• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1997년도 총회 및 춘계 학술발표회 논문집
• /
• pp.30-38
• /
• 1997

고속도로변에 설치된 retention pond는 drainage system의 일부분으로 우기에 빗물의 양을 조절하고 고속도로 노면에서 운반되어 retention pond에 유입된 오염된 입자를 침전, 제거시키기 위해 설치되었다. 빗물에 입자상태로 이동된 납, 아연, 카드뮴를 제거하기 위해 설치된 retention pond의 효과를 평가하기 위해 수리지질학적 연구 및 부유퇴적물의 물리화학적 특징을 규명하기 위한 연구가 수행되었다. 부유퇴적물과 비교하기 위해 심하게 오염된 roadside soil과 오염되지 않은 background soil에 대해서도 연구가 수행되었다. 부유퇴적물의 중금속함량은 background Sologne soil에 비해 원소에 따라 2-8배 높다. 그러나, roadside soil의 중금속함량은 부유퇴적물에 비해 7-26배 높다. Sequential extraction methods를 이용하여 분석한 결과 심하게 오염된 roadside soil에 존재하는 납, 아연, 카드뮴은 대부분 쉽게 용해될 수 있는 상태 (Fraction FII, FIII)로 존재하며 반면에 규산염광물과 수반되는 금속함량의 비율은 매우 낮다. 부유퇴적물에서는 규산염광물과 수반되는 금속함량이 전체 금속함량의 1/3까지 크게 증가한다. Roadside soil 과 부유퇴적물사이의 중금속함량 차이가 매우 큰 것은 중금속의 대부분이 retention pond에 이르기 전에 고속도로변과 배수로 일부에 축적되어 모두 상실하기 때문이다.

• 한국안전학회지
• /
• 제30권6호
• /
• pp.132-138
• /
• 2015

This study examined the relative effects of feedback frequency and specificity of Eco-IVIS(eco in-vehicle information system) on the fuel-efficiency and workload. Eighty participants randomly assigned into four experimental groups (high frequency/specific, high frequency/global, low frequency/specific, and low frequency/global feedback) and they drove 16.4Km motorway under the each feedback condition. The dependent variable were fuel efficiency and Drive Activity Load Index which measured participants' subjective ratings of driving workload. The results showed that high frequent feedback was more effective for increasing fuel-efficiency than low frequent feedback, however, there was no significant difference of fuel-efficiency between specific and global feedback. Although, overall DALI score was comparable among four experimental conditions, visual demand score was significant higher under the high frequent feedback condition than low frequent feedback.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.550-555
• /
• 2011

The road traffic noise has emerged major noise as the overcrowding of the urban population and the explosion of car storage capacity. There are limits for establishing the measures to meet noise standard because of the increase of high-rise building and insufficient distance between residential areas and road in urban center areas. Therefore, this study analyze the problem of the application of national road noise standard, and present the alternatives to achieve environmental standards in conjunction with the soundproofing measures. To reduce the population ratio exposed to road noise on seoul motorway, we suggest some action plane are as follows: i) Roadside noise standard of nighttime beside daytime is the first noise reduction goals ii) Noise standard of Noise and vibration control act is priority in case of existing area iii) Noise standard of basic environmental policy act is priority in case of new area.

• 한국분무공학회지
• /
• 제22권4호
• /
• pp.218-224
• /
• 2017

In order to improve the quality of air in urban areas, the emission regulations are being strengthened by the government. The on-road test of light-duty vehicles was started with PEMS because certification test mode does not sufficiently reflect on-road conditions. Therefore, The PEMS-based test was implemented from Sep. 2017 in Europe and Korea. However, this is lack of data on various on-road patterns in Korea. The purpose of the present study has analyzed the effect of speed per acceleration and acceleration on NOx emission on-road driving. The test route consisted of urban, rural, and motorway in Seoul. This study has been conducted by Euro-6 vehicles using on SCR system with PEMS. The on-road emission characteristics were evaluated by moving averaging windows (MAW) method. In results, RDE-NOx by severe driving pattern has been 1.4 times higher than soft driving pattern NIER Route 1.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.545-547
• /
• 2018

고속도로 졸음쉼터의 사고예방효과로 인하여 각종 편의시설물의 확대 설치 및 관리의 중요성이 더욱 커져가고 있는 실정이다. 원거리에 위치한 졸음쉼터 화장실을 기반으로 IoT기술을 이용한 관리시스템을 도입함으로써 관리주체인 한국도로공사의 효율적인 관리체계 마련뿐만 아니라 적절한 예산을 투입함으로써 이용객들에게 쾌적한 환경조성과 관리자들에게 편리한 시스템을 제공을 할 수 있다. 이에 본 논문에서는 관련 사례를 분석하고 스마트 졸음쉼터를 운영하는 방안에 대하여 연구를 수행하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.33-42
• /
• 2005

Studies on community annoyance caused by transportation noise exposure were carried out in fifty-one areas around Gimpo and Gimhae international airports, Gyungbu and Honam railway lines and east and riverside-northen motorway to accumulate social survey data and to assess the relationship between each transportation noise level and degree of annoyance in Korea. The measurements of transpotation noise were carried out using portable precision sound level meters (B&K type 2238 and LD 812) except in aircraft noise. Aircraft noise levels were measured automatically by airport noise monitoring system, B&K type 35n Social surveys were carried out to people living around noise measurement points. Questionnaires were only aggregated by face-to-face interviews using various questions concerned with demographic factors, degree of noise annoyance, interference with daily activities and health-related symptoms. The questions of noise annoyance were answered on an 11-point numerical scale. The respondents, from 18 to 70 years of age, were randomly selected and completed the questionnaire for themselves. The total number of respondents for the questionnaires was 1,839. The results showed that community annoyance of railway noise in Korea is similar to that in Japan, but is more severe than that in European countries.

