Journal of Electrical Engineering and Technology

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

Optimizing Design Variables for High Efficiency Induction Motor Considering Cost Effect by Using Genetic Algorithm

  • Han, Pil-Wan (Electric Motor Research Center, Korea Electrotechnology Institute) ;
  • Seo, Un-Jae (Dept. of Energy Conversion Engineering, University of Science &Technology) ;
  • Choi, Jae-Hak (Electric Motor Research Center, Korea Electrotechnology Institute) ;
  • Chun, Yon-Do (Electric Motor Research Center, Korea Electrotechnology Institute) ;
  • Koo, Dae-Hyun (Electric Motor Research Center, Korea Electrotechnology Institute) ;
  • Lee, Ju (Dept. of Electrical Engineering, Hanyang Univerity)
  • Received : 2012.01.05
  • Accepted : 2012.07.03
  • Published : 2012.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

The characteristics of an induction motor vary with the number of parameters and the performance relationship between the parameters also is implicit. In case of the induction motor design, we generally should estimate many objective physical quantities in the optimization procedure. In this article, the multi objective design optimization based on genetic algorithm is applied for the three phase induction motor. The efficiency, starting torque, and material cost are selected for the objectives. The validity of the design results is also clarified by comparison between calculated results and measured ones.

Keywords

References

  1. M. Deivasahayam, "Energy Conservation through Efficiency Improvement in Squirrel Cage Induction Motors by Using Copper Die Cast", International Conference of energy efficiency in motor driven systems (eemods'05), Vol. 1, pp.92-101, September, 2005, Heidelberg, Germany.
  2. J. Haataja, J. Pyrhonen, "Improving three-phase induction motor efficiency in Europe", Power Engineering Journal, Vol. 12, pp. 81-86, 1998. https://doi.org/10.1049/pe:19980208
  3. J. Appelbaum, E. F. Fuchs, and J. C. White, "Optimization of three-phase induction motor design", IEEE Trans. Energy Conversion, Vol. EC-2, pp. 407- 422, Sept. 1987. https://doi.org/10.1109/TEC.1987.4765866
  4. G. Madescu, I. Bolea, and T. J. E. Miller, "An analytical iterative model (AIM) for induction motor design", in conf. Rec. IEEE-IAS Annu. Meeting, San Diego, CA, Vol. I, pp. 556-583, 1996.
  5. K. Deb, A. Pratap, S. Agarwal, and T. Meyarivan, "A Fast and Elitist Multiobjective Genetic Algorithm: NSGA-II" IEEE Trans. Evol. Computer, vol. 6, pp. 182-197, April, 2002. https://doi.org/10.1109/4235.996017
  6. K. Deb, A. Anand, and D. Joshi, "A Computationally Efficient Evolutionary Algorithm for Real-Parameter Optimization," Evol. Computer, Vol. 10, No. 4, pp. 371-395, winter, 2002. https://doi.org/10.1162/106365602760972767
  7. V. B. Honsinger, "Sizing equations for electrical machinery," IEEE Trans. on Magnetics, Vol. EC-2, No. 1, pp. 116-121, March, 1987
  8. I. Boldea and S.A. Nasar, The induction machine handbook. Boca Raton: CRC Press, 2002.
  9. IEEE Std. 112, "IEEE Standard Test Procedure for Polyphase Induction Motors and Generators," 2004.
  10. IEC 60034-2-1, "Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles" 2007.
  11. E. B. Agamloh, "An Evaluation of Induction Machine Stray Load Loss From Collated Test Results", IEEE Trans on Industry App., Vol. 46, No. 6, Nov./Dec., 2010.
  12. C. G. Veinott, Theory and Design of Small Induction Motors, New York,: McGraw-Hill Book, 1959.
  13. T. Takeuchi, Electric Machine design, Ohmsha, 1979.

Cited by

  1. Measurement and Comparison of Iron Loss in Bonded- and Embossed-Type Segmented Stator Cores for IPMSM vol.9, pp.6, 2014, https://doi.org/10.5370/JEET.2014.9.6.2013
  2. Measurement of Stator Core Loss of an Induction Motor at Each Manufacturing Process vol.9, pp.4, 2014, https://doi.org/10.5370/JEET.2014.9.4.1309