it is sensitive to bridge damage but insensitive to environmental changes. However, accurate extraction of quasi-static component from the dynamic response is challenging especially when the vehicle velocity is high. This paper proposes an adaptive quasi-static component extraction method based on the modified variational mode decomposition (VMD) algorithm. Firstly the analytical solutions of the frequency components caused by road surface roughness, high-frequency dynamic components controlled by bridge natural frequency and quasi-static components in the vehicle-induced bridge response are derived. Then a modified VMD algorithm based on particle swarm algorithm (PSO) and mutual information entropy (MIE) criterion is proposed to adaptively extract the quasi-static components from the vehicle-induced bridge dynamic response. Numerical simulations and real bridge tests are conducted to demonstrate the feasibility of the proposed extraction method. The results indicate that the improved VMD algorithm could extract the quasi-static component of the vehicle-induced bridge dynamic response with high accuracy in the presence of the road surface roughness and measurement noise.

• 산업경영시스템학회지
• /
• 제32권1호
• /
• pp.44-51
• /
• 2009

A bonded warehouse is the warehouse located in bonded area. It functions not only as a general warehouse but also as a place for managing the work related to import and export bonded goods. As a general warehouse, it uses the rack system to store the goods and the folk lift truck to move the unitized goods. The operation of the storing system closely related to the efficiency of space uses in a warehouse and vehicle working. Thus, vehicle performance measured in distance units in the ware-house could be used as one of the key performance measure in warehouse system. This paper focuses on the operation efficiency of the bonded warehouse which uses rack system for the storing and the folk lift truck for moving goods. The method of load allocation for balancing the rack uses and vehicle operation for maximizing efficiency are the specific concerns in this paper. The simulation study is conducted to find a policy for efficient vehicle operation based on balanced rack utilization, and the favorable result for the system operation would lead the usable proposal in vehicle operation.

• 대한토목학회논문집
• /
• 제31권3A호
• /
• pp.163-172
• /
• 2011

CFTA 거더는 아치형상을 갖는 콘크리트 충전 강관구조이며 초기처짐 및 공용 중 응력제어를 위해 외부긴장재를 배치한 거더 형식이다. 본 연구에서는 차량진행에 따른 거더의 동적거동에 긴장재가 미치는 영향을 분석하였다. 이를 위해 유한요소 프로그램을 이용하여 거더 및 긴장재 등을 수치모델링하였으며 긴장재의 양과 긴장력을 다양한 값으로 변화시켰다. 차량하중은 도로교설계기준의 DB-24 하중을 고려하였으며 3축-2트랙으로 모델링하였다. 차량하중은 등가절점하중으로 적용시켰으며 차량하중의 이동은 차량통과 시간 및 절점수를 고려한 각 절점에서의 시간함수로 나타내었다. 차량속도는 40 km/hr에서 100 km/hr까지 20 km/hr씩 증가시켰다. 해석결과 긴장재의 긴장력 변화는 거더의 동적거동에 영향을 주지않았으며 초기처짐에만 영향을 주었다. 긴장재의 양에 따라서는 거더의 동적거동이 다르게 나타났으며 긴장재의 양이 적을수록 동적처짐은 증가하였다. 이를 바탕으로 거더의 동적증폭계수(DAF)를 산출하였으며 긴장재가 없는 경우에도 AASHTO LRFD와 도로교 표준시방서에서 정한 기준값보다 매우 작은 안정적인 거동을 보였다.

• Structural Engineering and Mechanics
• /
• 제46권5호
• /
• pp.713-734
• /
• 2013

Bridges are vital components of the railroads. High speed of travel, the periodic and oscillatory nature of the loads and the comparable vehicle bridge weight ratio distinguish the railway bridges from the road bridges. The close proximity between estimations by some numerical methods and the measured data for the bridge-vehicle dynamic response under the moving load conditions has boosted the confidence in the numerical analyses. However, there is hardly any report regarding the responses of the railway bridges under the effect of the trains entering from the opposite directions while running at unequal speed and having dissimilar geometries. It is the purpose of this article to present an analytical method for the dynamic analysis of the railway bridges under the influence of two opposing series of moving loads. The bridge structural damping and many modes of vibrations are included. The concept of modal superposition is used to solve for the system motion equations. The method of solution is indeed a computer assisted analytical solution. It solves for the system motion equations and gives output in terms of the bridge deflection. Some case studies are also considered for the validation of the proposed method. Furthermore, the effects of varying some parameters such as the distance between the bogies, and the bogie wheelset distance are studied. Also, the conditions of resonance and cancellation in the dynamic response for a variety of vehicle-bridge specifications are investigated.