• 한국의류산업학회지
• /
• 제20권1호
• /
• pp.63-74
• /
• 2018

The purpose of this study is to investigate the differences in riding characteristics and helmet wearing conditions between bicycle and PMV riders so that the basis data necessary for the development of suitable helmets for each group is provided. For this purpose, riding characteristics and helmet wearing conditions of bicycle and PMV users were investigated using online survey method and then the survey results were interpreted by in-depth interview conducted for bicycle and PMV users. The online survey results showed that the PMV group showed shorter driving distance and more driving frequency than bicycle group. This short driving distance was due to the limitation of battery capacity of PMVs. Helmet wearing rate was significantly lower in PMV group than in bicycle group, which was associated with relatively low chances to drive long distance on the motorway. In the PMV group, the 'urban helmets' were mainly used, in which the appearance of helmet was priorized, but in the bicycle group, the 'road cycle helmets' were mainly used, in which the light weight or ventilation were priorized. Urban helmets caused stronger pain and more fitting problems than road cycle helmets because the head shapes of Koreans were not properly applied to the helmet design. Since the fitting problem and pain intensity were the important causes that making PMV users not wear the helmets, it is necessary to develop the urban helmets reflecting the head shapes of Koreans in order to increase the helmet wearing rate of the PMV users.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.148-156
• /
• 2014

The objective of this study is to compare NOx emissions from light duty diesel vehicles measured from on-road tests that conducted under various driving routes and seasonal conditions. We measured real-driving NOx emissions using PEMS, portable emissions measurement system, under the urban, rural and motorway road traffic conditions. On-road tests were repeated at summer, fall and winter season. The accumulated driving distance is more than 1,200 km per each vehicle. Route average NOx emission factors were compared among nine route-season combinations. The emission characteristics of each combinations were investigated using time series mass emission rates and vehicle operation-based emission rates and activities, which is based on U.S. EPA's MOVES model. Most concerned route-season combination is "urban road condition at summer", which shows two to eleven times higher NOx emissions than other combinations. The emission rates and activities under low speed operating conditions should be managed in order to reduce urban-summer NOx. From a NOx control strategy perspective, the exhaust gas recirculation, EGR, is observed to be properly operated under wide range of vehicle driving conditions in Euro-5 vehicles, even if the air conditioner turns on. In high power demanding conditions, the effect of overspeeding could be more critical than that of air conditioner activation.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.123-134
• /
• 2013

Strengthening vehicle emission regulation is one of important policies to improve air quality in urban area. Due to the limitation of specified driving cycles for certification test to reflect real driving conditions, additional off-cycle emission regulations have been adopted in US and being developed in Europe. The driving cycles of US or Europe have been used in emission certification for Korean light-duty vehicles, but it has not been known how well the driving cycles reflect various real driving patterns in Korea. In that point of view, it is required to estimate vehicle emission based on real road driving conditions to raise the effectiveness of vehicle emission regulation in Korea. In this study, real driving emission measurements have been conducted for three Korean light-duty vehicles with PEMS. The driving routes consisted of urban, rural and motorway in Seoul and Incheon. The data have been analyzed with various averaging methods including moving averaging windows method and compared to emission limits set with emission certification modes applied to tested vehicles. The results have shown that the real driving pollutant emissions of a gasoline and a LPG vehicles have been ranged quite lower than those of emission limits on CVS-75 driving cycle. But real driving NOx of a light duty diesel vehicle has been considerably higher than emission limit of NEDC driving cycle. The higher than expected NOx emission of a diesel vehicle might be caused by different strategy to control EGR in real driving condition from NEDC driving.

• Structural Engineering and Mechanics
• /
• 제61권2호
• /
• pp.245-253
• /
• 2017

The increasing lack of good quality soils allowing the development of roadway, motorway, or railway networks, as well as large scale industrial facilities, necessitates the use of reinforcement techniques. Their aim is the improvement of the global performance of compressible soils, both in terms of settlement reduction and increase of the load bearing capacity. Among the various available techniques, the improvement of soils by incorporating vertical stiff piles appears to be a particularly appropriate solution, since it is easy to implement and does not require any substitution of significant soft soil volumes. The technique consists in driving a group of regularly spaced piles through a soft soil layer down to an underlying competent substratum. The surface load being thus transferred to this substratum by means of those reinforcing piles, which illustrates the case of a piled embankment. The differential settlements at the base of the embankment between the soft soil and the stiff piles lead to an "arching effect" in the embankment due to shearing mechanisms. This effect, which can be accentuated by the use of large pile caps, allows partial load transfer onto the pile, as well as surface settlement reduction, thus ensuring that the surface structure works properly. A technique for producing rigid piles has been developed to achieve in a single operation a rigid circular pile associated with a cone shaped head reversed on the place of a rigid circular pile. This technique has been used with success in a pile-supported road near Bourgoin-Jallieu (France). In this article, a numerical study based on this real case is proposed to highlight the functioning mode of this new technique in the case of industrial slabs.