• 한국ITS학회 논문지
• /
• 제15권4호
• /
• pp.153-160
• /
• 2016

영상취득 장치를 이용한 지능화된 감시 장치의 개발 기술 또한 발전하고 있다. 비교적 고속으로 움직이는 객체를 탐지해야 하는 분야에서 무엇보다 중요한 것은 배경영상 갱신에 대한 부하를 효과적으로 줄여서 실시간적으로 갱신할 수 있어야 하는데 현재 범용 컴퓨터 능력으로는 질감 등을 특징으로 추출하는 방법 등은 대부분 연산처리의 부하 때문에 적용상의 한계가 있다. 본 논문에서는 적어도 초당 30프레임의 카메라 영상에서 주행 중인 자동차와 같이 고속으로 움직이는 객체를 탐지하는 응용영역에서 실시간으로 배경 영상을 갱신하는 알고리즘을 제시하고, 실제 입력영상에서 객체 영역을 추출하는 시험을 통해 성능을 분석하였다.

• Structural Engineering and Mechanics
• /
• 제82권1호
• /
• pp.31-40
• /
• 2022

In structural engineering, the material properties of the structures such as elastic modulus, shear modulus, density, and size may not be deterministic and may vary at different locations. The dynamic response analysis of such structures may need to consider these properties as stochastic. This paper introduces a stochastic finite element method (SFEM) approach to analyze moving loads problems. Firstly, Karhunen-Loéve expansion (KLE) is applied for expressing the stochastic field of material properties. Then the mathematical expression of the random field is substituted into the finite element model to formulate the corresponding random matrix. Finally, the statistical moment of the dynamic response is calculated by the point estimation method (PEM). The accuracy and efficiency of the dynamic response obtained from the KLE-PEM are demonstrated by the example of a moving load passing through a simply supported Euler-Bernoulli beam, in which the material properties (including elastic modulus and density) are considered as random fields. The results from the KLE-PEM are compared with those from the Monte Carlo simulation. The results demonstrate that the proposed method of KLE-PEM has high accuracy and efficiency. By using the proposed SFEM, the random vertical deflection of a high-speed railway (HSR) bridge is analyzed by considering the random fields of material properties under the moving load of a train.

• Structural Engineering and Mechanics
• /
• 제91권2호
• /
• pp.227-238
• /
• 2024

Sparse regularization methods have proven effective in addressing the ill-posed equations encountered in moving force identification (MFI). However, the complexity of vehicle loads is often ignored in existing studies aiming at enhancing MFI accuracy. To tackle this issue, a double 𝑙₁ regularization method is proposed for MFI based on a response spectrum-based weighted dictionary in this study. Firstly, the relationship between vehicle-induced responses and moving vehicle loads (MVL) is established. The structural responses are then expanded in the frequency domain to obtain the prior knowledge related to MVL and to further construct a response spectrum-based weighted dictionary for MFI with a higher accuracy. Secondly, with the utilization of this weighted dictionary, a double 𝑙₁ regularization framework is presented for identifying the static and dynamic components of MVL by the alternating direction method of multipliers (ADMM) method successively. To assess the performance of the proposed method, two different types of MVL, such as composed of trigonometric functions and driven from a 1/4 bridge-vehicle model, are adopted to conduct numerical simulations. Furthermore, a series of MFI experimental verifications are carried out in laboratory. The results shows that the proposed method's higher accuracy and strong robustness to noises compared with other traditional regularization methods.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권1호
• /
• pp.129-138
• /
• 2004

본 연구는 현장 계측 실험에 의하여 주행 차량하중을 받는 2경간 P.S.C. 박스형 교량의 동적 해석을 수행하였다. 본 연구에서 적용한 이동하중은 차량 속도의 증가에 대해 주행하중, 급제동하중, 연행하중, 역주행하중, 역 주행 충격하중 등으로 분류하여 실험을 행하였다. 각 주행 하중에 대해 박스 거더 단면에서의 계측위치를 달리하여 동적 거동의 변화 및 특성을 살펴보았으며, 절점당 6개의 자유도를 갖는 4절점 쉘요소를 이용한 유한요소 해석 프로그램을 개발하고 수치해석을 하여 실험결과와 비교 분석하였다. 박스 거더의 동적 거동은 주행하중에 의한 응답보다 급제동이나 역주행 충격하중에 의한 응답이 더 크게 나왔으며 수치해석 결과는 기존의 1차원 보요소를 사용하여 해석한 결과보다 실험값에 근접함을 보였다.

• 소음진동
• /
• 제3권1호
• /
• pp.57-63
• /
• 1993

The dynamic response of stiffened rectangular plate subjected to a concentrated force or mass moving at constant speed is analyzed by using finite- element method. Stiffened plates are modelled as an assembly of isotropic thin plate elements and equivalent Euler beam ones, in which the beam elements represent the stiffener effects concentrated at the attached lines of stiffeners to the plates. The Newmark's time integration method is used to obtain the dynamic response of stiffened plates. Numerical examples are given to verify the validity of the presented method and also to investigate the effects of speed and moving mass on the dynamic characteristics of stiffened plates.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.561-566
• /
• 2008

Recently, because of development of the high speed train technology, the vibration loads by train is significantly increased ever than before. This buried gas pipelines are exposed to both repeated impact loads, and, moreover, they have been influencing by vibration loads than pipeline which is not located under vehicle loads. The vibration characteristic of pipeline is examined by dynamic analysis, and variable is only train speed. Since an effect of magnitude of vibration loads is more critical than cover depth, as increasing the train speed, the vibration speed of buried pipelines is also increased. The slope of vibration velocity is changed by attenuation of wave, at train speed, 300 km/h. From the analysis results, the vibration velocity of pipelines is satisfied with the vibration velocity criteria which are established by Korea Gas Corporation. The results present operation condition of pipelines under rail loads has fully sound integrity based on KOGAS specification.

