• The Korean Journal of Physiology
• /
• v.17 no.1
• /
• pp.37-43
• /
• 1983

Electromyographic analysis was made in the forearm to clarify the prime mover of the wrist joint in flexion and extension. Loads of 5 and 10 pounds were given to the hand during isometric and isotonic contraction. The results of this study were summarized as follows: 1) M. flexor carpi ulnaris and m. extensor carpi radialis acted as the prime mover during flexion and extension, respectively, of the wrist joint. 2) The flexor and the extensor of the forearm showed synergistic activities under isotonic contraction, but under isometric contraction the flexor only acted. 3) Muscular activity during the isotonic contraction slightly increased compared with the isometric contraction. 4) EMGs and integrated EMGs were somewhat enhanced as the load increased, but there was no significant difference between 5 and 10 pounds load.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1479-1480
• /
• 2011

In this paper, a novel design ultrasonic linear motor is proposed. The proposed motor consists of a ring type stator and a mover. They have spirals on their inner and outer surface, respectively. Along the spiral, a mover is travelled by a travelling extensional vibration mode of a ring type stator. Hence, a linear up-and-down motion is generated. Through the experimental data, we can verify the applicability regarding the autofocus lens drive.

• Journal of Power Electronics
• /
• v.4 no.3
• /
• pp.169-179
• /
• 2004

This paper presents the steady-state analysis of the three-phase self-excited induction generator (SEIG). The three-phase SEIG with a squirrel cage rotor is driven by a variable-speed prime mover (VSPM) or a constant-speed prime mover (CSPM) such as a wind turbine or a micro gas turbine. Furthermore, a PI closed-loop feedback voltage regulation scheme of the three-phase SEIG driven by a VSPM on the basis of the static VAR compensator (SVC) is designed and evaluated for the stand-alone AC and DC power applications. The simulation and experimental results prove the practical effectiveness of the additional SVC with the PI controller-based feedback loop in terms of its fast responses and high performances

• Journal of Mechanical Science and Technology
• /
• v.17 no.11
• /
• pp.1616-1627
• /
• 2003

This paper describes a mini linear optical pickup actuator. To reduce the size, inner yokes are designed to guide the mover and outer yokes of permanent magnets are removed. Magnetic circuit method is used to determine the thrust force. Virtual path method is proposed to analyze the open magnetic circuit analysis. The magnetic circuit of the proposed actuator can be a closed circuit due to the virtual path model of the outer magnetic flux. The validity of virtual path method is evaluated by comparing to the FEM analysis. Structural vibration is investigated using FEM and the design of the mover is modified to improve the vibration characteristic. Dynamic characteristic experiments shows that the performance of the proposed actuator is enough to be used as a coarse and fine seeking actuator simultaneously and the thrust force margin for loading a focusing actuator is guaranteed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.794-798
• /
• 2002

This paper deals with a moving coil type linear motor for fast access of the miniature ODD. This slim-line motor is composed of the mover supported by guide mechanism, the coil wound into it, and the yoke attached to the permanent magnet for stator. The driving force is generated by the PM of the stator and the current in the coils of the mover. Magnetic circuit analysis and Finite Element Method are applied to estimate the thrust force at air gap. In order to compare the force characteristics between two methods, various experiment results are applied to verify on a prototype. Also the flexible modes of the motor are predicted through the FEM and the structural components are modified to locate this on high frequency region.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.742-744
• /
• 2001

Moving flat core LOA consists of iron flat core as a mover and electric magnet as a stator and operated by electromagnetic force between mover and stator. In a moving flat core type, it takes advantage of doing not have to be equipped with power supply device, having a lower manufacturing cost. But it has a lower linearity and precision. In this paper, a static characteristics of LOA were studied and analyzed using FEA. Experiments, electromagnetic force and inductance according to air gap and input currents, were carried by exciting coil. And we compared these results one another.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2754-2757
• /
• 1999

This paper describes the development of the linear pulse motor (herea-fter, LPM) and the driver system to control the quantity of fuel in the nuclear furnace. The LPM developed in this study is a kind of the linear motor with the properties of moving up and down, and both the stator and the mover of the LPM are designed as the salient type. Especially, the stator has windings but there is no windings or magnet on the mover. To Maximize the characteristics of the LPM, we chose the asymmetric bridge converter as the driving system for LPM.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.378.2-378
• /
• 2002

This paper deals with a moving coil type linear motor for fast access of the miniature ODD. This slim-line motor is composed of the mover supported by guide mechanism, the coil wound into it, and the yoke attached to the permanent magnet for stator. The driving force is generated by the PM of the stator and the current in the coil of the mover. Magnetic circuit analysis and Finite Element Method are applied to estimate force at air gap. (omitted)

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1359-1360
• /
• 2015

본 논문에서는 FAST 코너점과 EMD를 이용한 다수의 이동물체 식별 알고리즘을 제안한다. 제안하는 방법은 먼저 영상 내의 이동물체를 추출하기 위한 기법으로 GMM을 기반으로 배경을 모델링 하며, 모델링 된 배경에서 추출된 이동물체를 인식하기 위해 라벨링 기법을 수행한다. 그 다음 인식된 다수의 이동물체 식별을 위해 FAST 코너점과 색상 기반의 EMD 알고리즘을 융합한 다수의 이동물체 식별 방법을 제안하며, 최종적으로, 실내 환경 내에서의 실험을 통해 제안한 방법의 응용 가능성을 증명한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.76-83
• /
• 2003

To cope with stringent performance targets requested in many fields spanning the whole range of industry, the driver is necessary to realize large dynamic range as well as nano resolution, manipulate the mover orientation without additional driver, and be suitable for clean environment. As one of those purposes, authors have developed the planar precision stages with the integrated operating principle of levitation and propel. In this paper, we discuss potential of magnetic suspension technology by comparing various features of non-contact planar stages, that is, repulsive type of surface actuator and attractive type of surface actuator.