• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.128.3-128
• /
• 2001

In this paper we proposed that the speed of induction motor is controlled by a PI controller, which could control unknown motor using Neural Network for auto-tuning of the PI parameter. The parameters of the PI controller were adjusted to reduce the speed error of the controlled motor. The input parameters of the Neural Network controller are the speed, q-axis current, and speed reference of the induction motor respectively. The usefulness of proposed controller will be confirmed by simulation which we compare with conventional PI controller.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.177-180
• /
• 2000

The accurate values of parameters of an induction motor are required for its high performance control. So far many methods using current sensors voltage sensors and speed sensor have been developed. This paper proposes an identification method of parameters of induction motor only using current sensors.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.6
• /
• pp.776-782
• /
• 2003

This paper describes a newly developed double squirrel cage induction motor in which the rotor is located outside the stator. The outside rotor type brushless dc motor has been used for VTR's head drum and PC's cooling fan, but this kind of induction motor has not been developed yet. The parameters of outside rotor type induction motor were measured from the locked rotor test and no load test. It is possible to determine the parameters which are presented in the steady-state equivalent-circuit of the outside rotor type induction motor. Load test of induction motor was carried out using a dynamometer. For the characteristics of torque, efficiency, power factor and output. the developed double squirrel cage induction motor is compared with the ordinary induction motor It is believed that the results of this paper can be used for the development of the outside rotor type induction motor.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.158-165
• /
• 2004

The DC motor in a vehicle may cause noise and vibration because of high speed revolution, which can make a driver feel uncomfortable. There have been various studies attempting to solve these problems, focusing mostly on the causes of and ways to reduce noise and vibration. It is suggested that the noise in a DC motor may be primarily due to interaction between a brush and a commutator. Brush noise, the most common noise in a DC motor, results from a brush bounced from the surface of the commutator, fluctuation of the friction between the brush and the commutator, and the impact on the brush when passing over slots of the commutator. Based on the noise test, one of the most important design parameters was shown to be the roundness of the commutator. As the DC motor is used, the roundness of the commutator gets bigger with subsequent increase of the level of brush noise and vibration. There must be a threshold in order to prevent the brush noise from getting worse. Using the method of CAE is more efficient than the real test for purposes of looking for various design parameters to maintain the roundness of the commutator. In this study, the design process to reduce the brush noise is presented with the use of a computer model. The design parameters to reduce the brush noise and vibration are proposed by using FEM. The design parameters are used to reduce the noise and vibration of a DC motor and it is verified with the test results on a fan DC motor in a vehicle. This method may be applicable to various DC motor.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.587-590
• /
• 2000

An estimation scheme is used for solving two practical problems of the single current sensor technique. To improve the effect of parameter uncertainties the method that identifies motor parameters for AC motor drive systems using the single current sensor technique is presented. And the parameter identification error and its cause atre examined. It gives good performances for identify in parameters and reconstructing phase currents.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2557-2561
• /
• 2005

The PID controller design and choosing PID parameters according to system response are proposed in this paper. Here PID controller is employed to control DC motor speed and Matlab program is used for calculation and simulation. Choosing PID parameters are demonstrated by several contrast experiments and a way for setting PID parameters values is discussed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.3
• /
• pp.44-51
• /
• 2008

The performance design and analysis of an electric motor for vehicles is very complicated due to the variety of parameters. This paper presents the design of the BLDC motor for electric air compressor in high voltage(42V) system and compares with the characteristics of IPM, SPM type BLDC motor. Futher, optimal design for the electric motor has been carried out using Equivalent Magnetic Circuit and FEM Modelling. By analyzing the design results, it is found that design parameters for BLDC motor provided an useful tool for vehicles motor design.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.6
• /
• pp.948-953
• /
• 2012

The characteristics of an induction motor vary with the number of parameters and the performance relationship between the parameters also is implicit. In case of the induction motor design, we generally should estimate many objective physical quantities in the optimization procedure. In this article, the multi objective design optimization based on genetic algorithm is applied for the three phase induction motor. The efficiency, starting torque, and material cost are selected for the objectives. The validity of the design results is also clarified by comparison between calculated results and measured ones.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.10
• /
• pp.1403-1407
• /
• 2013

This paper presents the method to calculate the motor parameters considering skew in EPS Interior Permanent Magnet Synchronous Motor (IPMSM). The skew is applied to stator or rotor by general technology used for design of reducing noise and vibration in motor. The characteristics analysis of motor including the skew is mostly used by 3D Finite Element Analysis (FEA), though, this analysis is a very time-consuming to perform. Besides, The reliability lacks due to the considerable change of motor characteristics according to the number of elements in 3D FEA. However, analysis time and effort can be saved by characteristic analysis considering skew using 2D FEA. Therefore, in this paper, a quick and accurate method for the calculations of motor parameters considering skew is suggested. The proposed method is verified by the comparison of calculated and experimental results.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.160-162
• /
• 2001

A determining method of the $\Gamma$ type eqivalent circuit parameters of induction motor driven by inverter source is proposed in this paper. The no-load test by rated frequency (60 Hz) and a blocked rotor test by 25% of rated frequency (l5Hz) are performed with inverter source, and the DC resistance of the stator winding is measured. To determine the more accurate parameters, four simultaneous equations obtained from equivalent circuit of the no-load test and blocked rotor test are solved by using initial values which are evaluated from simplified equivalent circuits. The induction motor performances are computed by using these parameters and compared with measured values of the tested motor. Then it is found that the compared results show good agreement between them.