• Wind and Structures
• /
• 제25권1호
• /
• pp.63-77
• /
• 2017

When railway vehicles run by towers of long span bridges, the railway vehicles might experience a sudden load-off and load-on phenomenon in crosswind conditions. To ensure the running safety of the railway vehicles and the running comfort of the passengers, some studies were carried out to investigate the impacts of sudden changes of aerodynamic loads on moving railway vehicles. In the present study, the aerodynamic coefficients which were measured in wind tunnel tests using a moving train model are converted into the aerodynamic coefficients in the actual scale. The three-component aerodynamic loads are calculated based on the aerodynamic coefficients with consideration of the vehicle movement. A three-dimensional railway vehicle model is set up using the multibody dynamic theory, and the aerodynamic loads are treated as the inputs of excitation varied with time for kinetic simulations of the railway vehicle. Thus the dynamic responses of the railway vehicle passing by the bridge tower can be obtained from the kinetic simulations in the time domain. The effects of the mean wind speeds and the rail track positions on the running performance of the railway vehicle are discussed. The three-component aerodynamic loads on the railway vehicle are found to experience significant sudden changes when the vehicle passes by the bridge tower. Correspondingly, such sudden changes of aerodynamic loads have a large impact on the dynamic performance of the running railway vehicle. The dynamic responses of the railway vehicle have great fluctuations and significant sudden changes, which is adverse to the running safety and comfort of the railway vehicle passing by the bridge tower in crosswind conditions.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.350-355
• /
• 2008

This paper addresses vibration comfort evaluation on suspension bridge subjected to moving vehicles. The moving load method is commonly employed for the analysis, even though it is less accurate than the moving mass approach which considers vehicle-bridge interaction effects and roughness of the pavement. In this study, a parametric study on modeling method by means of the moving load technique, such as the number of modes included in the analysis, types of moving loads, and length of the stiffening girder, is carried out. The numerical result indicated that use of the triangular pulse load may result in significant overestimation on vibration discomfortness.

• 한국전산유체공학회지
• /
• 제11권3호
• /
• pp.64-70
• /
• 2006

A Computational study was carried out in order to investigate the moving wall effect of a circular cylinder at a Reynolds number of $2.0{\times}10^4$. The viscous-incompressible Navier-Stokes equations and Spalart-Almaras turbulent model of the commercial CFD code were adopted for this numerical analysis. The moving wall was set parallel with the freestream, and moving speed was equal to the freestream velocity. The gap ratio is defined as the distance ratio between the circular cylinder diameter and the height from the moving wall. The results show that there is vortex shedding over the critical gap ratio and aerodynamic loads including amplitude and the Strouhal number change according to the gap ratio.

• 한국도로학회논문집
• /
• 제8권1호
• /
• pp.119-130
• /
• 2006

본 연구는 연속철근콘크리트포장이 주행 차량하중을 받을 때의 거동을 분석하고 철근비가 이러한 거동에 미치는 영향을 연구하기 위하여 수행되었다. 0.6. 0.7. 0.8%의 다른 철근비를 가진 단면을 대상으로 차량하중이 가하질 때의 연속철근콘크리트포장의 거동과 밀접한 연관이 있는 균열부에서의 하중전달률을 평가하여 비교 분석하고, 또한 주행하는 트럭하중에 대한 콘크리트 슬래브의 응력을 비교 분석하여 철근비가 차량하중에 대한 연속철근콘크리트포장의 거동에 미치는 영향을 연구하였다. 균열부에서의 하중전달률을 구하기 위하여 Falling Weight Deflectometer (FWD) 충격하중 재하시험을 수행하였으며 컬링 현상으로 인하여 횡방향균열에서 하중전달효과가 변화하는지 파악하기 위하여 FWD 충격하중 재하시험을 하루 중 다른 세 가지 시간에 수행하였다. 또한 콘크리트 슬래브 및 분리층의 동적 변형률을 측정하기 위하여 차량 동적하중 재하시험을 수행하였다. 연구 결과 연속철근콘크리트포장의 횡방향균 열부에서의 하중전달률은 대체적으로 매우 높으며 측정시간(또는 온도변화)에 따른 변화는 매우 작아 뚜렷한 특징이 없으며 철근비가 다른 구간에서도 뚜렷한 차이가 없었다. 그리고 차량속도가 증가하면 콘크리트 슬래브와 분리층의 변형률이 감소하는 경향을 보였으며 주행이격이 생기면 변형률이 감소하였으나 철근비의 변화에 따른 차량 동적하중에 대한 연속철근콘크리트포장의 변형률의 변화는 뚜렷하지 않았다.